Panasonic FY-E15PM1 Manual técnico

FY-E15PM1 FY-E25PM1 FY-E35PM1

FY-E15PM1L FY-E25PM1L FY-E35PM1L

CONTENTS:

SAFETY PRECAUTIONS ·························· 3

INSTALLATION CAUTIONS ··················· 4 7

OPERATING REQUIREMENTS ··················· 8

FEATURES ·······································9

OPTIONAL ACCESSORIES ······················ 9

PART NAME AND DIMENSIONS············10 13

HOW TO INSTALL······························· 14

TEST RUN ······································· 15

OPERATION····································· 15

USE AND MAINTENANCE INSTRUCTIONS

···16 18

HOW TO MAINTENANCE ···················18 20

WIRING DIAGRAM ··························21 23

TROUBLESHOOTING ··························· 23

SPECIFICATIONS ···················· BACK COVER

Operation Instruction·················· 1 book

(Please be sure to give them to customer)

Please read these instruction carefully before attempting to install, operate or service the

panasonic product. Please carefully read “INSTALLATION CAUTIONS”(P. 4~7) of this

instructions before installation. Failure to comply with instructions could result in personal

inury or property damage. Please explain to users how to operate and maintain the product

after instruction, and this booklet should be presented to users. Please carefully read

“USE AND MAINTENAANCE INSTRUCTIONS”(P. 16~18) of this instructions before operation.

Please be sure to give this instruction to end user.

4~7

16~18

This product is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the product by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the product.

Make sure to shut off the power before cleaning the product.

In order to prevent the damage to using personnel and other personnel and avoid the loss of property, please be

sure to comply with following cautions.

The following marks are used to distinguish the damage from damage degree caused by ignoring the mark or

operating by wrong methods.

The following symbols are used to describe the type of instruction to be observed.

Describe a potential hazard could cause the death or serious injury.

Describe a hazard could cause injury and property loss.

These symbols represent the prohibited item we should not perform.

These symbols represent the compulsory item we should follow with.

These symbols represent the item you should pay attention to.

SAFETY PRECAUTIONS <must be complied>

INSTALLATION CAUTIONS

Don’t use the power besides the alternate

current 220V/50Hz.

Improper practice of installation could cause

an electric shocks or a fire.

Carry out the installation accurately in line

with this instruction.

Fault or electric leakage cause the electric shock.

Ground connection.

The external air intake opening should be

positioned away from the exhaust

openings of combustion gases etc. The

intake of such gases could cause a lack

of oxygen in the room. The external air

intake opening should not be positioned

where discharged air may directly enter

it. A situation like this lead to the room

beiy contaminated and this may pose a

healthy risk.

Please conduct the ground connection in the following

methods.

If employing other methods, it may cause the

insufficient ground connection. Don’t connect the

ground connection with gas pipeline, water pipeline,

lightening rod and phone landline. Wrong ground

connection may cause electric shock.

When you want to pierce the metal duct

through the metal lathe or the wire lath or

the metal plate of the wooden facility, do

not forget to insulate electrically between

the duct and the wall.

Otherwise, it would cause an electrical

shock or electric leakage.

It may cause the fire and electric shock.

It may cause the injury.

Carry out electrical work in accordance

with the laws and regulations prevailing in

the country concerned, technical standard

and explanation for work, and make

absolutely sure that an exclusive circuit

breaker is used. Any insufficient capacity

of power circuit and improper work can

result in shock and fire hazard.

Choose the installation place where is

endurable in quality as well as in weight,

then install the unit accurately with

adequate strength and completeness of

installation in accordance with operation

instruction. Otherwise, it is likely to cause

an electric shock, a fire, a drop of unit,

thus causing the injury on the human body.

Dropping may

cause the injury.

Please don’t insert the fingers and sticks

into the rotation part during the operation.

Please install the main unit in location

where dust and dirt can’t come in.

Large amount of dirt and dust clogged in

filter will cause the lack of oxygen in room.

Heat-insulate the outdoor duct (including

the indoor side, if necessary) to prevent

dewing. If heat insulation is not adequate,

water likely goes indoor and wets the

household properties.

