Panasonic HL-C2 Series Manual de usuario

Preface

Thank you for purchasing Ultra High-Speed, High-Accuracy Laser Displacement

Sensor “HL-C2 Series”.

To fully use this product safely and properly, please read this manual carefully.

See our Website (https://panasonic.net/id/pidsx/global) for the latest information

about the product and latest user’s manual.

■Note

Please notice that illustrations in this manual might be little different from the actual

product.

2. Contents of this manual will be changed without notice due to improvements.

3. This manual and software must not be partially or totally copied or reprinted.

4. If there are any questions, mistakes, paging disorder, or missing pages in this

manual, please contact our sales office nearest you.

5. Windows, VisualBasic, and VisualC++ are registered trademarks of Microsoft

Corporation in the United States of America and other countries.

6. All other company names and product names in this manual are trademarks or

registered trademarks of their respective companies.

7. We have no responsibility of any results of operations regardless of the above.

Preface

Whole USER’S MANUAL Construction

The HL-C2 Series is prepared for the following user’s manuals.

Read them as necessary.

HL-C2 Series USER’S MANUAL (PDF)

This manual describes cautions for using HL-C2 Series, and

installation method, operation method, function details,

specifications, maintenance and inspection method of

system components (controller, sensor head).

HL-C2 Series USER’S MANUAL: RS-232C Communication Control (PDF)

The manual describes various commands for controlling the

system by PLC or PC using RS-232C communication.

Please read this manual before an evaluation test for system

configuration or programming. Please read “HL-C2

Series USER’S MANUAL”for functional details of the

system.

HL-C2 Series USER’S MANUAL: USB Communication Control (PDF)

The manual describes API for controlling the system by PLC

or PC using USB communication.

Please read this manual before an evaluation test for system

configuration or programming. Please read “HL-C2

Series USER’S MANUAL”for functional details of the

system.

Ultra High-Speed, High-Accuracy

Laser Displacement Sensor

HL-C2 Series

User's Manual

ME-HLC2-09

2013.6

panasonic.net/id/pidsx/global

ME-HLCSRS-09

2013.6

panasonic.net/id/pidsx/global

Ultra High-Speed, High-Accuracy

Laser Displacement Sensor

HL-C2 Series

User's Manual

RS-232C Communication Control

Ultra High-Speed, High-Accuracy

Laser Displacement Sensor

HL-C2 Series

User's Manual

ME-HLCSUSB-08

2013.6

panasonic.net/id/pidsx/global

USB Communication Control

Preface

HL-C2 Series USER’S MANUAL: Ethernet Communication Control

(PDF)

This manual explains various settings to acquire

measurement information of the HL-C2 system by PLC

using Ethernet communication.

For detailed explanation concerning the system’s functions,

precautions for use, etc., refer to the separate “HL-C2

Series USER’S MANUAL”.

■USER’S MANUAL for Intelligent Monitor AiM

The Intelligent Monitor AiM, which contains various useful functions in

addition to the compact programmable display, is available when developing

PC-based system.

HL-C2 Series USER’S MANUAL: Intelligent Monitor AiM (PDF)

This manual is included as a PDF file in the Intelligent

Monitor AiM, which can be downloaded on our Internet

website.

This manual describes installation method, operation

method, functional details and error messages of the

software.

It also describes an evaluation analysis of HL-C2 Series or

use of buffering function and received light intensity

waveform display function, which are useful for optimum

system setting.

Ultra High-Speed, High-Accuracy

Laser Displacement Sensor

HL-C2 Series

User's Manual

ME-HLCSAIM-08

2013.6

panasonic.net/id/pidsx/global

Intelligent Monitor AiM

ME-HLCSEN-02

2013.6

panasonic.net/id/pidsx/global

Ultra High-Speed, High-Accuracy

Laser Displacement Sensor

HL-C2 Series

User's Manual

Ethernet Communication Control

Preface

Manual Construction

This chapter provides cautions for safe and correct

operation of the product. Be sure to read this chapter.

Preface

Communication

Tool Software

Configurator WD

General

Description

This chapter explains the general description of

Ethernet

This chapter explains settings of communication tool

software Configurator WD.

Preface

Contents

Whole USER’S MANUAL Construction

················································· 1

Manual Construction······················ 3

Contents ····································· 4

Safety Precautions ························ 5

For Correct Use···························· 6

Correct Handling··························· 6

Cautions on Handling Laser Light ····· 6

Standards···································· 6

1General description ···········1-1

1-1 Ethernet Specifications ············1-2

1-2 Ethernet Communication Settings

···············································1-3

2Communication Tool Software

Configurator WD··················2-1

2-1 Setting Items ·························2-2

2-2 Operation Method···················2-5

Preface

Safety Precautions

This product is intended to detect the objects and does not have the control

function to ensure safety such as accident prevention.

