Panasonic Toughbook CF-30CCSQZBM Manual de usuario

Reference Manual

Personal Computer

Model No. CF-30 Series

We recommend that this Reference Manual be printed.

Key Combinations

NOTE

Do not repeatedly press the keys in quick succession.

Do not use the key combinations together with touch pad (external mouse), touchscreen (only for model with touch-

screen) or other key operations.

Do not use the key combinations before you log on to Windows. Wait until the hard disk drive indicator turns off.

On the Setup Utility screen, you can use the key combinations of

and

The key combinations may not work with some applications.

The popup menu icon appears after logging on to Windows. It may not appear in some application conditions (e.g.,

when [Command Prompt] is set to “Full Screen”).

Key Function Popup menu icon

LCD brightness

(

= down /

= up)

Display switching (page 37)

(When an external display is connected)

Internal LCD Simultaneous display External display

CAUTION

Do not press any keys until the display has finished switching.

Do not use this function:

• When an external display is not connected.

• When playing motion video such as DVD or MPEG.

• When using the Extended Desktop.

• When showing a game screen such as pinball.

*1 Speaker on/off

NOTE

Beeps do not sound if you turn off the speaker sound.*2

OFF

(MUTE)

Key Combinations

*1 These key combinations are disabled when [Concealed Mode] is enabled.

*2 Even if [Sound] is set to [OFF] on the [Concealed Mode Configuration] menu, icon on the notification area and [Device volume]

display do not show mute state.

However, audio from the speaker is not heard.

Volume

(

= down /

= up)

Activate standby (page 8)

Concealed Mode on/off

You can select on/off of LCD Backlight, LED, Sound*2, Wireless Radio and Backlit

Keyboard.

NOTE

You have to set [Concealed Mode] to [Enabled] in Setup Utility

(page 72).

You can set the devices turned off in [Concealed Mode] with Setup Utility

(page 72).

If you press

in succession, the Concealed Mode may not be

switched. More than 4 minutes interval is necessary to switch on/off.

Remaining battery charge (page 16)

F10

Activate hibernation (page 8)

Key Function Popup menu icon

Key Combinations

You can make 2 settings:

•Fn key lock

is locked (pressed-down) until you press another key. Use this when pressing difficult key combinations.

• Popup menu icon on/off

1Start up the Hotkey Settings.

Click [start] - [All Programs] - [Panasonic] - [Hotkey Settings].

2Make the settings.

[Use Fn key lock]

When using an

key combination

APress

once. (Locked)

BPress another key. (Lock released)

When using successive

key combinations

APress

twice. (Locked)

BPress another key.

Fn key remains locked until you press

again.

[Notification]

[Make sounds when Fn key is pressed]*3

[Show status on screen]: Displays the Fn key status on the notification area.

•:

is locked.

•:

is not locked.

[Disable popup]

The popup menu icon will not be displayed.

3Click [OK].

NOTE

You can have different settings for each user.

*3 If the speaker is muted or [Sound] is turned off in [Concealed Mode Configuration], beeps do not sound.

Hotkey Settings

Touchscreen

You can use the touchscreen function to perform the same operation as the touch pad and mouse. Touch the screen surface

with the stylus (included).

To right-click

AClick on the notification area.

changes to .

BClick the object you want to right-click.

returns to .

NOTE

You need to make the following setting for each user.

AClick [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Panel Configuration].

BSelect the settings, and then click [OK].

Do not add a check mark to [Delete Cursor] since the display may be distorted.

If you add a check mark for [Use] in [Hold [Ctrl] key down + Touch the screen] of [Touch Panel Configuration], touching

the screen may always be recognized as a right-click. To return to the normal operation, press

Ctrl

on the keyboard.

The touchscreen function does not work in the Setup Utility, in the full screen of [Command Prompt].

1Run [Touch Screen Calibration Utility].

Click [start] - [All programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility].

2Using the stylus, touch each of the 12 “+” target marks one by one until it blinks, and then

press

Enter

3Press

Enter

NOTE

Perform the touchscreen calibration for each user.

Touchscreen Calibration

Panasonic Hand Writing

You can make a bitmap file (.bmp) of a simple character and a figure such as signature by handwriting on the touch pad and

the touchscreen (only for model with touchscreen).

CAUTION

Do not use the Fast User Switching function while Panasonic Hand Writing is active.

If you install other pointing devices (e.g., commercially available mouse driver) and overwrite the touch pad driver,

Panasonic Hand Writing will not work.

NOTE

The display of Panasonic Hand Writing may be distorted if the number of display colors is changed. Right-click on

the notification area and click [Exit Panasonic Hand Writing], and then restart Panasonic Hand Writing.

Panasonic Hand Writing may not work properly if another application software is active. In this case, close the applica-

tion software and try handwriting again.