Owing to the different installation position

for special purpose circuit breaker,

sometimes it’s required to install the

anti-creeping circuit breaker.

It may cause the electric leakage if not

installing the anti-creeping circuit breaker.

Please wear the gloves and other

protective tools to avoid the injury.

It must use the specified part during the

installation (include the accessories).

It may cause the unit dropping, fire and

electric shock if not using the specified parts.

Please install the anti-bird net or similar

thing in air duct.

Please remove the abnormities such as bird

net, otherwise it may cause the lack of

oxygen in room.

Install the outdoor duct in a falling gradient

towards the outside so as to prevent water

from coming in.

Otherwise, the building is likely to be

flooded, wetting the household effects.

(1) excessive bending (2) multi-times bending (3) reduction the diameter of connecting duct

Please avoid the following duct installation.

It may cause the unexpected accident.

Please don’t install the unit in location

where indoor temperature is below the

outdoor temperature.

It may cause the electric shock or

abnormal operation.

Provide an exclusive circuit breaker that

can completely contacts on all the poles

by more than 3mm through direct

connections to the power terminals.

Depending upon the environment for

installation, it becomes necessary to install

an earth leakage breaker.

Don’t install in location where may be

exposed to the combustible gas leakage.

In case of gas get together around the unit,

it may cause the fire.

Connect the power cord and the lead wire

with accuracy using the specified wires

and fix them firmly so as not to put the

outer stress of wires on the pin connecting

area. Incomplete connection or fixing is

likely to cause a heat generation or fire.

Please don’t face it to the air outlet

(especially when operating).

The dirt may fly into your eyes.

Don’t twist the unit or

conduct the overload

force to unit in construction.

Dropping may cause the injury.

Install the power cord and the lead wire

with accuracy so the power source cover

may not float. If the installation curves

inappropriately, the pin connection area is

likely to cause a heat generation, a fire and

an electric shock due to dust or powder.

Please take care of it during moving the

unit.

Improper hanging and moving may cause

the dropping, result in injury.

Although the power is shut off, it may get

involved to the rotation part, result in injury.

Please pay attention to the rotation of

impeller caused by backward air in air duct.

Please firmly install the product and

components.

Otherwise, it may cause the injury brought

by falling-off.

Locations with large amounts of cooking fumes.

The unit doesn’t work if the filter or heat exchange core

become clogged with oil which may cause fire.

Locations exposed to high temperature or direct

flame.

Locations with high humidity.

Avoid installing the ERV in locations which reach

temperature of 40 or above. Usage under high

temperature conditions may cause distortion of filter

or heat exchange core or motor burn-out.

Don’t install it in the following locations.

Make sure that inspection opening is provided so that filter and heat exchange element maintenance and

periodic spot checks of unit can be easily carried out.

Don’t install the unit in locations such as machinery or

chemical plants where it will be exposed to noxious

gases containing acids, alkali, organic solvents, paint

fumes, etc., to gases containing corrosive ingredients,

or where dust or oil mist will be produced.

(Gas poison, corrosion and degradation accrued in

unit may cause the fire.)

Do not install in high humidity locations such as bathrooms.

Dew occurred in unit may cause electric shock, short circuit,

other electric accident and produce the dewing water drops.

OPERATING REQUIREMENTS

Outdoor air condition

Temperature range -10 ~40 relative humidity 85% or less.

Indoor air condition

Temperature range -10 ~40 relative humidity 85% or less.

Installation requirements: same as the indoor air conditions.

The product is forbidden to use in locations where ambient temperature may sharply vary, even if it falls

into range of specified usage temperature.

The product should be installed 2.3m above from the ground to avoid any accident.

Energy Recovery Ventilator is an appliance which will suck the fresh outdoor air into room, the refore, in case

insects exists in ambient environment, that may bring the insects into the product from pipe hood.

The insects exists subject to the ambient environment, it's recommended to use the pipe hood with fly net when

using the product in locations where it's easy to attract the insects like near to exhaust air charging opening

near to street light.