Do not use the product as a sensing device to protect human body.

Please use the products that comply with local laws and standards for human

body protection specified by e.g., OSHA, ANSI and IEC.

Please read this manual carefully before using the product and use it

correctly.

■Symbol Indications

This manual uses symbols to indicate safety precautions, instructions, and

reference.

Before reading this manual, fully understand the meanings of these

indications.

“WARNING” indicates the possibility that death or

serious injury could result if a handling error occurs.

“CAUTION” indicates the possibility that the user could

be injured or property could be damaged if a handling

error occurs.

“CHECK” indicates any instructions or precautions for

using the system.

“REFERENCE” indicates any hints for operation, detail

explanations, or references.

“TECHNIQUE” indicates useful conditions or techniques

(know-how) for operation of the system.

●Install a fail-safe device when the product is used for the purpose that

has a possibility of physical injury or serious extended damage.

●Do not use the product in the atmosphere of flammable gas, to prevent

explosion.

●Use the product within specifications.

Abnormal heat or smoke generation may occur.

●Do not disassemble or remodel the product. Electrical shock or smoke

generation may occur.

●Connect the electric wire securely with the terminal screws.

Imperfect connection may cause abnormal heat or smoke generation.

●Do not touch the terminal during energization of the product, to prevent

electrical shock.

Preface

For Correct Use

This operation manual explains a variety of settings that enable PLCs to

acquire measurement information on the HL-C2 System over Ethernet

communication.

Please read “HL-C2 Series USER’S MANUAL” (separate volume) for a

detailed description of each system function and information on operational

precautions.

Correct Handling

For the items listed below, refer to “HL-C2 Series USER’S MANUAL”

(separate volume).

・

Installation Environment

・

Use Environment

・

Measures to Noise

・

Warming Up Time

・

Insulation Resistance and Voltage Resistance

・

Power Supply

・

Instantaneous Power Failure

・

Grounding

・Installation

Cautions on Handling Laser Light

Refer to “HL-C2 Series USER’S MANUAL”.

Standards

Refer to “HL-C2 Series USER’S MANUAL”.

1-1

General description

This chapter explains the general description of Ethernet.

1-1 Ethernet Specifications ···················1-2

1-2 Ethernet Communication Settings ····· 1-3

Chapter 1 General description

1-2

1-1 Ethernet Specifications

Interface RJ45

Transmission

specifications

Baud rate

10BASE-T / 100BASE-TX

Transmission method Baseband

Max. segment length 100m

Support command

MEWTOCOL (Master)

iQSS-supporting MC protocol

communication (Sensor slave node)

MC Protocol (Master)

Support tool Configurator WD (Ver. 1.63 or later)

MEWTOCOL: Supports MEWTOCOL-COM communication.

iQSS supporting: An iQ Sensor solution of Mitsubishi Electric Corp.

MC protocol: Used to write data from the HL-C21C to memories of

PLCs manufactured by Mitsubishi Electric Corp. This protocol supports

QnA-compatible 3E frame commands.

HUB

Support tool: Configurator WD

Command

Response

HL-C21C

Otros manuales para HL-C2 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de Panasonic

Panasonic

Panasonic CA-LSR10U - Sirius Satellite Radio Receiver Manual de usuario

Panasonic

Panasonic Light Emitting Diodes LNJ214R8ARA Manual de usuario

Panasonic

Panasonic HL-G1 Series Manual de usuario

Panasonic

Panasonic HL-C1 Series Manual de usuario

Panasonic

Panasonic HG-C1030 Manual de usuario

Panasonic

Panasonic MA2Z784 (MA784) Manual de usuario

Panasonic

Panasonic MA27077 Manual de usuario

Panasonic

Panasonic GX-M Series Manual de usuario

Panasonic

Panasonic CF-VNP016 Manual de usuario

Panasonic

Panasonic AY-PB2003 Manual de usuario

Panasonic

Panasonic Fast Recovery Diodes MA3DF40 Manual de usuario

Panasonic

Panasonic MA2J111 (MA111) Manual de usuario

Panasonic

Panasonic HL-G1 Series Manual de usuario

Panasonic

Panasonic WJ-PB85A32 Manual de usuario

Panasonic

Panasonic EX-10 Series Manual de usuario

Panasonic

Panasonic MA2SP01 Manual de usuario

Panasonic

Panasonic EX-FC1 Manual de usuario

Panasonic

Panasonic TYTP10E Manual de usuario

Panasonic

Panasonic HG-T1110 Manual de usuario

Panasonic

Panasonic MA4X159A Manual de usuario

Panasonic

Panasonic MA6Z121 Manual de usuario

Panasonic

Panasonic CY-100 Series Manual de usuario

Panasonic

Panasonic KX-HNS101 Manual de usuario

Panasonic

Panasonic MA3X199 (MA199) Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manual de usuario