Panasonic KX-HNS104 Manual de usuario

Installation Guide

Home Network System

Glass Break Sensor

Model No. KX-HNS104

Thank you for purchasing a Panasonic product.

This document explains how to install the glass break sensor properly.

For details about how to use the system, refer to the User’s Guide

(page 14).

Please read this document before using the unit and save it for future

reference.

For assistance, please contact us at 1-800-272-7033 or visit our Web

site: www.panasonic.com/support for customers in the U.S.A. or

Puerto Rico.

Please register your product: www.panasonic.com/prodreg

Printed in China

HNS104_(en_en)_1120_ver.010.pdf 1 2014/11/19 19:59:09

Introduction

Accessory information ...............3

Important Information

About this system ......................4

For your safety ...........................4

Important safety instructions ......5

For best performance ................5

Other information .......................6

Setup

Part names and functions ..........8

About the LED indicator .............8

Setup overview ..........................8

Inserting the batteries ................9

Registering the sensor ...............9

Information about sensor

features ....................................10

Confirming the usage area ......11

Wall mounting ..........................12

Appendix

Testing the glass break

sensor ......................................14

Adjusting the sensor

sensitivity .................................14

Features available when using the

[Home Network] app ................14

Accessing the User’s Guide ....14

Specifications ..........................15

FCC and other information ......16

Customer services ...................17

Warranty (For United States and

Puerto Rico) .............................18

Table of Contents

HNS104_(en_en)_1120_ver.010.pdf 2 2014/11/19 19:59:09

Accessory information

Supplied accessories

No. Accessory item/Part number Quantity

ABatteries*12

BWall mounting adaptor*2/PNKK1111Z1 1

CWall mounting screws (25 mm (1 inch))/XTB4+25AVW 2

*1 When replacing batteries, see “Power source” of “Specifications”, page 15

for battery information.

*2 The sensor can be wall mounted with or without the wall mounting adaptor

(page 12).

AB C

Other information

RDesign and specifications are subject to change without notice.

RThe illustrations in these instructions may vary slightly from the actual product.

Trademarks

RiPhone and iPad are registered trademarks of Apple Inc.

RAndroid is a trademark of Google Inc.

For assistance, please visit www.panasonic.com/support 3

Introduction

HNS104_(en_en)_1120_ver.010.pdf 3 2014/11/19 19:59:09

About this system

This system is an auxiliary system; it is

not designed to provide complete

protection from property loss.

Panasonic will not be held responsible

in the event that property loss occurs

while this system is in operation.

For your safety

To prevent severe injury and loss of life/

property, read this section carefully

before using the product to ensure

proper and safe operation of your

product.

WARNING

Power connection

RUse only the power source marked

on the product.

RDo not connect non-specified

devices.

Installation

RTo prevent the risk of fire or

electrical shock, do not expose the

product to rain or any type of

moisture.

RDo not place or use this product

near automatically controlled

devices such as automatic doors

and fire alarms. Radio waves

emitted from this product may cause

such devices to malfunction

resulting in an accident.

RKeep small parts (screws, etc.) out

of the reach of children. There is a

risk of swallowing. In the event they

are swallowed, seek medical advice

immediately.

Operating safeguards

RDo not disassemble the product.

Medical

RConsult the manufacturer of any

personal medical devices, such as

pacemakers or hearing aids, to

determine if they are adequately

shielded from external RF (radio

frequency) energy. DECT features

operate between 1.92 GHz and

1.93 GHz with a peak transmission

power of 115 mW.

RDo not use the product in health

care facilities if any regulations

posted in the area instruct you not to

do so. Hospitals or health care

facilities may be using equipment

that could be sensitive to external

RF energy.

CAUTION

Battery

RThe batteries should be used

correctly, otherwise the product may

be damaged due to battery leakage.

RDo not charge, short-circuit,

disassemble, or heat the batteries.

RDo not dispose of batteries in a fire.

RRemove all the batteries when

replacing.

RDo not mix old, new or different

types of batteries.

RIt is recommended that batteries are

replaced annually.

RKeep out of the reach of small

children. There is a risk of

swallowing. If the battery is

4For assistance, please visit www.panasonic.com/support

Important Information

HNS104_(en_en)_1120_ver.010.pdf 4 2014/11/19 19:59:09

swallowed, seek medical attention

immediately.

RRemove the battery if it becomes

unusable. There is a risk of leakage,

overheating, and rupture. Do not

attempt to use a battery if it is

leaking.

