Orava MM-902 Manual de usuario
Meat grinder
MM-902
Instruction manual EN
MM-902
2EN
Intended use of the device
The equipment is intended solely for grinding (fine chopping) of meat cleaned of bones,
cartilage and tendons, pulp and/or similar food and for making sausages, to the extent
determined by the technical and operational parameters and functions of the equipment,
safety and user instructions and environmental impacts of the operating environment.
ORAVA electrical appliances are manufactured according to the state of the art and
recognized safety rules. Nevertheless, improper and unprofessional use or use that is not
intended for use may result in injury or danger to the life of the user or third party. damage
to the device and other material values.
1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS
• This document contains important safety instructions and warnings for safe, correct and
economical operation of the electrical equipment. Its compliance helps the user avoid
risks, increase reliability and product life.
• In this document, the general term product is used in text parts such as:
electrical equipment - any device used for the production, conversion, transmission,
distribution or use of electricity.
• From the point of view of the purpose of using electricity, the concept of electrical
equipment in the strict sense of the word will include the following categories:
- household electric appliances,
- information and communication equipment,
- consumer electronics,
- lighting equipment,
- electrical and electronic tools,
- toys and equipment for sporting and recreational purposes,
- medical devices (aids),
- monitoring and control devices,
- vending machines.
1.1 General safety instructions
• Before operating the unit, we recommend that you carefully read the instruction manual
and operate the equipment in accordance with the instructions!
• The safety instructions and warnings in this manual do not cover all the possible
conditions and situations that may arise when using the device. The user must
understand that a factor that cannot be incorporated into any of the products is personal
responsibility and caution. These factors must therefore be ensured by users serving
this device.
• Failure to follow the safety instructions and warnings is forbidden by the manufacturer
for any damage to health or property!
• Keep the instruction manual as close to the device as possible throughout its service
life. Always keep the instruction manual together with the appliance for future use and
use by new users.
• Use the appliance only for the intended purpose and in the manner specified by the
manufacturer.
• The appliance is intended for home and similar indoor use without special focus.
• This appliance is intended, in addition to domestic use, for the following uses:
- in shops, offices and other similar work environments;
- in economic buildings;
- in hotels, motels and other residential environments;
- in bed and breakfast establishments.
• It is not a professional device for commercial use.
• Do not change the technical parameters and features of the device by unauthorized
modification or modification of any part of the device.
• The manufacturer is not responsible for damages caused during transportation, misuse,
damage or destruction of the equipment due to adverse weather conditions.
3EN
1.2 Safety of the operating environment
• Do not use the device in an industrial environment or outside environment!
• Do not expose the appliance to:
- sources of excessive heat or open flame,
- dripping or splashing water,
- vibration and excessive mechanical stress,
- insects, animals and plants,
- aggressive and chemical substances.
• The operating environment of the device must always be in accordance with the basic
characteristics set out.
• Features of the operating environment:
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or occurrence of water vapor
5. Occurrence of foreign bodies: quantity and type of dust are insignificant
6. Protection degree: min. IP20 (device protected from touching dangerous parts by hand
and non-waterproof)
• This degree of protection is not indicated on the product and on the technical
parameters in the operating instructions.
• If the protection class of the product is different from IPX0, this information is then
displayed on the label of the appliance or in the technical data of the operating
instructions.
• Other characteristics of the domestic operating environment (mechanical stress -
vibrations and vibrations, occurrence of plant, animals, weather effects ...) are negligible
in terms of effect on the correct and safe use of electrical equipment.
1.3 Electrical safety
• Before connecting the appliance to the power supply for the first time, make sure that
the voltage on the appliance label corresponds to that of the household electrical outlet.
• The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz.
• The electrical safety of the appliance is guaranteed only if it is properly connected to the
mains.
• Electrical protection class I equipment is equipped with a protection against electric
shock by means of protective earthing of inanimate parts, which can become dangerous
when the device is malfunctioning. Always connect such devices to properly installed
mains sockets that are equipped with earthing conductors and have a properly
grounded earthing conductor.
All electrical equipment is equipped with a three-wire power supply.
• Class II electrical equipment is protected against electric shock by double insulation or
by enhanced insulation of hazardous live electrical parts. Device of protection class II it
must not be equipped with means to connect protective earthing.
All electrical equipment is equipped with two-wire power supply.
• Class III electrical equipment is a device that is powered by a small safe voltage source
(battery or accumulator) and does not present any danger to the user from electrical
shock.
• In order to provide increased safety against the risk of electric shock due to the use of
electrical appliances by laypersons, it is recommended to install the power supply circuit
for sockets with a rated current not exceeding 20 A RCD with a rated operating current
not exceeding 30 mA.
To ensure the safety and correctness of the electrical installation, consult a qualified
electrician.
• Only use a power cord with a plug (mains lead) supplied with the device and compatible
with a wall socket. Using another cable may result in fire or electric shock.
• Always connect an electrical appliance to an easily accessible mains socket. In the
event of an operating fault, the appliance must be switched off as soon as possible and
disconnected from mains supply.
4EN
• The power cord and mains plug must always be easily accessible for safe disconnection
of the electrical appliance from the power supply.
• Do not pull off the power cord by pulling the cable. Disconnect the power cord by pulling
the plug behind the power cord plug.
• If you use an extension cord, make sure that the total rated power of all devices
connected to the extension cord does not exceed the max. current load on the extension
cable.
• If you need to use an extension cord or power supply block, make sure that the
extension cord or power pack is plugged into a power socket, and not to another
extension cord or power supply. The extension power cord or power supply block
must be designed for grounded electrical plugs and connected to a properly grounded
electrical socket.
• The power plug of the appliance must be compatible with the mains socket. Never
use any adapters or modify the socket in any other way. Do not use inappropriate or
damaged drawers!
• To avoid electrical shock, plug the power cables into properly grounded electrical
sockets. If the device is equipped with a 3-pole plug, do not use adapters that do not
have a grounding element or remove the grounding element from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord of the appliance to mechanical
stress or external heat sources. Damage to the power cord may result in electric shock.
• When the power cord is damaged, disconnect the appliance from the mains and do not
use it again.
• If the power cord is damaged, it must be replaced by the manufacturer, its service
department or a similarly qualified person to avoid the risk of electric shock.
• Regularly check and maintain the electrical appliance as well as the power cord and
power socket. Disconnect the power plug regularly and clean it if necessary. Pollution by
dust or other substances may cause disruption of the insulating state and consequently
fire.
• Do not expose the appliance to water or moisture. The ingress of water into the
appliance increases the risk of electric shock.
If the power cord is wet or the water has penetrated the water, disconnect it immediately
from the mains. If the appliance is plugged into a mains socket and if possible, turn off
the power circuit before attempting
unplug the power. If you are pulling wet wires from a live power source, be very careful.
• If the electrical equipment is installed (connecting) the protective covers are dismantled,
the electrical parts must not be accessible to the user when the installation is finished.
1.4 Safety of persons
• This appliance is intended for use and operation by persons without electrotechnical
qualification - lay people, according to the instructions specified by the manufacturer.
• Device operation includes activities such as switching on and off, user manipulation and
setting of operating parameters, visual or auditory inspection of the equipment, and user
cleaning and maintenance.
• This appliance can be used by children under the age of 8 and persons with reduced
physical, sensory or mental capabilities or lack of experience or knowledge when
supervised or instructed to use the appliance safely and understand the dangers
involved.
• Children may not play with the appliance.
• Cleaning and maintenance for users may not be performed by children unattended.
• Always keep the appliance out of reach of children during use and operation. Be sure to
download the appliance even for a freely accessible power cord.
• Always be careful when operating the electric appliance! Do not use an electric
appliance if you are overly tired, under the influence of medication or narcotic drugs that
reduce attention and focus.
• Inattention during operation may result in serious injury.
5EN
1.5 Cleaning, maintenance and repairs
• Observe the normal user cleaning and maintenance of the appliance in the
recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution
and visible stains from finger contact, respectively. The hands can be cleaned using
detergent detergents specially designed to clean household appliances.
• If you do not use the appliance, clean it or disconnect the appliance from the power
supply when the appliance is faulty.
• Electrical appliances that are cleaned after use and are not intended to be completely or
partly immersed in water or other liquid, protect against the effects of dripping and / or
splashing water and before immersion.
• Electric household appliances, like all other technical devices, are subject to the
surrounding environment and natural wear. Since the legal framework of regular
maintenance is not laid down for lay-in electrical household appliances, the
manufacturer recommends that the user have the appliance checked and cleaned at
least once a year by a specialist workshop.
• By doing so, it is possible to achieve safety, operational reliability and increased service
life.
• Do not disassemble the electric appliance! The appliance works with a dangerous
voltage. For this reason, always switch off the appliance and disconnect it from the
mains supply during user maintenance. In the event of a fault, please have the repair
serviced by an authorized service center.
• Before calling a service:
1. Verify that you are unable to remedy the malfunction yourself according to the
procedure described in the chapter „Remedy of operating faults“.
2. Turn the appliance off and on to make sure the fault reappears.
3. If the malfunction of the appliance still persists after these operations, call the nearest
specialist service center.
• Never repair the electric appliance yourself!
• Unauthorized, unqualified and improper use of an electric appliance may result in
electric shock or other serious injury.
