Optronis CR450x2 Manual de usuario
CamRecord
CR450x2
CR600x2
CR1000x2
CR4000x2
CR5000x2
Ver. -
User Manual
Ref. 1830-SU-02-G
CR Series Ref. 1830-SU-02-G Page 1
Contents
General 3
Declaration of conformity 3
RoHS compliance 3
Scope of delivery 4
Optronis customer service 7
Safety Instructions 8
Typical System Configuration 9
Quick Start Instructions 10
Nikon F-Mount 10
To mount the Nikon F-Mount lens 10
To unmount the Nikon F-Mount lens 11
C-Mount 12
To mount the C-Mount lens 12
To unmount the C-Mount lens 12
Start of operation 13
Camera 15
Lens Interface 15
Accessories 15
Camera Socket 15
Electrical Interface 16
VGA Connector 16
Power Supply Input / Power Connector 17
Power-LED 17
GigE Connector 17
GigE Communication-LEDs 17
Trigger / Sync Connector (Aux.) 17
External Trigger (Trig In) 18
Trigger Control-LED 18
External Synchronisation Input (Sync In) 18
Synchronisation Output 19
Power Supply 20
Laptop (PC) 20
CamControl Software 21
TimeBench Software 21
Technical Data 22
CR450x2 22
Spectral Response / Transmittance 22
Bayer Pattern 23
CR600x2 24
Spectral Response / Transmittance 24
Bayer Pattern 25
CR1000x2 26
Spectral Response / Transmittance 26
Bayer Pattern 27
CR Series Ref. 1830-SU-02-G Page 2
CR4000x2 28
Spectral Response / Transmittance 28
CR5000x2 30
Spectral Response / Transmittance 30
Bayer Pattern 31
Performance (Examples) 32
CR450x2 32
CR600x2 32
CR1000x2 32
CR4000x2 33
CR5000x2 33
Mechanical Dimensions 34
CR 450x2, CR600x2, CR1000x2, CR4000x2, CR5000x2 34
External Inputs 36
Trigger & Synchronisation input 36
Synchronisation Timing 36
Trigger Timing 37
External Outputs 38
Synchronisation output 38
Synchronisation Timing 38
Focal Length Calculation 40
Focal Length Calculation 40
CR450x2 40
Full Sensor Resolution 40
Reduced Sensor Resolution 40
Distance Washer 42
CR600x2 43
Full Sensor Resolution 43
Reduced Sensor Resolution 43
Distance Washer 45
CR1000x2 46
Full Sensor Resolution 46
Reduced Sensor Resolution 46
Distance Washer 48
CR4000x2 49
Full Sensor Resolution 49
Reduced Sensor Resolution 49
Distance Washer 51
CR5000x2 52
Full Sensor Resolution 52
Reduced Sensor Resolution 52
Distance Washer 54
Illumination 55
General
Declaration of conformity
Manufacturer: Optronis GmbH
Address: Honsellstr. 8, 77694 Kehl, Germany
We certify and declare under our sole responsibility that
the following apparatus
Product: CR450x2, CR600x2, CR1000x2, CR4000x2, CR5000x2
conform with the essential requirements of the EMC
Directive 2004/108/EC, based on the following
specifications applied:
Specifications: EN 61000-6-3 Emission
EN 61000-6-1 Immunity
Kehl, 21.04.2009
Optronis GmbH
Dr. Patrick Summ
Managing Director
RoHS compliance
CamRecord CR series cameras are Pb free manufactured.
CR Series Ref. 1830-SU-02-G Page 3
CR Series Ref. 1830-SU-02-G Page 4
Scope of delivery
CR450x2 CamRecord High-Speed camera
Options: /C: Color sensor (Bayer Pattern)
(IR Cutoff Filter, Specification: 1830-SS-10)
/M: Monochrome sensor
/1GB: 1 GByte Memory
/2GB: 2 GByte Memory
/4GB: 4 GByte Memory
/8GB: 8 GByte Memory
/16GB: 16 GByte Memory
/MS: Multisequence / Multisegment
CR-SDK: Software Development Kit
CR-Labview: Labview Driver
Lens mount: /CM: CMount
/FM: FMount
Power supply: +12Volt / 2,5Amp., 100 .. 240VAC/50-60Hz
External Synchronisation / Trigger Adapter cable
User Manual
CamControl software (CD-ROM)
TimeBench software (CD-ROM) for camerasystems after 03.2010
CR600x2 CamRecord High-Speed camera
Options: /C: Color sensor (Bayer Pattern)
(IR Cutoff Filter, Specification: 1830-SS-10)
/M: Monochrome sensor
/2GB: 2 GByte Memory
/4GB: 4 GByte Memory
/8GB: 8 GByte Memory
/16GB: 16 GByte Memory
/UF: Ultra Format
CR-SDK: Software Development Kit
CR-Labview: Labview Driver
Lens mount: /CM: CMount
/FM: FMount
Power supply: +12Volt / 2,5Amp., 100 .. 240VAC/50-60Hz
External Synchronisation / Trigger Adapter cable
CR Series Ref. 1830-SU-02-G Page 5
User Manual
CamControl software (CD-ROM)
TimeBench software (CD-ROM) for camerasystems after 03.2010
CR1000x2 CamRecord High-Speed camera
Options: /C: Color sensor (Bayer Pattern)
(IR Cutoff Filter, Specification: 1830-SS-10)
/M: Monochrome sensor
/2GB: 2 GByte Memory
/4GB: 4 GByte Memory
/8GB: 8 GByte Memory
/16GB: 16 GByte Memory
/UF: Ultra Format
/US: Ultra Speed
CR-SDK: Software Development Kit
CR-Labview: Labview Driver
Lens mount: /CM: CMount
/FM: FMount
Power supply: +12Volt / 2,5Amp., 100 .. 240VAC/50-60Hz
External Synchronisation / Trigger Adapter cable
User Manual
CamControl software (CD-ROM)
TimeBench software (CD-ROM) for camerasystems after 03.2010
CR5000x2 CamRecord High-Speed camera
Options: /C: Color sensor (Bayer Pattern)
(IR Cutoff Filter, Specification: 1830-SS-10)
/M: Monochrome sensor
/2GB: 2 GByte Memory
/4GB: 4 GByte Memory
/8GB: 8 GByte Memory
/16GB: 16 GByte Memory
/UF: Ultra Format
/US: Ultra Speed
CR-SDK: Software Development Kit
CR-Labview: Labview Driver
CR Series Ref. 1830-SU-02-G Page 6
Lens mount: /CM: CMount
/FM: FMount
Power supply: +12Volt / 2,5Amp., 100 .. 240VAC/50-60Hz
External Synchronisation / Trigger Adapter cable
User Manual
CamControl software (CD-ROM)
TimeBench software (CD-ROM) for camerasystems after 03.2010
CR4000x2 CamRecord High-Speed camera
Options: /C: Color sensor (Bayer Pattern)
(IR Cutoff Filter, Specification: 1830-SS-10)
/M: Monochrome sensor
/2GB: 2 GByte Memory
/4GB: 4 GByte Memory
/8GB: 8 GByte Memory
/UF: Ultra Format
/US: Ultra Speed
CR-SDK: Software Development Kit
CR-Labview: Labview Driver
Lens mount: /CM: CMount
/FM: FMount
Power supply: +12Volt / 2,5Amp., 100 .. 240VAC/50-60Hz
External Synchronisation / Trigger Adapter cable
User Manual
CamControl software (CD-ROM)
TimeBench software (CD-ROM) for camerasystems after 03.2010
CR Series Ref. 1830-SU-02-G Page 7
Optronis customer service
Optronis GmbH
Honsellstrasse 8
77694 Kehl
Tel: +49 (0) 7851 9126 0
Fax: +49 (0) 7851 9126 10
e-mail: [email protected]
For any questions or problems, please do not hesitate to ask our customer
service. Please prepare the following information:
•Name of the device:
(CamRecord CR450x2, CR600x2, CR1000x2, CR4000x2,
CR5000x2)
•Serial-Number:
(see label at the bottom side of the camera)
•Software Version:
(Info-Menu of the CamControl or TimeBench software)
•Short description of the problem
CR Series Ref. 1830-SU-02-G Page 8
Safety Instructions
•Please operate the CamRecord CR cameras from a 110 Volt to
240 Volt (50 Hz to 60 Hz a.c. frequency) power source. Other
voltage levels or frequencies may damage the camera.
•Do not orientate the optical input of the camera to direct sunlight.
•Keep the camera free protected from dirt, dust, grease and water.
•Make sure that all the connecting cables are in good condition and
that they are well mounted to their sockets.
•Please use the socket of the camera and connect it to a sufficiently
stable basis.
•Avoid strong system shocks and vibrations during transport or
during operation.
•Always unplug the camera before cleaning it. Do not use cleaning
liquids or sprays. Instead, use a dry and soft duster.
•For any further questions please do not hesitate to contact
Optronis GmbH, especially when the camera do not work as it is
described in the user manual.
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Cámara digital de Optronis
Optronis
Optronis CP70-12-M/C-188 Manual de usuario
Optronis
Optronis CP70-004-M/C-19000 Manual de usuario
Optronis
Optronis CamRecord CR Series Manual de usuario
Optronis
Optronis CP80-4-M/C-500 Manual de usuario
Optronis
Optronis CP70-16-M/C-148 Manual de usuario
Optronis
Optronis CR-S3500 Manual de usuario
Optronis
Optronis CamPerform CoaxPress CP70-1-M-1000 Manual de usuario
Optronis
Optronis CamPerform CP80-25-M Manual de usuario
Optronis
Optronis CP80-3-M/C-540 Manual de usuario
Optronis
Optronis CP70-2-M Manual de usuario
