Panasonic DP-C406 Manual de usuario

Operating Instructions

Before operating this machine, please carefully read this manual

and keep this documentation in a safe place for future reference.

(Illustration shows optional accessories that may not be installed on your machine.) English

Digital Colour Imaging Systems

(For Copier)

Model No. DP-C406 / C306 / C266

Operating Instructions

The following Operating Instruction manuals are included with this machine. Please refer to the appropriate manual

and keep all manuals for future reference. If you lose the manual, contact the authorised Panasonic dealer.

Accessories

Quick Reference Guide

Describes the basic procedures for each function, and

introduces various settings for Copy function.

Operating Instructions (For Basic)

Describes the overview of this machine.

For a detailed explanation of functions, please refer to

the Operating Instruction manuals included on two CD-

ROMs as illustrated below.

Operating Instructions CD

Contains manuals with detailed information for

Administrator Setup, User Setup, Copy, Facsimile/

Internet Fax, Scan/Email, Print functions, Function

Parameters, User Authentication, and Maintenance.

Document Management System CD

Contains the Panasonic Document Management

System Application software, and manuals for the

Panasonic Document Management System Application

software.

Operating Instructions CD

Setup Guide For Administrator

Describes how to set up the machine.

Setup Guide For User

Describes how to install the printer driver

and application software to client PC.

Copy Function

Describes how to make a Colour Copy

with creative features.

Facsimile and Internet Fax

Function

(The Facsimile function is available when

the optional G3 Fax Communication

Board is installed.)

Describes how to send/receive a

Facsimile/Internet Fax, and describes the

course of action to take when a trouble

message appears, etc.

Scan and Email Function

Describes how to scan and how to send

Email through the machine.

Print Function

Describes how to print using the Control

Panel of the machine.

Function Parameters

Describes how to change the default

settings of each function using the Control

Panel of the machine.

User Authentication

Describes how to enable and use the

User Authentication function.

Maintenance Guide

Describes how to maintain the machine,

and the course of action to take when a

problem message appears.

Document Management System CD

Application Software

Describes how to use the application

software.

Ex: Printer Driver, Fax Driver, Quick

Image Navigator, Device Monitor/

Device Explorer, Network

Configuration and Address Book

Editor

Conventions

Icons

The following icons are used in this manual.

Notation

The following notations are used in this manual.

Icon Description

Indicates important information that must be read in detail.

Indicates reference information.

Notation Description

For Keys and Buttons Hard buttons on the Control Panel are depicted as **** key, and soft buttons on the Touch

Panel Display are depicted as “xxx”.

Ex:

Press the Start key and select “More Menus”.

Table of Contents

Chapter 1 Basic Menu Features

Placing Originals.................................................................................................................. 6

How to Place Originals.................................................................................................... 6

Basic Operation Procedure ................................................................................................. 9

Copying with Preset Ratios (Reduction/Enlargement) ........................................................ 11

Selecting the Colour Mode .................................................................................................. 12

Black Mode ......................................................................................................... “Black”14

Full Colour Mode........................................................................................ “Full Colour”14

2 Colour Mode................................................................................................ “2 Colour”15

1 Colour Mode................................................................................................ “1 Colour”17

New Colour Registration ..........................................................................“Add Custom”19

Selecting Original Type and Adjusting the Density........................................ “Quality Adj.”21

Registering Quality Preset.........................................................................................“Save”23

Using Quality Preset............................................................................................... “Recall”25

Quality Adjusting........................................................................................ “More Settings”26

Background Removal............................................................... “Background Removal”28

Bleed-Through Prevention ...............................................“Bleed-Through Prevention”29

Tint ..........................................................................................................................“Tint”30

Contrast.......................................................................................................... “Contrast”31

Sharpness ...................................................................................................“Sharpness”32

Saturation.................................................................................................... “Saturation”33

Colour Balance....................................................................................“Colour Balance”34

Proof Copying.................................................................................................... “Proof Set”35

Confirming/Editing the Selected Copy Features................................... “Confirm Settings”36

Storing a Job in Memory................................................................................“Preset Jobs”37

Recalling a Preset Job Stored in Memory ........................................................................... 39

Checking the Waiting to Copy Job ............................................................ “Output Queue”40

Displaying a List of All Jobs ............................................................................................ 40

Displaying a List of Copy Jobs ........................................................................................ 40

Deleting Copy Jobs ......................................................................................................... 41

Completion Notice ............................................................................. “Completion Notice”42

Chapter 2 More Menus Features

2-Sided Copy Mode................................................................. “2-Sided / Original->Copy”43

Basic Operation for the 2-Sided Copy Mode................................................................... 43

