Otto Bock Z50 Instrucciones de funcionamiento

z50

Service Instructions

Table of Contents

1 General View .............................................................................................................................2

2 Safety ..................................................................................................................................3

3 Preface ...................................................................................................................................5

4 Required Tools .......................................................................................................................... 5

5 Adjusting and Replacing ........................................................................................................... 6

5.1 Control Unit ................................................................................................................ 6

5.2 Battery Packs / Fuse ..................................................................................................8

5.3 Motors................................................................................................ ......................13

5.4 z50 Wheels...............................................................................................................15

5.5 Anti-tippers ...............................................................................................................17

5.6 Options.....................................................................................................................17

5.7 Frame / Adapter Plates.............................................................................................18

5.8 Assembly of the z50 to Manual Wheelchairs ............................................................. 18

6 Maintenance Plan....................................................................................................................19

1 General View

Desk side panel

Control unit

Battery pack

Footrest

Release lever

z50 wheel with hub motor

Swinging anti-tipper

2 Safety

Observe the following guidelines for maintenance or repair work:

Danger!

Use caution near flammables or especially when holding lit cigarettes. The back upholstery and

seat cushion may catch fire.

Danger!

When getting into or out of the wheelchair with power add-on drive, the electronic control must

be switched off.

Danger!

When using lifting platforms, be sure that the wheelchair is standing centrically on the lifting

platform area and that none of the wheelchair‘s components, such as the anti-tipper, are

protruding into the danger area.

Danger!

Explosive gases can develop while the batteries are charging. For this reason, provide for

sufficient ventilation when using the battery charger in closed rooms. Do not smoke when near

the battery charger or handling the batteries. Avoid fire and sparks!

Danger!

When mounting the z50 wheel or manual wheelchair wheel, make sure before driving that the

locking mechanism has engaged (see sections ‘Assembly of the z50 Wheel’ and ‘Assembly of

the Manual Wheelchair Wheel’ in the Instructions for Use).

Attention!

After cleaning the z50 power add-on drive check its operating performance.

Attention!

Driving over a longer period of time with only 2 LEDs of the battery indicator lit will result in

battery discharge. To avoid function failure and permanent damage, charge the battery of the

z50 power add-on drive immediately.

Attention!

To avoid overheating the battery charger, make sure that the cooling ribs or vent slots are

uncovered.

Attention!

To prevent uncontrolled driving through accidental joystick manipulation, switch off the

wheelchair when nobody is using it or the driving function is not required.

Attention!

Do not use the footplates when getting into or out of the wheelchair.

Attention!

Never use a water hose or high-pressure cleaning apparatus for cleaning the wheelchair.

Note!

Use appropriate tools.

Note!

Always use insulated tools when working on the batteries.

Note!

Wear appropriate clothing, including gloves and safety glasses, if necessary.

Note!

Secure the product to prevent it from tipping over or falling off the workbench.

Note!

Read the service and maintenance instructions before starting.

Note!

Familiarize yourself with the functions of the product. If you are not familiar with the product,

read the Instructions for Use before inspecting the product.

Note!

If no Instructions for Use are available, please order one from the manufacturer. (Refer to the

overview of all Otto Bock Branches ‘Otto Bock Worldwide’.)

Note!

You can also download the document from our homepage under www.ottobock.de or

www.ottobock.com.

Note!

Clean or disinfect the product before starting inspection. See the Instructions for Use for care

instructions or specific product inspection information.

Note!

Many of the screw fastenings use thread lock or nylock nuts. If you have to undo such screw

fastenings, replace the nut or screw with a new thread lock and/or nut. If new screws or nuts

with thread lock are not available, use a medium-strength liquid thread lock substance (such as

Euro Lock A24.20).

Note!

To allow for complete charging current to be fed into the battery, the control is to be switched off

during the charging process.

Note!

When the z50 power add-on drive is not used over extended periods of time or for dispatching

the add-on drive, the main plug should be removed to avoid standby current of the control.

4 Required Tools

The following list ensures that you use the right implement for every procedure. You will find the maintenance

plan at the end of the service instructions manual.

Reversible ratchet handle wrench

and sockets, sizes 8 – 21

Allen wrenches,

sizes 2.5 – 8

Wrenches,

sizes 8 – 24

Water pump pliers DIN 8976,

gripping width up to 32 mm

Screwdrivers, blade

widths 2.5/3.5/5.5 mm

Phillips head screwdriver, size 2 mm

Plastic hammer Hammer approx. 300 g Side cutting pliers

3 Preface

Regular maintenance is important. It increases safety and prolongs the service life of the product.

All rehab products should be inspected and serviced once a year. If the product is used frequently, or if it is used by

growing children or patients with changing clinical conditions, we recommend readjusting and servicing the product

every 6 months. Use only original spare parts for all service and maintenance. The service and maintenance described

in this manual should be performed by trained specialists only and not by the user. This service and maintenance

manual refers to the spare parts catalog and Instructions for Use. For this reason, it is important to use these

documents together.

Liquid thread lock ‘medium strength’

Both variants of the control panel holder for the z50 are attached to the armrest beneath the armrest pad. To

remove the control panel, first pull out the central plug which is attached to the frame, and then remove the

control panel.

5 Adjusting and Replacing z50

5.1 Control Unit

There is only one control panel variant available for the z50 power add-on drive. The control panel is

attached to the plug-on holder with two screws. Therefore, the control panel is disconnectable and can be

easily mounted and removed.

