Opticis FIBER-DVI-110TR Manual de usuario

FIBER-DVI-110TR

2 KM 1 core LC fiber extender with EDID management

Version: V2016.001

User Manual

Contents

1. Production ................................................................................................................3

2. Features ....................................................................................................................3

3. Specification .............................................................................................................3

4. Packing ..................................................................................................................... 3

5. Connection Diagram ................................................................................................ 4

6. System installation requirements ........................................................................... 4

6.1 Hardware ..................................................................................................................... 5

6.2 Software ...................................................................................................................... 5

6.3 AC/DC Suggestions ...................................................................................................... 5

7. Operation and instruction ....................................................................................... 4

8 . Commen issues and attentions .............................................................................. 5

8.1 Commen issues and maintenance .............................................................................. 5

8.2 Attention ......................................................................................................................6

9. After-sales ................................................................................................................ 6

9.1 Warranty ......................................................................................................................6

9.2 Lmitation ..................................................................................................................... 6

10. Version Information ...............................................................................................6

1. Introduction

FIBER-DVI-410TR is a 4 core LC connector DVI Fiber Optic Extender, with single model fiber

cable can transmit to a distance of 10km, resolution can reach WUXGA(1920*1200@60Hz), the

bandwidth is 10Gbps. No loses, compression, latency during the whole transmission. With

optoelectronic multiplex technology, this equipment consists of two parts: Transmitter and

receiver. Transmitter using the V-EDID technology, it can supports EDID learning and coding to

reach the best display effect. With EDID leaning technology in the transmitter, it can adopt

different resolution display systems, it help users to make the project neat, convenient and

stable.

2. Features

Transmits the DVI signal to 10 km with 4 core single fiber cable.

The max resolution can up to 4K30Hz

No loses, compression and latency during the transmission

Supports EDID learning and coding

Support 7×24h working

Support DVI1.0 protocol and HDMI1.4

3. Specification

4. Packing

FIBER-DVI-410TR(1 transmitter and 1 receiver)

Pair

DC 5V1A power adapter

Pcs

Type

FIBER-DVI-410TR

FIBER-DVI-210TR

FIBER-DVI-110TR

Description

DVI 4 cores SM 10km

DVI 2 cores SM 10km

DVI 1 core SM 2 km

Interface

Distance

10KM(Single model)

2KM(Single model)

Resolution

1080p60Hz

4K30Hz

EDID

Supports

Protocol

DVI1.0

DVI1.0, HDMI1.4

Bandwidth

2.5Gbps

10Gbps

Color Space

RGB444/ YUV444/ YUV422, supports x.v.Color extension and standard

Power Supply

110---260V 50/60Hz AC Input，5V 1A Output

Dimension

15mm×39mm×66mm（H/W/L）

weight

190g(A pair)

Humidity

10%-90%

Working

-10℃- 50℃

Storage

-25℃- 55℃

5. Connection diagram

6. System installation requirements

6.1 Hardware

Devices need to have the DVI interface and support DVI resolution

6.2 Software

There is no special requests as long as the DVI image controller has been well installed.

6.3 AC/DC Suggestions

Transmitter has the power protection system, users can use other adapters which can

provide 5V power supply, for the receiver should use the adapter which come together in

the packing.

7. Operation and instruction

Note: Please follow the following steps, otherwise it may not working.

Step 1:

EDID learning/ Coding: Please power on the display first, then plug the transmitter to

the display and power on with the 5V1A power adapter(Note: Need to get the

transmitter connected with the display first, then power on the transmitter), then the

LED indicator on the opposite side will light up in red, and the LED indicator on the up

side will light up in blue and last for 8-10 seconds and off, it means the EDID has

learned successfully; If the indicator after lighting up 8-10 second, and flicking for 3

times then off, it means the EDID learning was failed.

Note: If need to exchange the display, please remember to repeat the step 1

Step 2:

Plug the transmitter to DVI port of the input sources. Make sure to power the

transmitter and the red LED indicator is lighting up.

Note: Please don’t use other power adapters to have the perfect performance.

Step 3:

Please power on the receiver with 5V adapter and see the red LED indicator is

lighting up

Step 4:

Get the receiver well connected with DVI port on the display

Step 5:

Using the single model fiber cable well connect the receiver and transmitter

Step 6:

Turn on or power on the sources

Step 7:

Last step, if users using the Windows system, only need to set up the best resolution

which the display can support.

Note: If users using the IOS system, couldn’t see the original image after connection,

users have to repeat Step 1 and step 2 to set up.

8. Common issues and attentions

8.1 Common issues and maintenance

(1) Only black on the display?

Make sure all the power supply is tight and stable. Meanwhile, make sure the red

LED indicator light up.

Follow the Step 1 to make the EDID learning or coding successfully.

Make sure the extender connected with the DVI display tightly.

Make sure the receiver is connected with the display and the transmitter is well

connected with the input source.

Check the power supply for the sources and display is working good.

Try to plug-out or plug-in the extender again, or disconnect the power supply for a

few seconds and power on again.

(2) The image on the display is out of shape or noisy

Check the resolution is suitable or not.

Make sure the resolution is under 4K30Hz.

Disconnect the power supply and power on again or the DVI cable and restart the

extender

8.2 Attention

Please well protect the power cord, fiber cable, in case of the cable damage cause the

problem

Avoid any liquid, electronic or dusty staff get into the equipment.

Working temperature should between -10 ℃-50 ℃, and make sure the dry and cool

place

Try not to plug-in/out the equipment when power on

9. After-Sales

9.1 Warranty Information

The Company warrants that the process and materials of the product are not defective under

normal use and service for 3 (3) years following the date of purchase from the Company or its

authorized distributors.

If the product does not work within the guaranteed warranty period, the company will choose

and pay for the repair of the defective product or component, the delivery of the equivalent

product or component to the user for replacement of the defective item, or refund the

payment which users have made.

The replaced product will become the property of the Company.

The replacement product could be new or repaired.

Whichever is longer, any replacement or repaired of the product or component is for a period

of ninety (90) days or the remaining period of the initial warranty. The Company shall not be

responsible for any software, firmware, information, or memory data contained in, stored in,

or integrated with the product repaired by the customer's return, whether or not during the

warranty period.

9.2 Warranty limitations and exceptions

Except above limited warranty, if the product is damaged by over usage, incorrectly use, ignore,

accident, unusual physical pressure or voltage, unauthorized modification, alteration or

services rendered by someone other than the Company or its authorized agent, the company

will not have to bear additional obligations. Except using the product properly in the proper

application or normal usage

10. Version Information

Description of version（Document number：FIBER-DVI-410TR）

Date

Version number

Description

Dec 2016

V1.01.01

First version

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Extensor de opticis

opticis

opticis M5-2A2-TR Manual de usuario

opticis

opticis DPFX-300-TR Manual de usuario

opticis

opticis HDFX-700-TR Manual de usuario

opticis

opticis AVFX-100-TR Manual de usuario

opticis

opticis Stretch DVI M1-201SA-TR Manual de usuario

opticis

opticis HDFX-100-TR Manual de usuario

opticis

opticis KVMX-200-TR Manual de usuario

opticis

opticis HDFX-500-TR Manual de usuario

opticis

opticis DPFX-250-TR Manual de usuario

opticis

opticis IPKVM-310-ED Manual de usuario

opticis

opticis HDWX-100-TR Manual de usuario

opticis

opticis M5-2C2 Manual de usuario

opticis

opticis HDCX-100-TR Manual de usuario

opticis

opticis M5-2C2-TR Manual de usuario

opticis

opticis DPFX-1F14-TR Manual de usuario

opticis

opticis HDFX-150-TR Manual de usuario

opticis

opticis M5-1003 Manual de usuario

opticis

opticis HDFX-100-TR Manual de usuario

opticis

opticis AVFX-100TR Manual de usuario

opticis

opticis Stretch DVI DDFX-100-TR Manual de usuario

opticis

opticis IPKVM-500-ED Manual de usuario

opticis

opticis DPFX-200-TR Manual de usuario

opticis

opticis DPFX-700-TR Manual de usuario

opticis

opticis Stretch DisplayPort DPC-MP14-TR Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario

opticis FIBER-DVI-110TR Manual de usuario

Manuales populares de Extensor de otras marcas