Onvif IPSD30X2WI Manual de usuario
USER’S MANUAL
30x Full-HD IR Speed Dome Network Camera:
IPSD30X2WI
Please read this manual thoroughly before use and keep it handy for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EX-
POSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY
METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER
OPENNINGS ON THE EQUIPMENT.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is in-
tended to alert the user to the presence of dangerous voltage within the prod-
uct’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
2
FCC COMPLIANCE STATEMENT
FCC INFORMATION: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the in-
struction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful in-
terference in which case the user will be required to correct the interference
at their own expense.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numrique de la classe A est conforme la norme NMB-003 du
Canada.
CE COMPLIANCE STATEMENT
WARNING
This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
3
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings; Install in accordance with the manufacturer’s in-
structions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug; A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety, If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is used.
Use caution when moving the cart/apparatus combination to avoid in-
jury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is re-
quired when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or ob-
jects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. CAUTION −THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED
SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING IN-
STRUCTIONS UNLESS YOU QRE QUALIFIED TO DO SO.
16. Use satisfies clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power
source only.
17. ITE is to be connected only to PoE networks without routing to the outside plant.
4
Contents
1 Introduction 6
1.1 Components .................................... 6
1.2 KeyFeatures .................................... 7
2 Installation 8
2.1 Installation ..................................... 8
2.1.1 Installation - Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1.2 Installation - Ceiling Mount . . . . . . . . . . . . . . . . . . . . . . . . 10
2.2 Basic Configuration of Camera System . . . . . . . . . . . . . . . . . . . . . 11
2.3 Micro-SD Card Insertion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4 Connections .................................... 13
2.4.1 Network Connection & IP assignment . . . . . . . . . . . . . . . . . . 14
3 Operation 15
3.1 Accessfromabrowser .............................. 15
3.2 Access from the internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.3 Setting the admin password over a secure connection . . . . . . . . . . . . . 16
3.4 LiveViewPage................................... 17
3.5 Playback ...................................... 19
3.6 NetworkCameraSetup .............................. 21
3.6.1 Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.6.2 LiveView .................................. 25
3.6.3 Video&Image ............................... 26
3.6.4 Audio .................................... 35
3.6.5 Event .................................... 37
3.6.6 DomeConfiguration ............................ 60
3.6.7 System ................................... 69
3.7 Help......................................... 90
3.8 Resetting to the factory default settings . . . . . . . . . . . . . . . . . . . . . 91
A Appendix 92
A.1 Troubleshooting................................... 92
A.2 AlarmConnection ................................. 93
A.3 Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
A.4 ProductSpecification................................ 94
A.5 System Requirement for Web Browser . . . . . . . . . . . . . . . . . . . . . . 96
A.6 Minimum System Requirements for ATVision IP Software . . . . . . . . . . . 96
A.7 General Performance Considerations . . . . . . . . . . . . . . . . . . . . . . 96
5
1 Introduction
The network camera supports the network service for a sensor image with progressive scan,
which can be monitored on a real-time screen regardless of distances and locations. By us-
ing its dedicated program, many users are able to have an access to the network camera
at once or a single user can monitor various network cameras at the same time. It also
enables users to play, store and retrieve a monitoring image by using a PC. All the settings
and real-time monitoring screens are also provided through an access to the web.
The network camera is fully featured for security surveillance and remote monitoring needs.
It is based on the DSP compression chip, and makes it available on the network as real-time,
full frame rate Motion JPEG and H.264 video streams.
1.1 Components
This system comes with the following components;
Dome Camera ························ 1
Installation Guide/CD ························ 1
RJ-45 Coupler ························ 1
2P screw type Connector ························ 1
5P screw type Connector ························ 1
Install Adaptor ························ 1
6
1.2 Key Features
•Brilliant video quality
The network camera offers the highly efficient H.264 video compression, which drasti-
cally reduces bandwidth and storage requirements without compromising image qual-
ity. Motion JPEG is also supported for increased flexibility.
•Dual or Triple Streams
The network camera can deliver dual or triple video streams simultaneously at full
frame rate in all resolutions up to Full-HD (1920 x 1080p) using Motion H.264 and
JPEG. This means that several video streams can be configured with different com-
pression formats, resolutions and frame rates for different needs.
•Image setting adjustment
The network camera also enables users to adjust image settings such as contrast,
brightness and saturation to improve images before encoding takes place.