• Only carry out the warranty or post-warranty repair of an electrical appliance to an
authorized qualified person (*).
(*) Competent qualified expert: the sales department of the manufacturer or importer or the person qualified
and authorized to carry out this type of activity with the ability to avoid all risks.
6EN
Special safety instructions.
Read carefully!
The electrical equipment is designed and manufactured in such a way as to
allow safe operation and use by persons without professional qualifications.
Despite all the precautions that have been taken by the manufacturer for
safe use, operation and use carry some residual risks and associated
hazards.
The following symbols and their meanings have been used on the device
and in the accompanying documentation to warn of potential hazards:
This symbol warns users that the device is working with hazardous
electrical voltage. Do not remove protective covers on the device.
Failure to follow the safety instructions for use and operation of the
device may result in:
Risk of electric shock!
Risk of serious injury or death!
This symbol warns users that there is a risk of: - serious injury or
danger to life if the safety and operating instructions are not followed!
Risk of equipment damage or other property damage!
This symbol indicates that the product is made with double insulation
between hazardous live parts (power supply dangerous parts) and
parts that are accessible under normal use.
Transportation/Transfer
• When moving and using, to avoid tipping the machine.
• Only transport/transfer the equipment after thorough inspection of the area
and route, which must be free of obstacles.
• Never carry the machine while it is in operation. Do not carry the device
while it is connected to a power outlet.
Warning!
• Some surfaces may become hot during operation. Do not touch heated
surfaces. Never carry the appliance until it has cooled down sufficiently to
ambient temperature.
• Carry the device firmly with both hands at the bottom edge of the base or
solid parts of the body.
• Make sure your hands and equipment are not wet or slippery when carrying
them.
• To maintain safety (with regard to the dimensions and weight of the device),
the device may only be carried by qualified and physically fit persons.
There is a risk of serious injury!
There is a risk of damage to the equipment!
!
7EN
Unpacking/Packaging
• Unpack the equipment and accessories before putting them into service
and remove any parts of the packaging materials and labels. Store
packaging materials in a safe place, especially out of the reach of children
and incapacitated persons or dispose of them safely.
There is a risk of serious injury!
There is a danger of suffocation!
Inspection/Commissioning
• The device is food preparation.Therefore, thoroughly clean all parts
of the unit before commissioning, following the instructions in the
„Commissioning“ section. „Cleaning and maintenance“.
• Never clean the device (its drive unit with electrical parts and controls) and
the power cord with a plug in a manner that could cause liquid to flow into
the machine.
Only clean these parts with a damp cloth and wipe dry or allow to dry.
• Clean the machine only when it is turned off and unplugged from the wall
outlet.
• We recommend that you perform both initial and follow-up periodic
inspections of the equipment.
• Never use the appliance if it is incomplete, damaged, or any part of it has
been damaged during transport or use.
• Do not use non-original and incomplete equipment and accessories.
There is a risk of serious injury!
There is a risk of electric shock!
Location/Installation
• Only place the appliance on flat, firm and stable mats - kitchen worktops
and furniture parts suitable for kitchen appliances.
• Always make sure that the space where you want to place the device has
sufficient space, mechanical strength and suitable lighting.
Warning!
• Do not use or place the device:
- on unstable tables or parts of furniture
- uneven and dirty surface
- on the tight edge of tables or furniture parts
- near containers with water or other liquids.
• Do not cover the device even partially. Do not place any objects on
the device. Do not insert or allow foreign bodies to enter the enclosure
openings.
• Do not block the air vents openings. Air ventilation ensures reliable and safe
operation of the device.
There is a risk of electric shock!
There is a risk of fire!
8EN
Warning!
• Place the machine in a place where children cannot reach it freely.
• Keep children away from the machine. The device may fall over children
and cause serious injury.
• Mechanical damage (breakage of parts and covers) of the machine can
cause serious injury.
There is a risk of serious injury!
There is a risk of damage to the equipment or other material damage!
• Do not place or use the equipment near containers containing water. Do
not remove the device if it falls into the water. First, unplug the power cord
from the wall outlet and then remove it from the water. In such cases, take
the equipment to a specialist garage to check that it is safe and functioning
properly.
There is a risk of electric shock!
There is a risk of electric short circuit!
Operation/Supervision
Caution!
• This equipment must only be used with original parts and accessories.
• Before using the equipment, always make sure that the equipment is
properly assembled and none of its parts are damaged. Do not use
improperly assembled and damaged equipment.
• Always use the appliance with the food funnel in place.
• Fill and handle food only using the supplied pressure roller accessory.
• Always switch off the power and unplug the power cord from the
wall outlet before replacing accessories or accessible parts of the
equipment, before installing and removing and before cleaning and
maintenance.
There is a risk of serious injury!