1Double-click on the notification area.

Alternatively you can click [start] - [All Programs] - [Panasonic] - [Panasonic Hand Writing].

NOTE

Select the image size before handwriting by clicking [Option] - [Window size]. If you change the size after handwriting,

the image quality will become lower.

You can copy the bitmap image by clicking [Edit] - [Copy], and paste it in another application software that supports bit-

map format.

The touch pad mode will not work properly when using the extended desktop.

The touch pad mode will be canceled in the following cases.

• Switching to another application

• Resuming from standby or hibernation

•Pressing

Alt

• Touching the touchscreen (only for model with touchscreen)

An external mouse or trackball connected via the port replicator (optional) will not work during handwriting in the touch

pad mode.

Starting Panasonic Hand Writing

Standby and Hibernation Functions

The standby or hibernation function allows you to shut off the computer without closing programs and documents. You can

quickly return to the programs and documents that you were working on before standby or hibernation.

1Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -

[Advanced].

2Select [Stand by] or [Hibernate] for [When I close the lid of my portable computer:] /

[When I press the power button on my computer:], and then click [OK].

NOTE

You do not need to make the setting if you use the Windows menu to enter standby or hibernation.

Connect the AC adaptor if the computer will be in standby mode for a long period of time. If you cannot use the AC adap-

tor, use hibernation instead.

Using standby or hibernation repeatedly may cause malfunction of the computer. To stabilize computer operation, restart

Windows regularly (about once a week) without using standby or hibernation.

Save the necessary data.

Close files you have opened from removable disk and network drive.

The password you set in the Setup Utility is not requested at resuming. You can use the Windows password for security in

standby or hibernation.

AClick [start] - [Control Panel] - [User Accounts], and select the account.

BClick [Create a password] and set the password.

CClick [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced], and add the check mark

in [Prompt for password when computer resumes from standby].

Function Data is saved to Recovery time Power supply

Standby Memory Short Required. (If power is not supplied, all data will be lost.)

Hibernation Hard disk Rather long Not required. (However power is slightly consumed to

keep the hibernation.)

Setting Standby or Hibernation

Precautions

Standby and Hibernation Functions

Do not enter standby or hibernation in the following conditions, otherwise the data or file may be corrupted, standby or

hibernation may not work, or malfunction may occur in the computer or the peripheral devices.

• When any of the multimedia pocket device indicator *1, the hard disk drive indicator and the SD Memory Card indi-

cator is on.

• When playing/recording audio files or displaying motion video such as MPEG files.

• When playing a DVD-Video.

• When writing to a disk.

• When using communication software or network functions.

• When using a PC Card.

(If the card fails to work normally, restart the computer.)

• When an external mouse is connected to the serial port.

The computer does not enter standby or hibernation immediately after resuming. Wait approximately one minute.

*1 Except when using a second battery pack

To enter standby or hibernation

1Close the display, or slide the power switch (A) until a beep*2

sounds.

Standby: The power indicator (B) blinks green.

Hibernation: The power indicator (B) goes off.

You can alternatively use the Windows menu to enter standby or hibernation. To

enter standby, click [start] - [Turn Off Computer] - [Stand By]. To enter hiberna-

tion, click [start] - [Turn Off Computer], then press and hold

Shift

and click

[Hibernate].

CAUTION

While the computer is entering standby or hibernation

Do not:

• Touch the keyboard, touch pad, touchscreen (only for model with touchscreen), or power switch.

• Use an external mouse or other peripheral device.

• Connect or disconnect the AC adaptor.

• Close or open the display.

Wait until the power indicator blinks green (standby) or goes off (hibernation).

It may take 1 or 2 minutes to enter standby or hibernation.

Entering/Resuming from Standby or Hibernation

Standby and Hibernation Functions

At the beep*2, immediately release the power switch. If you slide and hold the power switch for longer than 4 seconds,

the computer will forcibly shut down and unsaved data will be lost even if you have set [Shut down] in [When I press

the power button on my computer] (page 7 “Setting Standby or Hibernation”).

In standby or hibernation

Do not attach or remove a multimedia pocket device (excluding a second battery pack) and peripheral device. Doing

so may cause malfunction.

Power is consumed in standby mode. Power consumption may increase when a PC Card is inserted. When power is

exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the standby function.

Do not turn on/off the wireless switch.

*2 If the speaker is muted or [Sound] is turned off in [Concealed Mode Configuration], beeps do not

sound.

To resume from standby or hibernation

1Open the display, or slide the power switch (A).

When [Stand by] or [Hibernate] is selected as the setting for [When I close the

lid of my portable computer] (page 7), you can resume operation opening the

display.