•Intelligent video capabilities
The network camera includes intelligent capabilities such as VCA(Video Content Anal-
ysis). The network camera’s external inputs and outputs can be connected to devices
such as sensors and relays, enabling the system to react to alarms and activate lights
or open/close doors.
•Improved Security
The network camera logs all user access, and lists currently connected users. Also, its
full frame rate video can be provided over HTTPS.
•Built-in Synchronized IR LED & Fixed IR LED
The camera is equipped with two built-in IR LED’s, fixed one for wide view and zoom
synchronized adjustable one for distant view.
•PoE (Power over Ethernet)
This network camera can be powered through PoE, which simplifies installation since
only one cable is needed for carrying power, as well as video controls.
•ONVIF Certificate
This is a global interface standard that makes it easier for end users, integrators, con-
sultants, and manufacturers to take advantage of the possibilities offered by network
video technology. ONVIF enables interoperability between different vendor products,
increased flexibility, reduced cost, and future-proof systems.
•Micro-SD Recording support
The network camera also supports a Micro-SD memory slot for local recording with
removable storage.
•Audio support
The network camera also supports two-way audio.
7
2 Installation
2.1 Installation
You need one optional mount kit of the wall mount and the ceiling mount to install.
The wall or ceiling mount must be attached to a structural object such as hard wood, con-
crete that will support the weight of the mount and dome camera.
The use of a solid backboard is recommended when attaching to gypsum walls.
1. Remove the Protection pad and the tape from attached the dome camera.
2. Attach the mounting base to wall using the supplied M8 tapping screw and plastic
bushing. (Ceiling using the supplied M6 tapping screw and bushing)
3. Wind the both thread of the pipe end with Teflon tape about 20 times for sealing. Then
use a silicone rubber sealant to seal the area where the wall (ceiling) mount and the
pipe meet.
4. Place a bead of silicone sealant around the wall and ceiling mount mounting flange,
press it to the surface and line up the flange hole with drilled holes.
CAUTION 1: A silicone rubber sealant must be applied to seal the housing and cable-end
to secure waterproofing.
CAUTION 2: When installing, a bracket must be applied.
8
2.1.1 Installation - Wall Mount
The wall mounting plate must be attached to a structural object such as concrete that will
support the weight of the mount and Dome Camera.
1. Select a suitable mounting location and verify there is sufficient cable to reach the
middle of the Wall Mount.
2. Mark and drill mounting holes on the surface using the Wall Mount Flange.
3. Pull out cables required to connect to the dome camera from the wall.
4. Set and fix wall mount bracket using plastic anchors and M8x35 screws.
5. Open the access plate and pull out cables through rectangular access hole of the wall
mount bracket.
6. Attach the 1.5 inch adapter to wall mount bracket and fix it using set screw.
7. Attach the camera’s safety wire to the wall mount bracket and organize cables.
8. Close the access plate of the wall mount bracket.
9. Push in and turn clockwise the camera into the adapter, and fix it using set screw of
the adapter.
9
2.1.2 Installation - Ceiling Mount
The ceiling mounting plate must be attached to a structural object such as concrete that will
support the weight of the mount and Dome Camera.
1Select a suitable mounting location
and verify there is sufficient cable to
connect with cables from the housing.
2Mark and drill mounting holes on
the surface using the ceiling mount
bracket.
3Pull out cables required to connect
to the dome camera from the ceiling.
4Attach the ceiling mount bracket
using plastic anchors and screws.
5Attach 1.5 inch adapter to the
pipe and fix it using set screw of the
adapter.
6Pull out camera cables through
the pipe and attach the camera to
adapter and fix them using set screw
of the adapter.
7Attach the housing’s safety wire to
the ceiling mount’s M6x35 tapping
screw.
8Join every connectors and organize
cables.
9Lock hexagonal nut of the ceiling
mount bracket to fix camera attached
pipe and ceiling mount bracket.
10
Tabla de contenidos
Otros manuales de Cámara de seguridad de Onvif
Onvif
Onvif IPID-TP2MPIR50L2812-W Manual de usuario
Onvif
Onvif CM260IR-IP Manual de usuario
Onvif
Onvif IPPTZ-EL2MPL30X-AT Manual de usuario
Onvif
Onvif IPSDV12XW Manual de usuario
Onvif
Onvif V972D Manual de usuario
Onvif
Onvif CDI12H360VIW Manual de usuario
Onvif
Onvif IPVD3TI Manual de usuario
Onvif
Onvif IPVD3RWI Manual de usuario
Onvif
Onvif KNC-p3BR28V12IR Guía del usuario
Onvif
Onvif CDIH100 Manual de usuario