• Always keep the device under supervision during use and operation!
• This equipment is not intended to be operated by a programmer,
an external timer or remote control, as there is a risk of fire if the
equipment is covered or improperly located.
• If you leave the unit unattended, always unplug it from the wall outlet.
• Before each connection of the equipment to the mains, make sure that
the control knob (main switch) is in the „0“ (Off) position.
• Do not turn the power on or off by plugging in or unplugging the power
cord from the wall outlet.
• Always connect the machine to a power outlet in the normal use, then
turn on the main power switch.
• After use, turn off the main power switch and then unplug the power
cord.
• Do not use the machine if the main power switch does not work.
• The unit is at dangerous voltage when the AC power is connected.
There is a risk of serious injury
• The machine includes rotating sharp-edged parts - a rotating grinding
snake and a chopping knife.
9EN
Warning!
• Do not slide your fingers or insert other objects into the work area -
the inside of the machine and the rotating parts while the machine is
operating.
• If you need to work in the work area (clean the rotating parts from the
caught food) - but only when the machine is turned off, disconnected
from the power supply and the rotating parts have come to a complete
stop, use only the specified equipment accessories or a suitable
object, eg. plastic knife, plastic cup/spatula. Do not use metal objects.
Warning!
• After turning off the machine, the drive of the rotating parts is still
running for some time. Always wait until the rotating parts have come
to a complete stop before handling the equipment. There is a risk of
serious injury!
• Be careful when using and operating the equipment to avoid contact
with rotating parts by hair, loose decorative chains, or loose clothing.
There is a risk of serious injury!
• Do not bundle the power cord. The power cord must remain accessible
for safe disconnection of the equipment from the mains.
• Do not let the power cord hang freely and allow it to be freely
accessible and reachable by children.
• Never leave the appliance open and do not store it with a loose power
cord. Children could overturn the device by pulling the power cord.
• Do not store the device with the cord wrapped around its body. Put the
power cord in the way it was folded in its original packaging from the
manufacturer.
• Never overload the equipment beyond the limits specified in the
technical data!
• Do not switch on the appliance until the food is filled with sufficient
food.
• Do not exceed the maximum content/volume of processed foods
recommended in the food processing information in this manual.
• Allow food to cool before processing cooked foods. Do not process
food above 60 ° C.
• Before proccesing deep-frozen foods, allow the food to defrost
to a temperature at which the food can be divided into smaller
(recommended) parts. Do not process excess pieces of frozen food.
• Always divide the operation mode (continuous operation/operation
time and pause time) into the recommended work intervals and follow
the instructions.
• If you notice any abnormalities (vibration, noise, smell, smoke, etc.)
while using your device, turn off the power and unplug it immediately.
Have the device checked by a specialist .
There is a risk of serious injury!
There is a risk of damage to the equipment or other material damage!
• Only install and remove the equipment, clean it, or handle any parts of
it if the equipment is switched off and unplugged.
There is a risk of serious injury!
10EN
• Always clean the equipment and accessories thoroughly immediately
after use and remove any food residues.
• Store the machine in an upright position - especially its drive unit.
• If any safety part/component (mechanical, electrical/electronic) is part
of the equipment, never disassemble this part/component! If the safety
part/component is damaged or not working, do not use the device!
• Do not use safety parts/components to switch on/off..
• Never underestimate possible hazards and be careful!
Instructions for cleaning surfaces of parts of food contact devices
• The device must not adversely affect the quality and properties of the food when it
is used, so regular and thorough cleaning of all surfaces that come into contact with
processed food is necessary.
• After using the appliance, it is always necessary to clean all parts of food and grease. It
is important to thoroughly clean surfaces from residues, grease and greasy deposits.
• Follow these steps:
- Disassemble (as directed) parts and components that are individually washable either
directly under running hot water or can be immersed in warm water to which a suitable
detergent has been added.
- Thoroughly remove visible food residues from all parts of the machine (food processing
parts).
• Wiping all surfaces with a dry paper towel is a convenient way.
- Immerse individual parts of the appliance in a kitchen sink (or suitable container) with
warm water and a small amount of detergent concentrate. Allow the cleaning solution to
act for a few minutes.
- Subsequent contaminated areas with adequate pressure, but wipe thoroughly with a
soft cleaning sponge and remove any food and grease residue.
- Clean the surfaces of the parts so cleaned with clean warm water using a soft sponge
or cloth.
Repeat this procedure as necessary to remove any detergent residue.
- Finally, dry cleaned and washed surfaces thoroughly with a soft cloth or paper towel or
let them dry.
• Thorough cleaning is important when cleaning equipment (food contact parts and
components), as food residues tend to be subject to putrefaction and thus contaminate
safe food during subsequent processing.
Tabla de contenidos