CAUTION

Do not perform the following operations until resuming is complete. After the display has resumed, wait approximately

30 seconds (normally) or 60 seconds (when the computer is on a network).

• Touch the keyboard (except for password input), touch pad, touchscreen (only for model with touchscreen), or power

switch.

• Use an external mouse or other peripheral device.

• Connect or disconnect the AC adaptor.

• Close or open the display.

• Shut down or restart Windows.

• Enter standby or hibernation.

Saving Power

You can extend battery life and save power also during AC adaptor usage.

Use the methods below to reduce power consumption.

Change [Power Options]

Click [start] - [Control Panel] - [Performance and Maintenance] -

[Power Options] to select [Max Battery] under [Power schemes].

While [Portable/Laptop] is selected under [Power Options] as the fac-

tory default, selecting [Max Battery] will further reduce power con-

sumption.

Also, make detailed settings such as reducing the time entered in the

[Turn off monitor] setting.

Use Power Saving Utility (page 11)

Power Saving Utility provides additional power saving functions not

available in [Power Options].

Press

to reduce LCD brightness

Reducing internal LCD brightness will reduce power consumption.

Turn off the computer when it is not in use

You can also turn off only the wireless LAN or Bluetooth power.

Disconnect external devices (USB devices, PC cards, external

mice, etc.) that are not being used

Use Standby/Hibernation

Press

to set the computer to standby or

F10

to set it

to hibernation when you have to leave the computer. This shuts

down computer operation to reduce power consumption.

Disable Wake Up from wired LAN and Wake Up from wireless LAN functions when they are not needed. This reduces

power consumption in Standby/Hibernation.

To confirm current settings, click [start] - [All Programs] - [Panasonic] - [Power Saving Utility] to view [Wired LAN standby

power saving function] or [Wireless LAN standby power saving function].

Reducing Power Consumption

Este manual sirve para los siguientes modelos

158

Tabla de contenidos

Otros manuales de Computadora portátil de Panasonic

Panasonic

Panasonic CF-53 Manual de usuario

Panasonic

Panasonic The Toughbook 52 Manual de usuario

Panasonic

Panasonic CF-28MCFAZ Manual de usuario

Panasonic

Panasonic CF-Y5 Series Diagrama de cableado

Panasonic

Panasonic CF-30 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-74CCB02BM Manual de usuario

Panasonic

Panasonic Toughbook CF-U1A1E1Z2M Manual de usuario

Panasonic

Panasonic Toughbook CF-52GFNBX2M Manual de usuario

Panasonic

Panasonic CF-31JEGAXDM Manual de usuario

Panasonic

Panasonic Toughbook CF-R1P82ZVQM Manual de usuario

Panasonic

Panasonic Toughbook CF-48E4KFUDM Manual de usuario

Panasonic

Panasonic ToughBook CF-72 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-52AJC15AM Manual de usuario

Panasonic

Panasonic Toughbook CF-72V3JUZQM Manual de usuario

Panasonic

Panasonic CF-W4 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-45KJ6GJEM Manual de usuario

Panasonic

Panasonic Toughbook CF-C1ADACZGM Manual de usuario

Panasonic

Panasonic Toughbook CF-19PJRFXAM Manual de usuario

Panasonic

Panasonic Toughbook CF-63LYJ8AAM Manual de usuario

Panasonic

Panasonic CF-Y2 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-37LB82BAM Manual de usuario

Panasonic

Panasonic Toughbook CF-71DJ48AAM Manual de usuario

Panasonic

Panasonic CF-52 Mk2 Manual de usuario

Panasonic

Panasonic Toughbook CF-M34126YN3 Manual de usuario

Manuales populares de Computadora portátil de otras marcas

HP ze2401xt - Pavilion Notebook PC Manual de usuario

Velocity

Velocity NoteMagix M10 Manual de usuario

Dell

Dell Alienware 17 R2 Manual de usuario

Toshiba

Toshiba A105-S2236 Manual de usuario

HP ENVY 17 Manual

Winbook

Winbook LM Manual de usuario

Dell

Dell Inspiron 1464 Manual de usuario

Dell

Dell Inspiron 15R 5537 Manual de usuario

HP PROBOOK 4520S Manual

Dell

Dell Latitude ATG D620 Manual de usuario

Sony

Sony VAIO PCG-FX270 Manual de usuario

Dell

Dell Latitude 7310 Manual de usuario

Dell

Dell Precision GU806 Manual de usuario

Sony

Sony VAIO PCG-R505JLK Manual de usuario

Lenovo

Lenovo THINKPAD X32 Manual de usuario

HP Compaq tc4200 Guía de inicio rápido

Toshiba

Toshiba mini NB300 Manual de usuario

Lenovo

Lenovo ThinkPad X201 Tablet Manual