RDo not intentionally pour water on

the battery or allow it to get wet.

There is a risk of fire and smoke. If

the battery becomes wet, remove it

immediately and contact an

authorized service center.

Important safety

instructions

When using your product, basic safety

precautions should always be followed

to reduce the risk of fire, electric shock,

and injury to persons, including the

following:

1. Do not use this product near water

for example, near a bathtub,

washbowl, kitchen sink, or laundry

tub, in a wet basement or near a

swimming pool.

2. Use only the batteries indicated in

this document. Do not dispose of

batteries in a fire. They may

explode. Check with local codes for

possible special disposal

instructions.

SAVE THESE INSTRUCTIONS

For best performance

Hub location/avoiding noise

The hub and other compatible

Panasonic devices use radio waves to

communicate with each other.

RFor maximum coverage and

noise-free communications, place

your hub:

– at a convenient, high, and central

location with no obstructions

between the product and hub in

an indoor environment.

– away from electronic appliances

such as TVs, radios, personal

computers, wireless devices, or

other phones.

– facing away from radio frequency

transmitters, such as external

antennas of mobile phone cell

stations. (Avoid putting the hub

on a bay window or near a

window.)

RIf the reception for a hub location is

not satisfactory, move the hub to

another location for better reception.

Environment

RKeep the product away from

electrical noise generating devices,

such as fluorescent lamps and

motors.

RThe product should be kept free

from excessive smoke, dust, high

temperature, and vibration.

RThe product should not be exposed

to direct sunlight.

RDo not place heavy objects on top of

the product.

RThe product should be kept away

from heat sources such as heaters,

kitchen stoves, etc. It should not be

placed in rooms where the

For assistance, please visit www.panasonic.com/support 5

Important Information

HNS104_(en_en)_1120_ver.010.pdf 5 2014/11/19 19:59:09

temperature is less than 0 °C (32 °F)

or greater than 40 °C (104 °F).

Damp basements should also be

avoided.

ROperating the product near electrical

appliances may cause interference.

Move away from the electrical

appliances.

RThe sensor may make false

detections in noisy locations, such

as where there is noise from metallic

blinds opening and closing, or

metallic bells of alarm clocks. Avoid

installing the sensor in these

locations.

RThe sounds of doors opening and

closing may cause false detections.

Do not install the sensor near doors.

RDo not place screens or shielding

(such as sound blocking curtains)

between the glass and sensor. This

may prevent the sensor from being

able to detect the sound of glass

breaking.

Other information

CAUTION: Risk of explosion if battery

is replaced by an incorrect type.

Dispose of used batteries according to

the instructions.

Routine care

RWipe the outer surface of the

product with a soft moist cloth.

RDo not use benzine, thinner, or any

abrasive powder.

Information on Disposal in other

Countries outside the European

Union

123

These symbols (A, B, C) are only

valid in the European Union. If you

wish to discard these items, please

contact your local authorities or dealer

and ask for the correct method of

disposal.

Note for the battery removal

procedure

Refer to “Inserting the batteries” on

page 9.

6For assistance, please visit www.panasonic.com/support

Important Information

HNS104_(en_en)_1120_ver.010.pdf 6 2014/11/19 19:59:09

Notice

For assistance, please visit www.panasonic.com/support 7

Important Information

HNS104_(en_en)_1120_ver.010.pdf 7 2014/11/19 19:59:09

Part names and

functions

ABCD

Microphone

LED indicator

MHIGHN/MLOWN

Used to change the sensor

sensitivity (page 14).

Rear cover

M N

Used to confirm the status of the

sensor or register the sensor to

the hub.

About the LED

indicator

You can press MN and check the

LED indicator to confirm the sensor’s

status.

Indicator Status

Green, lit No glass break

detected

Red, lit Glass break was

detected

Red,

blinking

Sensor is out of range

of the hub

Green,

blinking

Registration mode

(You pressed and held

MN)

Off No battery power

Note:

RThe LED indicator does not indicate

sensor status if the sensor has not

been registered (page 9).

Setup overview

1Initial setup

Make sure you can access the

system using your mobile device.

For details, refer to the System

Setup Guide included with your

hub.

2Insert the batteries

The sensor is battery powered.

3Registration

Required only if the sensor was

purchased separately (i.e., not as

part of a bundle).

4Confirm the installation area

Read the information in this

document to confirm that the

desired installation area is suitable

to proper operation.

