OZTENT Malamoo Teepee 9 Manual de usuario
Description:
The Malamoo Teepee 9 is a traditional tent design that gives unprecedented open floor space. The
easy to set up pole gives a floor width of 440cm/173.2”and a height of 280cm/110.2”. The internal
pole goes to the sides of the tent to give you uninterrupted floor space.
The Malamoo Teepee 9 is a huge tent that is extremely easy to set up but still weighs less than
8kg/17.6lb
Key Features:
Easy assembly
Uninterrupted floor space
Large windows and door for ventilation
UPF50+ and 100% waterproof
Sleeps 9
Features
Easy assembly Simply peg out the base, assemble the pole,
insert
it so that it runs along the sides of the tent
and
you’re done! Easy setup so you can be
sitting
around the campfire sooner.
Uninterrupted floor space No poles in the middle of the floor means you
can
utilize all the floor space. Fit 9 people inside
or
spread out and setup your own
glamping
experience.
Large windows and door for ventilation Ventilation is important in all weather to
reduce
heat in the warmer months and to
reduce
condensation in the colder months.
100% Waterproof We guarantee that all of our tents are 100
%
waterproof so you can sleep in peace.
UPF50+ protected Built to survive under harsh Aussie conditions
and
keep you properly sheltered from the sun
Compact pack size Pack down is simple, and the pack size is
compact,
meaning this tent can fit easily into any car
and
carried short distances.
Specifications:
Material
Tent 190T Polyester
Floor 120G PE floor
Frame 25mm gauge steel
Dimensions
Packed Size 75cm (L) x 25cm (W) x 25cm (H)
29.5” (L) x 9.8” (W) x 9.8” (H)
Set Up Size 440cm (L) x 440cm (W) x 280cm (H)
137.8” (L) x 137.8” (W) x 98.4” (H)
Weight 7.5kg
16.5lb
Warranty
Warranty Period 2 years (Manufacturers)
Package Contents Quantity
Tent 1
Guy Ropes 17
Pegs/Stakes 26
Owner’s Manual 1
Carry Bag 1
All images shown remain the property of the publisher. All images used in this datasheet are for
illustration purposes only and actual items may vary in appearance. Precautions have been taken to
assure accuracy of the information on this sheet. Typographic or pictorial errors that are brought to our
attention will be corrected in subsequent updates. Product dimensions shown here are nominal and are
provided for the convenience of our customers. The Oztent Group reserves the right to make product
changes from time to time, without prior notification, which may change the dimensions shown. The
designs and dimensions of the products listed on this sheet are correct at the date of last publication
and are subject to change without notice. MASHTETP09A
MALAMOO TP-9
ASSEMBLY INSTRUCTIONS
Step One: Assemble part A of the support pole, ensuring all sections are fully inserted into each other [Figure 1].
Figure 1
Step 2: Spread out the tent on the ground in your preferred location. Pull out the corners and loosely peg the tent to
the ground [Figure 2].
Step Three: Go inside the tent with assembled Support Poles, insert the top end of pole A in the tent apex, insert
pole B and align the poles to sit on the reinforced padding on either side of the tent floor. Pull out the corners and
firmly peg the tent to the ground [Figure 3]. In windy conditions, ensure all guy ropes are securely pegged to the
ground as illustrated.
A
B
B
A
Figure 3
Figure 2
Tabla de contenidos
Otros manuales de Carpa de OZTENT
OZTENT
OZTENT MALAMOO XH 2-P Manual de usuario
OZTENT
OZTENT RS-1 Manual de usuario
OZTENT
OZTENT RV-3 Lite Manual de usuario
OZTENT
OZTENT RV Manual de usuario
OZTENT
OZTENT RX-5 Manual de usuario
OZTENT
OZTENT Oxley 5 Manual de usuario
OZTENT
OZTENT RS-1 Manual de usuario
OZTENT
OZTENT BUNKER XL Manual de usuario
OZTENT
OZTENT SV-5 MAX Manual de usuario
OZTENT
OZTENT RX-5 Manual de usuario
