ORiNG IDS-5612 Series Manual de usuario
Industrial Device Server User’s Manual
IDS-5612 Series
Version 1.0
May 2008.
ORing Industrial Networking Corp.
4F., NO.3, Lane235, Baociao Rd.Sindian City,
Taipei County 23145 Taiwan, R.O.C.
Tel: + 886 2 2918 3036
Fax:+ 886 2 2918 3084
Website : www.oring-networking.com
Table of Content
GETTING TO KNOW YOUR DEVICE SERVER ................................................................................................1
1.1 About the IDS-5612 Serial Device Server..........................................................................................1
1.2 Software Features .............................................................................................................................1
1.3 Hardware Features ............................................................................................................................2
HARDWARE INSTALLATION ........................................................................................................................3
2.1 Install IDS-5612 on DIN-Rail..............................................................................................................3
2.1.1 Mount IDS-5612 on DIN-Rail......................................................................................................................3
2.2 Wall Mounting Installation ..................................................................................................................4
2.2.1 Mount IDS-5612 on wall ..............................................................................................................................5
HARDWARE OVERVIEW .............................................................................................................................8
3.1 Front Panel ........................................................................................................................................8
3.2 Front Panel LEDS..............................................................................................................................9
3.3 Top Panel..........................................................................................................................................10
3.4 Bottom Panel ....................................................................................................................................10
3.5 Rear Panel........................................................................................................................................12
CABLES ..................................................................................................................................................13
4.1 Ethernet Cables ................................................................................................................................13
MANAGEMENT INTERFACE .......................................................................................................................15
5.1 DS-Tool.............................................................................................................................................15
5.1.1 Install IDS-Tool ...........................................................................................................................................15
5.1.2 Using DS-Tool.............................................................................................................................................17
5.1.2.1 Explore device servers ......................................................................................................................17
5.1.2.2 Configure device servers...................................................................................................................18
5.1.2.3 Configure serial port .........................................................................................................................28
5.2 Configuration by Web Browser .........................................................................................................37
5.2.1 Connect to the Web page .............................................................................................................................37
5.2.1.1 System...............................................................................................................................................39
5.2.1.2 Port serial setting...............................................................................................................................45
5.2.1.3 Management......................................................................................................................................54
IDS-5612 Series User’s Manual
5.2.1.4 Save/Reboot ......................................................................................................................................59
5.3 Configuration by SSH Console .........................................................................................................60
5.3.1 Connect to DS..............................................................................................................................................60
5.4 Configuration by Console Command ................................................................................................61
TECHNICAL SPECIFICATIONS ....................................................................................................................63
IDS-5612 Series User’s Manual
1 ORing Industrial Networking Corp.
Getting to Know Your Device Server
1.1 About the IDS-5612 Serial Device Server
IDS-5612 is an innovative 1 port RS232/422/485 to 2 ports LAN
redundant device server. To assure the agility and security of critical
data, IDS-5612 offers many powerful features for HW & SW redundant
functions. When the connection between master-link and LAN fails, the
IDS-5612 can automatically switch to another LAN port within 10mS, and
still guarantees a non-stop connection.
IDS-5612 also supports switch mode, you can use Daisy Chain to reduce
the usage of Ethernet switch ports. Secondly, the IDS-5612 can
simultaneously transfer data into 5 host PCs. This feature can assure all critical data that
saved in different host PC to avoid Ethernet break or host PCs failure. IDS-5612 also Support
the data encryption with SSL, so it can assure the data transfer safely.
Thirdly, the IDS-5612 provides dual redundant power inputs on DC power jack and terminal
block. IDS-5612 also provides NAT pass through function so that you are able to manage
IDS-5612 inside or outside the NAT router. It is easy for different IP domain to use IDS-5612.
You can configure and mange the device server easily by using the windows management tool
(DS-Tool). Therefore, IDS-5612 is the best communication redundant solution for current
application of serial devices
1.2 Software Features
Redundant Dual Ethernet Ports: Recovery time < 10mS
Switch Mode Supported: Daisy Chain support to reduce usage of switch ports
IDS-5612 Series User’s Manual
ORing Industrial Networking Corp 2.
NAT-pass through: User can manage IDS-5612 through NAT router
PPPoE for internet connection.
Data Encryption with SSL for Security data transfer.
DDNS for domain name service.
Redundant Power Inputs: 12~48VDC on power jack and terminal block
Redundant multiple host devices: 5 simultaneous in Virtual COM, TCP Server, TCP Client
mode, UDP
Secured Management by HTTPS and SSH,
Serial console Management: Console command.
Versatile Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
Event Warning by Syslog, Email, SNMP trap, and Beeper
Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA
1.3 Hardware Features
Redundant Power Inputs: 12~48 VDC on terminal block and power jack
Operating Temperature: -10 to 60oC
Storage Temperature: -20 to 85oC
Operating Humidity: 5% to 95%, non-condensing
Casing: IP-30
2 10/100Base-T(X) Ethernet port
Dimensions(W x D x H) : 72mm(W)x125 mm(D)x31mm(H)
IDS-5612 Series User’s Manual
3 ORing Industrial Networking Corp.
Hardware Installation
2.1 Install IDS-5612 on DIN-Rail
Each IDS-5612 has a Din-Rail kit on rear panel. The Din-Rail kit helps IDS-5612 to fix on the
Din-Rail. It is easy to install the IDS-5612 on the Din-Rail:
2.1.1 Mount IDS-5612 on DIN-Rail
Step 1: Slant the IDS-5612 and mount the metal spring to Din-Rail.
Figure 2-1
Metal
Spring
IDS-5612 Series User’s Manual
ORing Industrial Networking Corp 4.
Step 2: Push the IDS-5612 toward the Din-Rail until you heard a “click” sound.
Figure 2-2
2.2 Wall Mounting Installation
Each IDS-5612 has another installation method for you. A wall mount panel can be found in
the package. The following steps show how to mount the IDS-5612 on the wall:
IDS-5612 Series User’s Manual
5 ORing Industrial Networking Corp.
2.2.1 Mount IDS-5612 on wall
Step 1: Remove Din-Rail kit.
Figure 2-3
IDS-5612 Series User’s Manual
ORing Industrial Networking Corp 6.
Pozidrive
Step 2: Use 6 screws that can be found in the package to combine the wall mount panel.
Just like the picture shows below:
Figure 2-4
The screws specification shows in the following two pictures. In order to prevent IDS-5612
from any damage, the size of screws should not be larger than the size that used in
IDS-5612.
Figure 2-5
Tabla de contenidos
Otros manuales de Servidor de ORiNG
ORiNG
ORiNG IDS-312L Manual de usuario
ORiNG
ORiNG IDS-342GT+ Manual de usuario
ORiNG
ORiNG IUSB-9000 Series Manual de usuario
ORiNG
ORiNG IDS-5042 Series Manual de usuario
ORiNG
ORiNG IDS-5011F Series Manual de usuario
ORiNG
ORiNG IDS-1112 Manual de usuario
ORiNG
ORiNG IDS-342GT Manual de usuario
ORiNG
ORiNG IDS-181A Manual de usuario
ORiNG
ORiNG IDS-4312+ Manual de usuario
ORiNG
ORiNG IDS-5042-WG Series Manual de usuario
