Panasonic EYFLF1XC Manual de usuario

1. Warning・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・2

2. Specifications・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・2

3. Troubleshooting Guide・・・・・・・・・・・・・・・・・・・・・・・ 3

4. Disassembly and Assembly Instructions・・・・・・・・ 6

5．Exploded View and Replacement Parts List・・・・・ 8

Model No. EYFLF1XC

EYFLF2XC

EYFLF1XP

EYFLF2XP

EYFLF1RC

EYFLF2RC

Europe

TABLE OF CONTENTS

ORDER NO. PTD2306E01AE

Cordless Impact Wrench

2023

2

This product is similar to EYFLA8A/8P with differences in some parts.

The main differences are as follows:

(1) Shaft cover block (with two bearings)

(2) Anvil assembly (of a split structure)

(3) Driving shaft assembly(with hammer, hammer spring, and shock-absorbing rubber)

(4) Motor block (with winding change)

(5) Module assembly (with EYFLF1-dedicated software)

Reference Information.

RC RC

3

4

3.2. Trial Operation (after checking Troubleshooting Guide).

5

Note:

・If you have any questions regarding the operation, please refer to the Instruction Manual for clarification.

・If the unit does not operate as described in the Instruction Manual, reassemble the unit and check for any faulty assembly or

missing parts.

【Method of confirmation 】

2. Confirm that the identification of the main unit is displayed on the operation panel display.

1. Press the D button on the wireless remote control once.

3.2.4 Integrity

• With the switch activated, shake the tool back and forth and up and down and verify that its sound does not change excessively.

•Verify that there is no dirt, scratching, or other damage on the tool’s exterior from the repair process.

【Initializing all settings (revert settings to factory defaults 】

Refer to the instruction manual of Initializing all settings section.

4 Disassembly/Assembly Instructions

6

*Refer to the EYFLA9C, EYFLA8A, and EYFLA8P Service Guide.

*Take note of the disassembly and reassembly procedures due to differences, which are detailed from this page onwards.

*Refer to the exploded view diagram for the configuration of parts.

Metal pin

4.1 The metal pin of the anvil has a mounting direction.

4.2 How to replace detent pin, detent pin spring and press fit pin (for EYFLF1XP EYFLF2XP)

【Metal pin orientation 】

Set the metal pin so that C0.6 will be on the rear side of the anvil.

Metal pin

7

4.3 Checking and setting the Module assembly’s DIP switches.

EYFLF1 EYFLF2

4.4 Precautions when applying the grease.

Refer to EYFLA9C/EYFMA2C Service Guide 4.6 and 4.8 except for the figures below.

Apply grease(doubrex)to the outer

circumference of the drive shaft (hatched

area).

Apply the grease(doubrex)to the steel ball side of the thrust plate.

Apply grease(doubrex)to approximately a ⌀5-mm area on each side of

the anvil (where the anvil comes into contact with the claw part of the

hammer).

Apply grease(doubrex)to the fitting surface

(hatched area) at the front of the anvil.

Apply grease(doubrex)to the fitting surface

(hatched area) at the rear of the anvil.

Apply grease(doubrex)to the indicated by

the shaded area.

8

5. Exploded View and Replacement Parts List

5.1 Exploded View for EYFLF1XC EYFLF2XC

9

5.2. Replacement Parts List

Model No. : EYFLF1XC EYFLF2XC Parts List

10

5. Exploded View and Replacement Parts List

5.3 Exploded View for EYFLF1XP EYFLF2XP

05

Este manual sirve para los siguientes modelos

5

Otros manuales de Atornillador de impacto de Panasonic

Panasonic

Panasonic EYFMA2CR Manual de usuario

Panasonic

Panasonic EY7552 Manual de usuario

Panasonic

Panasonic EY75A7 Manual de usuario

Panasonic

Panasonic EYFLA4A Manual de usuario

Panasonic

Panasonic EY75A7 Manual de usuario

Panasonic

Panasonic EY76A1 Manual de usuario

Panasonic

Panasonic EY75A1X Manual de usuario

Panasonic

Panasonic EY75A1 Manual de usuario

Panasonic

Panasonic EYFLA4AR Manual de usuario

Panasonic

Panasonic EY7206 - 12V IMPACT DRIVER Manual de usuario

Panasonic

Panasonic EY75A1 Manual de usuario

Panasonic

Panasonic EY75A7 Manual de usuario

Panasonic

Panasonic EY6506-U1 Manual de usuario

Panasonic

Panasonic EYFLA3J - DRILL - MULTI LANGUAGE Manual de usuario

Panasonic

Panasonic EY7542 - CORDLESS IMPACT WRENCH Manual de usuario

Panasonic

Panasonic EY7201-X8 Manual de usuario

Panasonic

Panasonic EY-6506 Manual de usuario

Panasonic

Panasonic EY7542 - CORDLESS IMPACT WRENCH Manual de usuario

Panasonic

Panasonic EY7270 Manual de usuario

Panasonic

Panasonic EY76A1 Manual de usuario

Panasonic

Panasonic EY7546 Manual de usuario

Panasonic

Panasonic EY6588 Manual de usuario

Panasonic

Panasonic EY7202 - 12V IMPACT DRIVER Manual de usuario

Panasonic

Panasonic EY75A7X57 Manual de usuario

Manuales populares de Atornillador de impacto de otras marcas

stayer

stayer IW500D Manual de usuario

Makita

Makita DTD152 Manual de usuario

Milwaukee

Milwaukee M12 FID Manual de usuario

Grizzly

Grizzly H6140 Manual de usuario

Makita

Makita BTW450 Manual de usuario

Ozito

Ozito LID-3000 Manual de usuario

Astro Pneumatic Tool

Astro Pneumatic Tool 1812 Manual de usuario

Greenlee

Greenlee HW3 Manual de usuario

Sthor

Sthor 57091 Manual de usuario

Makita

Makita DTD145 Manual de usuario

Hilti

Hilti SIW 2-A12 Manual de usuario

Ryobi

Ryobi R18IW3 Manual de usuario

Parkside

Parkside PDSSA 20-Li A1 Manual de usuario

Flex

Flex FX1471 Manual de usuario

SATA

SATA 51075C Manual técnico

Cembre

Cembre NR-11P Manual de usuario

Makita

Makita BTP131RFE Manual de usuario

DeWalt

DeWalt XR Li-ion DCF902 Manual de usuario