As shown in the right figure, it’s supposed that a high temperature absorbing air condition A and a low

temperature absorbing air condition B are plotted on the line figure, then a high temperature air A is

heat-exchange by the unit and Point C represent the trend of saturation curve. In this case, it will cause the

dew or frost inside the unit. To avoid this, you are required to heat a low temperature

air B up to B’ so as to get C’ below the saturation curve before using the unit.

Avoid the entering of insects

FEATURES

1. Energy-saving You can save the electric bill for air conditioner as a result of recovering the loss of

energy caused by ventilation.

2. Facility saving As part of energy can be recovered through greatly reduction of fresh air load, the

similar air conditioning equipment can be properly miniaturization.

3. Humidity function When it's heat in room,reduce the humidity of outdoor fresh air to make it close to that

of indoor.

When it's cool in room, increase the humidity of outdoor fresh air to make it close to that

of indoor.

4. Comfortable ventilation The indoor temperature varies little during ventilation, it also can be used for ventilation

in high enclosed room due to the simultaneously operation of air supplying and

discharging.

5. Isolation effect There's isolation effect in air path and heat exchange core,which will prevent the

outdoor noise from spreading to indoor or prevent the indoor sound from spreading to

outdoor to keep a good environment for office or shop.

OPTIONAL ACCESSORIES

FY-E15PM1

FY-E15PM1L

FY-E25PM1

FY-E25PM1L

FY-E35PM1

FY-E35PM1L

Model

Filter

Please contact the dealer to purchase.

FY-FPE15M1

FY-FPE25M1

FY-FPE35M1

PART NAME AND DIMENSIONS

Part Name

outdoor filter

indoor filter

model label

switch box

bottom inspection cover

side inspection cover

heat exchange core

FY-E**PM1(right type)

FY-E**PM1( )

model label

switch box

side inspection cover

outdoor filter

bottom inspection cover

indoor filter

heat exchange core

bottom inspection cover

FY-E**PM1L(left type)

FY-E**PM1L( )

Model Quantity

Other model

FY-E35PM1 FY-E35PM1L

1 The amount of indoor filter is different owing

to model difference.

2 Left type is symmetric to right type in structure.

outdoor filter

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Admirador de Panasonic

Panasonic

Panasonic WhisperGreen FV-08VKML3 Manual de usuario

Panasonic

Panasonic FV-08-11VFM5 Manual de usuario

Panasonic

Panasonic F-M15AC Manual de usuario

Panasonic

Panasonic F-M14E8 Manual de usuario

Panasonic

Panasonic FV-0511VQCL1 Manual de usuario

Panasonic

Panasonic FV-07VB1 Manual de usuario

Panasonic

Panasonic FV-11VHL2 Manual de usuario

Panasonic

Panasonic FV-05VQ3 Manual de usuario

Panasonic

Panasonic WhisperWelcome FV-05VFM2 Manual de usuario

Panasonic

Panasonic FV-08VRL1 Manual de usuario

Panasonic

Panasonic FV-20CUT1 Manual de usuario

Panasonic

Panasonic WhisperSense FV-08VQC5 Manual de usuario

Panasonic

Panasonic F-56MPG Manual de usuario

Panasonic

Panasonic fv-30bg2h Manual de usuario

Panasonic

Panasonic RG-N110LHA Manual de usuario

Panasonic

Panasonic PAW-FC Manual

Panasonic

Panasonic Whisper Green FV-05VK1 Manual de usuario

Panasonic

Panasonic Whisper-Lite FV-15VQL4 Manual de usuario

Panasonic

Panasonic FV-NLF46RES Manual de usuario

Panasonic

Panasonic FV-0510VS1 Manual de usuario

Panasonic

Panasonic WhisperCeiling FV-20VQ3 Manual de usuario

Panasonic

Panasonic FV-08-11VFL5E Manual de usuario

Panasonic

Panasonic FV-11VH2 Manual de usuario

Panasonic

Panasonic FV-11VH1 Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje

Litex Industries

Litex Industries E-CGL52CB5C1 Manual de usuario

Lindab

Lindab LTDF Manual de usuario