Copying 1-Sided Originals onto 2-Sided Sheets..................................................“1 -> 2”44

Copying 2-Sided Original(s) onto Two Separate Sheets .....................................“2 -> 1”45

Copying 2-Sided Original onto 2-Sided Sheet......................................................“2 -> 2”46

Copying Facing Page Original onto Two Separate Sheets ............................... “2 Page”47

Copying Facing Page Original onto a 2-Sided Sheet....................................“Book -> 2”48

Copying Multiple Pages onto a Single Sheet (N in 1 Copy) ................................ “N in 1”50

Copying Originals with Saddle-Stitch Binding (Booklet) ...................................“Booklet”53

Copying Mixed Size Originals from the ADF .......................................“Multi-Size Feed”56

Copying Special Originals (Thin Paper, etc.) from the ADF ....... “Job Build and SADF”59

Sort Mode ..................................................................................................... “Sort / Finish”61

Zoom Mode............................................................................................... “Zoom / Effects”64

Variable Ratios .................................................................................................... “Zoom”64

Auto Zoom..................................................................................................“Auto Zoom”66

Effect Modes............................................................................................. “Zoom / Effects”68

Setting a Blank Edge............................................................................................ “Edge”68

Eliminating Dark Inner Binding Shadows .............................................................“Book”70

Shifting Image to Right, Left, Up, or Down ........................................................ “Margin”71

Copying Mirror Image......................................................................................... “Mirror”73

Copying with Stamping..................................................................................“Stamping”74

Centering...................................................................................................... “Centering”83

Image Repeat........................................................................................ “Image Repeat”85

Copying Inverse Image..................................................................................... “Inverse”87

Insertion Modes ................................................................................... “Insertion/Overlay”88

Adding a Cover Page to Copies ..........................................................................“Cover”88

Inserting Blank/Copied Pages Between Copies ................................... “Page Insertion”90

Inserting Blank Pages Between Transparency Films....... “Transparency Interleaving”92

Overlay Modes..................................................................................... “Insertion/Overlay”94

Overlaying an Image onto the Copies ..............................................................“Overlay”94

Overlay Copying with Registered Image ................................................“From Overlay”97

File Edit.............................................................................................................“Fill Edit”99

Double Exposure............................................................................. “Double Exposure” 102

Chapter 3 Other Features

Making Copies with the ADF Opened.................................................................................. 104

Digital Skyshot Mode....................................................................................................... 104

Manual Skyshot Mode..................................................................................................... 105

Reserving the Next Copy Job while the Current Copy Job is Progressing.

“

Reverse a Job

”

106

Interrupting the Current Copy Jobs to Make an Urgent Copy.............................................. 107

Chapter 4 Appendix

Combined Copy Functions .................................................................................................. 108

Index .................................................................................................................................... 111

Chapter 1 Basic Menu Features

1Basic Menu Features

Placing Originals

How to Place Originals

On the ADF

Acceptable Paper Type

Notice for ADF

Do not use the following type / flawed originals.

• Drawing papers, Transparencies, Labeling paper, Heavy weight papers, Thin Art papers, Film,

Thermal papers.

• Papers which are curled, ripped, creased, folded, punched, glued, stapled, or self-adhesive.

• Pressure sensitive or carbon backed papers.

• Paper which is still wet with colour ink or white-out.

Original Size: A3, B4, A4, A4-R, A5, A5-R, FLS1, FLS2

Paper Weight: 1 sided : 50-105 g/m2

2 sided : 64-105 g/m2

Face up. Up to 100 sheets

(80 g/m2/ A4)

Originals can be set up to the

Upper Limit Indicator.

Original Guides

Adjust the Original

Guides to the original’s

width.

Upper Guide Upper Limit Indicator

Chapter 1 Basic Menu Features

On the Platen Glass

Ex: Book Original (“Book -> 2” mode)

When copying A4 sized book

Ex: Sheet Original

Face down.

Align the centre of the book with the

“A4” indication.

Face down.

Align with top left corner.

Chapter 1 Basic Menu Features

Notice for Platen Glass

Align the original to the top left corner mark ( ).

• If the original is not positioned properly, a portion of the

original may not be copied.

• For originals smaller than A5 size, position the original

within the A5 area and select A5.

Original Orientation

Ex: A5

For Book -> 2 Copy

Ex: When copying A5 sized book, align the centre of the

book with the “A5” indication.

Copying a thick booklet

• If there are less than 5 mm of white margin on originals, the edge of the copied paper may get blurred

in white. To avoid the problem, change the setting of “Digital Skyshot Mode” to “No”. For setting of

“Digital Skyshot Mode”, refer to Copier Settings in the Operating Instructions (For Function

Parameters) of provided CD-ROM.

