Ovislink AirLive N.MINI Guía de instalación
Q:
How to connect to Wireless ISP with N.MINI and sharing wireless signal to
other clients ?
A.
If your N.MINI’s firmware is prior to the version of v74.11.0.2.1e_b9 ,
then please upgrade the latest firmware version.
1.>Please switch the bar to client mode, connect your PC to N.MINI’s ethernet
port via a LAN cable, then connect the supplied power adapter and power
on the N.MINI.
2.> Ensure that your PC and N.MINI are on the same network segment
, say your PC’s IP is 192.168.1.100 subnet mask 255.255.255.0 .
3.>Open the browser and enter 192.168.1.253 to login the web management.
4.> Press the Basic Settings and select WISP mode from the pull list.
5.>Check the box to enable the Universal Repeater Mode , and enter with a
SSID . Then click the “Apply Changes” button to save the setting.
6.> Click “Reboot Later” button , then configure the WAN setting
7.>Click “WAN Interface” for WAN Interface Setup .
8.>Choose the WANAccess Type from the pull list depends on your ISP’s
internet access assign .
9.> Then click the “Apply Changes” button to save the setting.
10.>Click “Site Survey” to search your WISP’s AP
11.>Choose your WISP’s AP then click “Connect” button
12.>Then click “Reboot” to reboot the N.MINI.
13.>If N.MINI could not get public IP successfully, please check
whether the WAN settings and security settings are correct.
Otros manuales de Punto de acceso inalámbrico de Ovislink
Ovislink
Ovislink Air Live WL-5450AP Manual de usuario
Ovislink
Ovislink AirLive WLA-5000AP Manual de instrucciones
Ovislink
Ovislink Air Live WL-5470AP Manual de usuario
Ovislink
Ovislink AirLive IGR-1500 Manual de usuario
Ovislink
Ovislink AirLive WH-9100MESH Manual de usuario
Ovislink
Ovislink AirLive N.TOP Manual de usuario
Ovislink
Ovislink evo-w54apV2 Manual de usuario
Ovislink
Ovislink Air Live AirMax4GW Manual de usuario
Ovislink
Ovislink EVO-W54ARv2 Manual de usuario
Ovislink
Ovislink WL-5420AP Manual de usuario