Note:

For adaption of the z50 power add-on drive, the desk side panel is always recommended!

Control panel holder

Standard control panel holder

The two control panel holders are attached in the same way to the side panel of the manual wheelchair. Both

are clamped with an iron rail to the underside of the armrest pad of the desk side panel.

Control panel holder, swing-away in parallel

The central plug is attached to the crossbrace where

both braces run closely along each other.

First attach the two plastic clips to the crossbrace.

Screw the metal sheet for central plug attachment

onto these clips. For this purpose you require the

Allen wrench size 3.

Make sure when laying the cables leading to the

central plug that the cables are not clamped while

folding the wheelchair. Always secure cables to

braces with cable ties at random intervals.

Central Plug

5.2 Battery Pack / Fuse

Battery

The z50 standard equipment includes a 12 Ah gel battery pack. A 16 Ah gel battery pack is available as an

option.

Except for battery charging, these battery packs do not require servicing.

For installation of the battery case, first connect the battery cable plug into the battery case's receptacle and

lock and engage the plug by rotating it to the right. Put the battery case into the carrying bag and secure with

hook and loop flap.

To disconnect the battery cable, slide the silver locking pin slightly to the rear and rotate the plug to the left

until it reaches the stop. Remove the plug from the battery case to separate the battery from the wheelchair.

Battery Charging

The remaining battery capacity determines the distance range of the z50 power add-on drive. Many factors

have an influence on the battery's capacity. Besides the ambient temperature, the age of the batteries and

the time and extent of driving, the way you charge the batteries has considerable effects on the capacity and

thus on the distance range.

Driving over a longer period of time with only the red LEDs of the battery indicator lit will result in battery

discharge and thus battery damage. In addition, there is the risk that the z50 may stop due to zero battery

capacity and put the user in a dangerous situation.

If the z50 is not used for a longer period of time, a charging cycle should be carried out once a week to

maintain the battery's capacity.

Note:

The warranty is void in case of damages that result from a totally discharged battery. When the

z50 is not used over extended periods of time it must be charged once a week. Only use the

battery charger provided by Otto Bock.

The indications on the type plate of the battery charger must be identical to the voltage of the mains supply

of your country. Charging will start automatically. The current charging state is indicated by the LEDs of the

battery charger.

Tabla de contenidos

Otros manuales de Ayuda a la movilidad de Otto Bock

Otto Bock

Otto Bock BionicLink 60X3 Manual de usuario

Otto Bock

Otto Bock SKIPPI Manual de usuario

Otto Bock

Otto Bock Xeno Manual de usuario

Otto Bock

Otto Bock SBK 33904.002 Manual de usuario

Otto Bock

Otto Bock Nurmi Manual de usuario

Otto Bock

Otto Bock Nurmi Neo Series Manual de usuario

Otto Bock

Otto Bock Charly 2319 Manual de usuario

Otto Bock

Otto Bock Discovery Manual de usuario

Otto Bock

Otto Bock C1000 DS Instrucciones de funcionamiento

Otto Bock

Otto Bock Dino 3 Manual de usuario

Otto Bock

Otto Bock Discovery Manual de usuario

Otto Bock

Otto Bock Kimba Manual de usuario

Otto Bock

Otto Bock Pheon 3R62 Manual de usuario

Otto Bock

Otto Bock Veldink4kids Kiddo Classic Manual de usuario

Otto Bock

Otto Bock 2R117 Manual de usuario

Otto Bock

Otto Bock SBK 20465.005 Manual de usuario

Otto Bock

Otto Bock HR2233 0000 K Manual de usuario

Otto Bock

Otto Bock 50S10 Malleo Immobil Walker high Manual de usuario

Otto Bock

Otto Bock 3R80 Manual de usuario

Otto Bock

Otto Bock Lisa Manual de usuario

Otto Bock

Otto Bock 436P2 Series Manual de usuario

Otto Bock

Otto Bock SBK 21187 006 Series Manual de usuario

Otto Bock

Otto Bock 2R2 Manual de usuario

Otto Bock

Otto Bock 3R41 Manual de usuario

Manuales populares de Ayuda a la movilidad de otras marcas

Alber

Alber Scalamobil iQ Manual de usuario

Ferno

Ferno CCT-PX Manual de usuario

HEPRO

HEPRO Gripo Manual de usuario

NRS Healthcare

NRS Healthcare M11090 Manual de usuario

Medline

Medline MDS86835DSHEC Guía de instalación

Guldmann

Guldmann Twin Turner II Manual de usuario

Drive

Drive ROOMBA Manual de usuario

Gate

Gate Balder Manual de usuario

Decon wheel

Decon wheel TNS Notos Manual de usuario

ExoAtlet

ExoAtlet ExoAtlet-II Manual de usuario

Invacare

Invacare Storm Series Manual de instrucciones

Rhythm Healthcare

Rhythm Healthcare B3800F Manual de usuario

AMF-BRUNS

AMF-BRUNS PROTEKTOR Manual de usuario

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Manual de usuario

Rhythm Healthcare

Rhythm Healthcare C500U Manual de usuario

Lumex

Lumex RJ4200A Manual de usuario

Rebotec

Rebotec Jumbo Manual de usuario

Rehaforum MEDICAL

Rehaforum MEDICAL PR50548 Manual de usuario

Otto Bock z50 Instrucciones de funcionamiento

Manuales populares de Ayuda a la movilidad de otras marcas