5Installation

Install the sensor in the desired

location.

8For assistance, please visit www.panasonic.com/support

Setup

HNS104_(en_en)_1120_ver.010.pdf 8 2014/11/19 19:59:09

Inserting the

batteries

RUSE ONLY Alkaline batteries AA

(LR6) size.

RDo NOT use Manganese/Ni-Cd/

Ni-MH batteries.

RConfirm the polarities ( , ).

1Remove the rear cover by

pressing the upper sides of the

cover (A) and sliding it down (B).

2Insert the batteries.

3Install the rear cover.

RPlace it with the “ ” mark

facing upwards and slide it.

Registering the

sensor

This procedure is not required for

devices that were included as part of

a bundle.

Before you can use the sensor, it must

be registered to the hub.

If you purchased devices separately

(i.e., not as part of a bundle), you must

You can register each device by using

the registration buttons or the [Home

Network] app.

For assistance, please visit www.panasonic.com/support 9

Setup

HNS104_(en_en)_1120_ver.010.pdf 9 2014/11/19 19:59:09

Using registration buttons

1Hub:

Press and hold M OTHER

DEVICEN until the LED indicator

blinks in green.

2Sensor:

Press and hold MN until the

LED indicator blinks in green

(page 8).

RWhen registration is complete,

the hub sounds one long beep.

Note:

RTo cancel the registration, press

MN on the hub and on the sensor.

RIf registration fails, the hub sounds

several short beeps.

Using the app

When you register the sensor by using

the [Home Network] app, you can

assign a name to your devices and

group them by location. For more

information, refer to the User’s Guide

(page 14).

Information about

sensor features

Please read the following information

before deciding where to install the

sensor.

Note:

RThe sensor’s features are not

designed to be used in situations

that require high reliability. We do

not recommend use of the sensor’s

features in these situations.

RPanasonic takes no responsibility for

any injury or damage caused by the

use of the sensor.

Glass break sound detection

The sensor uses a microphone to

detect the unique sound frequencies

that are produced when glass breaks.

Sensor detection range (when set to

MHIGHN):

: approx. 5 m (16.4 feet)

Note:

RThe sensor may make false

detections when there is noise from

metallic blinds opening and closing,

metallic bells of alarm clocks, etc.

Applicable glass specifications

Type Thickness

xxxx Minimum: xx mm

(xx inches)

Maximum: xx mm

(xx inches)

xxxx Minimum: xx mm

(xx inches)

Maximum: xx mm

(xx inches)

10 For assistance, please visit www.panasonic.com/support

Setup

HNS104_(en_en)_1120_ver.010.pdf 10 2014/11/19 19:59:09

Otros manuales para KX-HNS104

Tabla de contenidos

Otros manuales de Accesorios de Panasonic

Panasonic

Panasonic KX-TGP600 Manual de usuario

Panasonic

Panasonic MA3X199 (MA199) Manual de usuario

Panasonic

Panasonic WV-TW310S Manual de usuario

Panasonic

Panasonic MA24D52 Manual de usuario

Panasonic

Panasonic WV-PB5564 Manual de usuario

Panasonic

Panasonic AG-BS300P Manual de usuario

Panasonic

Panasonic MA3X786 (MA786) Manual de usuario

Panasonic

Panasonic MA26111 Manual de usuario

Panasonic

Panasonic KX-HNS107 Manual de usuario

Panasonic

Panasonic MA3X788 (MA788) Manual de usuario

Panasonic

Panasonic KX-HNS104C Manual de usuario

Panasonic

Panasonic MA6Z718 Manual de usuario

Panasonic

Panasonic KX-TDA0155CE Manual de usuario

Panasonic

Panasonic WX-LA20 Manual de usuario

Panasonic

Panasonic S-Link SL-PCAT Manual de usuario

Panasonic

Panasonic EX-FC1 Manual de usuario

Panasonic

Panasonic Infrared Light Emitting Diodes LN77L Manual de usuario

Panasonic

Panasonic GP-X SERIES Manual de usuario

Panasonic

Panasonic HL-C211BE Manual de usuario

Panasonic

Panasonic Grid-EYE AMG88 Series Manual de usuario

Panasonic

Panasonic Light Emitting Diodes LN49YPX Manual de usuario

Panasonic

Panasonic MA2J112 (MA112) Manual de usuario

Panasonic

Panasonic MA2YD17 Manual de usuario

Panasonic

Panasonic MA24D50 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manual de usuario