Panasonic CF-20 series Manual de usuario

Personal Computer

Model No. CF-20 Series

Operating Instructions - Reference Manual

We recommend that this Reference Manual be printed.

Disclaimer

Computer specifications and manualsare subject to change without notice. Panasonic Corporation assumes no liability for damage incurred directly or

indirectly from errors, omissions or discrepancies between the computer and the manuals. Refer for the latest information about optional products to the

catalogs, etc.

Trademarks

Microsoft, Windows, and the Windows logo are registered trademarks or trademarks of Microsoft Corporation of the United States and/or other

countries.

Intel, Core, and PROSet are either registered trademarks or trademarks of Intel Corporation.

SDXC and microSDXC Logos are trademarks of SD-3C, LLC.

MobileMark®is a U.S. Registered Trademark of the Business Applications Performance Corporation.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarksof HDMI Licens-

ing Administrator, Inc. in the United States and other countries.

Bluetooth®is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic Corporation.

Names of products, brands, etc., appearing in thismanual are trademarks or registered trademarksof their respective own companies.

Panasonic Corporation

Osaka, Japan

Web Site : https://panasonic.net/cns/pc/

HS0318-2088

20170267ZCD

Introduction

Illustrations and Terminology in this manual

This manual explains using the default setting.

In principle, this manual explains based on the following conditions:

When the tablet and keyboard base have been installed

When the keyboard and Touchpad are used for operation

Some illustrations are simplified to help your understanding and may look different from the actual unit.

Some types of software are automatically updated, and differences may occur from descriptions in this manual.

If you do not sign in as an administrator, you cannot use some functions or cannot displaysome screens.

Thismanual explainsoperation procedures using the Touchpad or mouse as typicalexamples. In addition, you can touch the display screen to

operate the computer.

When using the touch operation, please replace the terms as described below, and read the instructions.

Operation terms to be replaced:

Click → Touch

Double-click → Double-touch

Right-click → Touch and hold (Long touch)

Terms and illustrations in these instructions.

CAUTION: Conditions that may result in minor or moderate injury.

NOTE: Useful and helpful information.

≪Enter≫: This means to press the Enter key.

≪Fn≫+≪F7≫:

This illustration means to press and hold ≪Fn≫key, and then press ≪F7≫key.

The display of the key may be different from this manual according to the keyboard used. (e.g. "Delete" instead of "Del")

- :

Click (Start) and then click (Power).

In these instructions, the names are referred as follows.

“Windows 10 Pro 64-bit” as “Windows” or “Windows 10”

“Multilanguage User Interface” as “MUI”.

The Digitizer + Touch Screen (Capacitive) as the “digitizer”, and the Touch Screen as the “touchscreen”.

The digitizer pen and the stylus as the “pen (included)”.

The computer screen supporting touching methods (using stylus / your fingers) is referred to as the "screen".

In thismanual, the tablet mode refers to the status where only the tablet is used.

Regarding Windows 10

Desktop mode and Tablet mode

Windows 10 offers the desktop mode in which operation is performed using the keyboard or Touchpad, and also the tablet mode optimized for the touch

panel operation.

The mode can be switched by clicking (Notification), and then clicking (Tablet mode) tile.

In thismanual, the tablet mode may refer to the status when the tablet detached from the keyboard base is used.

In the tablet mode, operationsfrom the Start screen are explained.

N O T E

If some icons do not appear on the taskbar, perform the following operations.

1. Touch and hold the taskbar.

2. Select the item to display.

Screen Messages

Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,

[Flight mode] may be displayed instead of [Airplane mode] in some language preference)

Opening the Control Panel

1. Click (Start) - [Windows System] - [Control Panel].

Opening the Settings

1. Click (Start) - (Settings).

Alternatively, click (Settings) in the tablet mode.

Latest Information on Windows 10

When Microsoft®Windows®10 is updated, the screen display or operation procedures maybe changed.

For the latest information on Windows 10, see the following web page.

http://pc-dl.panasonic.co.jp/itn/addendum/

Sound and Video

Sound (e.g. MP3, WMA) and video (e.g. MPG, WMV) recorded in SD Memory Cards may be interrupted during playback. If this hap-

pens, copy them to the flash memory drive and play back.

Depending on the processing status on Windows, sound may be interrupted at Windows startup. You can mute the sound at startup.

The startup sound is muted by the following steps.

1. Click (Start) - [Windows System] - [Control Panel] - [Hardware and Sound] - [Sound] - [Sounds].

Or, click (Start) - (Settings) - [Devices] - [Bluetooth & other devices] - [Sound settings] - [Sounds].

Or, click (Settings) - [Devices] - [Bluetooth & other devices] - [Sound settings] - [Sounds] in the tablet mode.

2. Remove the check mark from [Play Windows Startup sound], and click [OK].

When high-frequency sound occurs

If high-frequencysound occurs while using the computer, checkthe settings for the USB power saving function.

Set [USB selective suspend setting] to [Enabled].

1. Click (Start) - (Settings) - [System] - [Power & sleep] - [Additional power settings].

2. Click [Change plan settings] of the current power plan.

3. Click [Change advanced power settings].

4. In [Advanced settings], double-click [USB settings].

5. Double-click the displayed [USB selective suspend setting].

6. Change settings of [On battery] and [Plugged in] to [Enabled].

7. Click [OK] and exit the “Advanced settings” screen.

About the Ambient Light Sensor

The ambient light sensor is used to adjust the display screen brightness automatically.

To configure the automatic adjustment function, proceed as follows.

1. Click (Start) - (Settings) - [System] - [Display].

Alternatively, click (Settings) - [System] - [Display] in the tablet mode.

2. Add the check mark to [Change brightness automatically when lighting changes] under “Brightness and color”.

Windows Update

You can update to the latest patches and service packs for Windows with the following menus.

1. Click (Start) - (Settings) - [Update & Security] - [Windows Update].

Alternatively, click (Settings) - [Update & Security] - [Windows Update] in the tablet mode.

2. Click [Check for updates].

Do not apply“Driver Updates” even if a message to update a driver appears. If a driver update is required, contact your technicalsupport office.

Create a Recovery Disc

You can make a recovery disc for preinstalled software.

The recovery discreturns the flash memory drive to the factory default. To create a backup of the recent state of the flash memory drive, refer to Flash

Memory Backup/Restore Function.

Preparation

Blank discs (About usable types of discs and required numbers of discs, refer to the screen.)

USB memory device can also be used as a recovery disc.

Prepare the commercially available optical drive.

Connect the AC adaptor and do not remove it until the operation is complete.

Close all applications except for this utility.

Remove all peripherals (except for the commercially available optical drive).

Turn off the wireless function.

C A U T I O N

nUSB memory device can also be used as a recovery disc.

nDo not perform the following operations until creating the recovery disc is complete.

Shut down or restart Windows.

Enter sleep or hibernation.

Remove the commercially available optical drive.

nIf you interrupted creating a recovery disc, a message of failure may appear in step 9 screen below. In this case, create a new recov-

ery disc again.

1. Restart the computer, and sign in to Windows as an administrator.

2. Connect the commercially available optical drive to the USB Port.

3. Set a disc into the commercially available optical drive.

4. Click (Start) - [Panasonic PC Recovery Disc Creation Utility].

Alternatively, click [Panasonic PC Recovery Disc Creation Utility] in the tablet mode.

If “User Account Control” is displayed, click [Yes].

C A U T I O N

nDo not remove the tablet during operation.

5. Click [Next].

Read the notice before creating the recovery disc(s).

6. Confirm on-screen information ([Select OS Image] and [Number of discs required]).

Click [Next].

7. Select the disc type.

8. Click [Next].

Select the writing speed, and click [OK].

9. When [Recovery disc #1 complete.] is displayed, remove the disc and write contents of the disc on the label side.

Do not use sharp objects that may leave a mark.

10. Click [OK].

Following on-screen instructions, remove or replace the discs.

11. Click [OK] on [All recovery discs complete.] screen.

N O T E

nThe disc created with this utility is only for this computer. You cannot use for others.

nAdditional applications cannot be recovered even if you use a recovery disc created with this utility.

nIf you fail to create a recovery disc or an error message appears, try either of the following procedures.

Insert the disc correctly.

Check the disc condition.

Restart the computer and try to create a recovery disc again.

Contact Panasonic Technical Support.

About the Partition Structure

You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new partition.

In the default setting, you can use a single partition.

C A U T I O N

nDo not add or delete partitions in Windows 10, as the Windows area and recovery partition must be adjacent to each other in Windows

10.

Flash Memory Backup/Restore Function

Panasonic Corporation will bear no responsibility for any damage suffered (including lossof data) as a result of the use of this function.

Creating a Backup of the Flash Memory Data

You can create a backup of the flash memory data, which can be used to recover from hardware failure.

Thisfunction creates a backup of the recent state of the flash memory. To return the factory default, use a recovery disc. ( Create a Recovery Disc)

To create a backup of the flash memory to another storage media (e.g., external hard disk).

Connect the storage media, and follow the steps below.

1. Open the Control Panel, and then click [System and Security] - [File History].

To open the Control Panel, proceed as follows.

Click (Start) - [Windows System] - [Control Panel].

2. Click [System Image Backup].

Follow the on-screen instructions.

N O T E

nConnect the AC adaptor and do not remove it until backup is complete.

Restoring the Flash Memory Data

Connect the storage media that created the backup.

1. Click (Start) - (Settings) - [Update & Security] - [Recovery].

Alternatively, click (Settings) - [Update & Security] - [Recovery] in the tablet mode.

2. Click [Restart now] under “Advanced startup”*1.

3. Click [Troubleshoot] - [Advanced options].

4. Click [System Image Recovery].

Follow the on-screen instructions.

*1 : Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,

[Advanced start-up] may be displayed instead of [Advanced startup] in some language preference.)

Description of Parts

<Front>

Tablet

Keyboard Base

A. Wireless WAN Antenna / GPS Antenna

B. Microphone

C. RGB Camera

D. Ambient Light Sensor

E. Camera Indicator

F. IR LED

G. IR Camera

H. LCD

I. Wireless LAN Antenna / Bluetooth Antenna

J. Wireless LAN Antenna

K. Tablet Buttons

L. LED Indicator

: Battery 1 Status

: Power Status

Off: Power off/Hibernation

Green: Power on

Blinking green: Sleep

Blinking green rapidly:

Cannot power on or resume due to low temperature.

: Wireless ready

This indicator lights when Wireless LAN, Bluetooth, and/or Wireless WAN are connected and ready. It does not necessarily indicate the

On/Off condition of the wireless connection.

: Caps Lock indicator

: NumLk (numeric lock) indicator

: ScrLk (scroll lock) indicator

M. Power Switch

Otros manuales para CF-20 series

Tabla de contenidos

Otros manuales de Computadora portátil de Panasonic

Panasonic

Panasonic Toughbook CF-27EB6GCAM Manual de usuario

Panasonic

Panasonic Toughbook CF-17TR42AAM Manual de usuario

Panasonic

Panasonic Toughbook CF-19KDRAXCM Manual de usuario

Panasonic

Panasonic Toughbook CF-30CCSQZBM Manual de usuario

Panasonic

Panasonic CF-T8 series Diagrama de cableado

Panasonic

Panasonic CF-27 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-30C3DAZBM Manual de usuario

Panasonic

Panasonic CF-74CCBEBBM - Toughbook 74 - Core Duo 1.83... Manual de usuario

Panasonic

Panasonic Toughbook CF-52EKMBGAM Manual de usuario

Panasonic

Panasonic Toughbook S10 Manual de usuario

Panasonic

Panasonic CF-W4GWCZZ Manual de usuario

Panasonic

Panasonic Toughbook CF-74JDMBD2M Manual de usuario

Panasonic

Panasonic Toughbook CF-19CHBAXBM Manual de usuario

Panasonic

Panasonic Toughbook CF-W2DWAZZKM Manual de usuario

Panasonic

Panasonic Toughbook CF-48 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-28 Series Manual de usuario

Panasonic

Panasonic CF-07 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-18 Series Diagrama de cableado

Panasonic

Panasonic Toughbook CF-28PRJGZKM Manual de usuario

Panasonic

Panasonic CF-53AUGZK1M Manual de usuario

Panasonic

Panasonic CF-74 Series Manual de usuario

Panasonic

Panasonic CF-19CHGACJM - Toughbook 19 Touchscreen PC... Manual de usuario

Panasonic

Panasonic Toughbook CF-27FCCKFAM Manual de usuario

Panasonic

Panasonic Toughbook CF-48E4KFUDM Manual de usuario

Manuales populares de Computadora portátil de otras marcas

HP ze2401xt - Pavilion Notebook PC Manual de usuario

Velocity

Velocity NoteMagix M10 Manual de usuario

Dell

Dell Alienware 17 R2 Manual de usuario

Toshiba

Toshiba A105-S2236 Manual de usuario

HP ENVY 17 Manual

Winbook

Winbook LM Manual de usuario

Dell

Dell Inspiron 1464 Manual de usuario

Dell

Dell Inspiron 15R 5537 Manual de usuario

HP PROBOOK 4520S Manual

Dell

Dell Latitude ATG D620 Manual de usuario

Sony

Sony VAIO PCG-FX270 Manual de usuario

Dell

Dell Latitude 7310 Manual de usuario

Dell

Dell Precision GU806 Manual de usuario

Sony

Sony VAIO PCG-R505JLK Manual de usuario

Lenovo

Lenovo THINKPAD X32 Manual de usuario

HP Compaq tc4200 Guía de inicio rápido

Toshiba

Toshiba mini NB300 Manual de usuario

Lenovo

Lenovo ThinkPad X201 Tablet Manual