• After copying a thick booklet, open the ADF and verify that the ADF Hinge was returned to original

position in order to prevent the rear of the ADF from being raised.

• When copying with the ADF open, do not look directly at the exposure lamp.

Direct eye exposure can cause eye fatigue or eye injury.

• When copying a thick original, do not use excessive force to press it against the Platen Glass.

The Glass may break and cause injuries.

For Portrait Orientation

Original Guides

For Landscape Orientation

Original Guides

A4A5R

A4R

A5 A5R

CAUTION

Chapter 1 Basic Menu Features

Basic Operation Procedure

The machine automatically detects original(s) and decides on the Copy Size and Colour mode to use.

If the detection fails, manually set the settings.

Place original(s).

zRefer to Placing Originals (See page 6).

Press the Copy key if the machine is

set to other function mode.

Select the required settings if

necessary.

zThe original size is detected and a

corresponding Copy Size is automatically

selected.

zWhen the desired size of paper is not set in

the Paper Trays, use the Sheet Bypass. For

using the Sheet Bypass, refer to Adding

Paper <Printing Media> in the Operating

Instructions (For Maintenance) of provided

CD-ROM.

zThe original’s colour is detected and the

corresponding colour mode is selected

automatically.

zIf the orientation of original does not match

the orientation of copy paper, the image of

original is rotated automatically and copied.

zWhen copying A4 size originals, selecting

A4 for the Copy Size accelerates the

continuous copying speed. If the orientation

is not the same for both settings, the copied

image is automatically rotated by 90

degrees.

zFor more details of the Basic Menu screen,

refer to Basic Menu Feature (See pages 6

to 42).

zWhen setting other features, refer to More

Menus Features (See pages 43 to 101).

Ex: 2-Sided Copy, Sort / Finish, Zoom /

Effects, etc.

Face up.

Up to 100 sheets (80 g/m2/ A4)

Face down. Align with the top left corner.

Close ADF.

Chapter 1 Basic Menu Features

Enter the desired number of copies.

(Up to 999)

zWhen inputting a number (4 to 8 digits) with

the optional Fax Communication Board

installed, the machine automatically

interprets it as a telephone number,

switches to the Fax mode, and displays the

Number Pad screen.

zThe number of digits interpreted as a fax

number can be set from 4 to 8 digits in the

Function Parameter “118 Fax Function

Detect” (Fax/Email Settings > Fax

Parameters). For more details, refer to Fax/

Email Settings in the Operating Instructions

(For Function Parameters) of provided CD-

ROM.

Press the Start key.

zTo stop the job while making copies, select

“Stop” on the above screen. To cancel the

job, select “Yes”.

zWhile and after making copies, the fan

motor may spin to cool down the machine.

zWhen copying from the Platen Glass, place

the next original and follow the instructions

described on the touch panel display.

zDepending on the More Menus settings, the

following screen may appear.

zAfter finishing copying, press the Reset key to

return to the initial screen of the current active

mode.

Otros manuales para DP-C406

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Panasonic

Panasonic

Panasonic Workio DP-C262 Manual de usuario

Panasonic

Panasonic KX-FLB751 Guía de configuración rápida

Panasonic

Panasonic WORKIO DP-8060 Manual de usuario

Panasonic

Panasonic DP-MB310 Manual de usuario

Panasonic

Panasonic KX-MB2000 Manual de usuario

Panasonic

Panasonic DP-2330 Manual de usuario

Panasonic

Panasonic DP-190 Manual de usuario

Panasonic

Panasonic KX-MB261E Manual de usuario

Panasonic

Panasonic KX-MC6020HX KX-FAP317E Manual de usuario

Panasonic

Panasonic Workio DP-C401 Manual de usuario

Panasonic

Panasonic DP-8020E Manual de usuario

Panasonic

Panasonic DP-3530 Manual de usuario

Panasonic

Panasonic KX-MC6260E Manual de usuario

Panasonic

Panasonic KXMB2000E Manual de funcionamiento

Panasonic

Panasonic DP-2330 Manual de usuario

Panasonic

Panasonic DP-190 Manual de usuario

Panasonic

Panasonic Panafax UF-7000 Manual de instrucciones

Panasonic

Panasonic Workio DP-8016P Manual de usuario

Panasonic

Panasonic DP-6030 Manual de usuario

Panasonic

Panasonic DP-1510P Manual de usuario

Panasonic

Panasonic DP-MB251CX Manual de usuario

Panasonic

Panasonic DP-C266 Manual de usuario

Panasonic

Panasonic KX-FLB882CX Manual de usuario

Panasonic

Panasonic KX-MB2061E Manual de funcionamiento

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario