Optex OVS-6000 Manual de usuario

Select a sensor mounting location based on application (Notication or Dwell Time)

OPTEX OVS-6000 Quick Setup Guide

For detailed information, please refer to the installation manual supplied with each sensor.

Note: Mount to the side if you don’t have vehicle clearance of the sensor (see above right); ensure vehicles will not strike the sensor.

The OVS-6000 utilizes an active infrared transmitter and photoelectric

receiver located in the rectangular sensor head. This Quick Setup Guide

will answer the most common installation questions, including: Mounting

location, aiming the sensor head to achieve proper detection, self-learning,

and programming.

After choosing the mounting location, open the box and remove

the sensor.

View the Transmitter, Receiver and Dipswitches. See below for detail of

dipswitch settings.

Notication (detecting the approach of a vehicle) applications, vehicle clearance validation

Dwell Time (detecting the presence of a stopped vehicle) applications, vehicle clearance validation

sensor 3-4’ sensor 3- 4’

sensor 3 - 4’ sensor 3 - 4’

Note that the dipswitches are located behind the black cover, which

can be easily removed by pulling the cover forward.

(over)

* Aim detector beams in front of tube machine

Note: Mount to the side if you don’t have vehicle clearance of the sensor (see above right); ensure vehicles will not strike the sensor.

18730 Wilmington Ave, Unit 100

Rancho Dominguez, CA 90220

Ph 310 214-8644

Fax 310 898-1098

Toll free 800 877-6656

www.optex-america.com

OPTEX Technologies Inc.

(East Coast Ofce)

8510 McAlpine Park Dr.

Suite 108

Charlotte, NC 28211

Choose Sensor Settings

Test and Complete Installation

3 and 4 - Frequency

Set 3 and 4 Down (unless using 2 or more detectors with overlapping detec-

tion patterns next to each other; then, adjust to different frequencies).

8 - Delay

8 Down (shown), Notication (Vehicle Approaching): no delay.

8 Up requires 2 or more beams broken within a 3-second period for Dwell

time (Vehicle Stationary).

7 - LED Indicator

7 Down (shown), LED on, turns off with detection.

7 Up, LED stays on with power.

1 and 2 - Presence (Vehicle) Detection Timer

Notication (Vehicle Approaching): 1 and 2 Down (shown).

Dwell Time (Vehicle Stationary): 1 Up, 2 Down

5 and 6 - Adjust Detection Height Area

9 to 15 feet: 5 Up, 6 Down (shown).

12 to 24 feet: 5 Down, 6 Up.

Mount Sensor and Adjust the Detection Pattern

* Apply power - no vehicles in the detection pattern for a 10-second learning time.

When mounted on the ceiling, the sensor head is aimed in this direction.

Loosen keeper nut and adjust sensor head so that it aims at the ground

above the driver’s side of the vehicle.

The sensor projects narrow detection beams towards the ground.

The detection area contains 4 beams, as displayed in image at

right. The IR Locator (optional) will give you the ability to locate the

individual beams. When the LEDs light up on the IR Locator, you

are within the beam area. The IR Locator Adjustment Tool can be

purchased from OPTEX. Call 800-877-6656 to learn more.

IR Locator (optional)

Tabla de contenidos

Otros manuales de Sensor de seguridad de Optex

Optex

Optex OA-6500S T Manual de usuario

Optex

Optex WX Infinity Series Manual de usuario

Optex

Optex VX Infinity Series Manual de usuario

Optex

Optex OVS-50TNR Manual de usuario

Optex

Optex CX-702 MKII Manual de usuario

Optex

Optex Redwall LRP 180QH Instrucciones de montaje

Optex

Optex OML-ST Manual de usuario

Optex

Optex inSight INS-HX-80N Manual de usuario

Optex

Optex PROWAVE AIR-SLIDE 2 Manual de usuario

Optex

Optex RXC-RST Manual de usuario

Optex

Optex fit Series Manual de usuario

Optex

Optex FitLink Manual de usuario

Optex

Optex FX-50QZ Manual de usuario

Optex

Optex OVS-01GT Manual de usuario

Optex

Optex LX-402 Manual de usuario

Optex

Optex VX SHIELD Series Manual de usuario

Optex

Optex Fiber SenSys Laser Defender LD308SH Instrucciones de instalación y funcionamiento

Optex

Optex CDX Series Manual de usuario

Optex

Optex PRO SWING OA-EDGE1 T Manual de usuario

Optex

Optex VX-402 Manual de usuario

Optex

Optex OA-FUNXION Manual de usuario

Optex

Optex REDSCAN Series Manual de usuario

Optex

Optex AX-100TFR Series Manual de usuario

Optex

Optex OVS-50TNR Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario