One Forall URC-44 Manual de usuario

Retain For Future Reference

USER GUIDE & CODE BOOK

Universal Remote

URC-7541/44

702246

URC-7544

URC-7541

ZAPPER

ONE FOR ALL 4 DIGITAL

ONE FOR ALL 4

DigitalDigital

Table of Contents

About Your ONE FOR ALL 4 Digital

Your ONE FOR ALL 4 Digital Package contains:

Your ONE FOR ALL 4 Digital Remote

Your ONE FOR ALL 4 Digital Manual

Your manual is divided into two parts: set-up instructions and device

codes. You may need this guide again in the future, so please be

sure to keep it.

Your ONE FOR ALL 4 Digital needs 2 new “AA/LR6” alkaline batteries.

Your ONE FOR ALL 4 Digital can operate any combination of the

following 4 devices: a Television, a Video Recorder or DVD Player and a

Satellite Receiver or Cable Converter. The ONE FOR ALL 4 Digital is

specially designed to provide full functionality of your Digital Satellite

System (BskyB, ONdigital, Foxtel, Multichoice etc.). Of course the ONE

FOR ALL 4 Digital can operate the basic functions of any satellite and

cable converter as well. To find out how to install the ONE FOR ALL 4

Digital for your devices please refer to the pages within.

QUICK SET-UP

QUICK SEARCH

INSTALLING THE BATTERIES

THE KEYPAD

INSTALLATION

Setting up your Digital Satellite System 7

Setting up your other devices 8

The Search Method 9

SET-UP CODES

Quick Code Reference 11

Televisions 11

Video Recorders 17

Satellite Receivers 20

Cable Converters 23

DVD Players 23

ADVANCED FEATURES

Scan 24

Volume Punch Through 24

Menu 25

Colour and Brightness 25

Sleeptimer 26

Using the AUX Key 28

Changing the mode of a Device Key 29

TROUBLE-SHOOTING

Helpful Hints (Problem and Solution) 30

Customer Service 31

WWW.ONEFORALL.COM 1

Device

Keys

Channel(-)

Channel(+)

Power

Number

Keys

Magic

Rewind/Text On

Exit

Play/Text Off

Custom

Satellite Keys

URC-7541/44

Menu Left

Stop/Green

SP/LP/Red

Menu Down

Volume Up

Mute

Menu Right

Menu Up

Volume Down

Fast Forward/

Expand

Pause/Hold

Auto/Blue

Record/Yellow

Quick Set-Up

The instructions below and on the next page can be

used to quickly install your new ONE FOR ALL.

You can use the Quick Set-Up below with the codes

listed on pages 11-23. If this doesn’t work, try the

Quick Search on the next page. The Quick Search can

also be used even if your brand is not listed at all.

Make sure you install the batteries in your ONE

FOR ALL before following the instructions below.

Make sure your device is switched on (not in

standby).

Press device key:

Press and hold until the

device key blinks twice (the

device key will blink once and

then twice). Then release.

Enter

( -digit code). See pages 11-

23. The device key will blink

twice.

Aim remote at your device and

press

(or PLAY).

or or

____

NOTES:

- To set up your Digital Satellite System

please enter the four-digit code found at

the bottom of the adhesive overlay next to

the brand name.

- The instructions above are a “Quick” set-up

guide. For further explanation, please refer

to the pages within.

- Make sure you write your Set-Up codes in

the boxes provided on page 11 and inside

the battery compartment for easy future

reference.

Quick Search

Aim your ONE FOR ALL at your

device and press device key:

Press and hold

until the device key blinks

twice (the light will blink once

then twice).

Press

Slowly alternate between the

device key ( ) and

until your device turns off.

When your device turns off,

press . The device key will

blink twice. Your device is Set

Up.

NOTES:

- During step 4, you may have to press these

keys many times, so please be patient.

- If your Video’s original remote control does

not have a power key, press PLAY instead of

POWER during step 4. Make sure a cassette

is inserted.

ie:

or or

Make sure your device is switched on (not in

standby).

Make sure you aim your ONE FOR ALL at your

device during “Quick Search”.

4WWW.ONEFORALL.COM

The Keypad

Installing the Batteries

Important notes:

-On the inside of the battery compartment door you will find a

label on which to write your Set-Up codes after your ONE FOR

ALL 4 Digital is set up for your device. Please write down your

codes for easy, future reference.

-Do not use rechargeable batteries.

-In order to avoid having to reprogram your ONE FOR ALL 4

Digital after you remove the batteries, you will need to insert

new batteries within 5 minutes.

Your ONE FOR ALL 4 Digital needs 2 new “AA/LR6” alkaline batteries.

Remove the battery cover from the back of

your ONE FOR ALL 4 Digital by pressing down

on the tab.

Match the batteries to the + and - marks inside

the battery case, then insert the batteries.

Press the battery cover back into place.

Function

MAGIC Key

The MAGIC key is used to set up your ONE FOR ALL 4

Digital and to access special functions.

Menu Key

The MENU key controls the same function as it did on

your original remote.

Power Key

The POWER key controls the same function as it did

on your original remote.

WWW.ONEFORALL.COM 5

Function

Device Keys

The TV, VCR, SAT and AUX keys select the home

entertainment device to be controlled. For example

pressing the TV key allows the remote to control the

functions of your Television, after pressing VCR you

can operate your Video Recorder or DVD Player and

the SAT key operates your Satellite Receiver or Cable

Converter. The AUX key only operates a second

Television, Video Recorder or DVD Player, Satellite

Receiver or Cable Converter. During operation of the

ONE FOR ALL the device key will light up to indicate

the mode you are using.

Channel, Volume Keys

The CHANNEL and VOLUME keys control the two

most frequently used functions of your device. They

operate just as those on your original remote.

Mute Key

The MUTE key operates the same function as it did

on your orginal remote control. It is also used to

activate the SCAN feature (see page 24).

Directional Keys

These keys will allow you to navigate

through the MENU of your device.

Exit

The EXIT key will exit the MENU.

The OK key will confirm your choice in

MENU operation.

Number Keys

The Number keys (0-9, 10, AV(20)) provide direct

access functions just like your original remote, such

as channel selection. If your original remote uses

one/two digit input switching (-/-- symbol), this

function can be obtained by pressing the -/-- key,

which is the same as the 10 key. If your original

remote has a 20 key, this function can also be found

under the AV key.

Video Recorder Keys

After pressing the VCR key, the Video Recorder keys

operate the functions of your Video Recorder. To

prevent accidental recording, the RECORD key must

be pressed twice to start recording.

The SP/LP key controls the tape speed

function, the AUTO key controls the auto tracking

function just like on your original remote.

The Keypad

-/---/--

EXIT

vol

MUTE

EXIT

SP/LP AUTO

MUTE

Function

Teletext Keys

After pressing the TV key, the top row of the VCR keys

are used to operate the main teletext functions. The

symbols below the keys are for teletext. The text keys are

used to access the teletext functions of your Television.

Of course, your Television must have teletext capability.

TEXT ON Puts the Television in the teletext mode.

TEXT ON/OFF Switches the Television back to regular viewing mode.

On some Televisions, this may be done by pressing the

TEXT key several times.

HOLD/STOP Stops changing pages.

EXPAND Shows the top half of the teletext page in larger

letters. By pressing again, you can see the bottom half

of the teletext page enlarged.

To return to regular teletext viewing, press the

EXPAND key again, or press the TEXT key, depending

on your television.

After pressing the TV key, the bottom row of the Video

Recorder keys marked red, green, yellow and blue, allow

you to access the fastext functions of your television.

Again, your television must have fastext capability to

operate these functions. If on your original remote

control these keys are used for MENU functions, the ONE

FOR All Fastext keys may operate the same.

Custom Satellite Keys:

These special keys are designed to be used with

your Digital Satellite System.

Inside your manual you will find a package

containing several adhesive overlays which will

customize these keys. Open the package and

locate the correct overlay referring to your brand.

Set up your Digital Satellite System following the

instructions on page 7.

In addition, when in TV mode, the top row

of keys will provide you with the following

functions (if available on the original

remote); from left to right: White, Purple,

Mix and 16:9.

6WWW.ONEFORALL.COM

The Keypad

(red)

(blue)

(yellow)

(green)

Important note: For a more detailed explanation of teletext and fastext,

please refer to the manual of your Television. Remember, different

Televisions control teletext and fastext features in

different ways. Not all of the teletext functions may be available for your

particular model.

Setting up your Digital Satellite

System

To set up the ONE FOR ALL 4 Digital for your Digital Satellite

System, follow the instructions below.

Inside this manual you will find a package

containing several adhesive overlays.

Open the package and locate the correct overlay

referring to your brand. Make sure your Digital

Satellite System is switched on.

Press and release the SAT key.

Press and hold down the MAGIC key until the

device key blinks twice (the device key will blink

once, then twice).

Enter the four-digit SAT code which you will

find on the overlay corresponding to your brand.

The device key will blink twice.

Now aim your ONE FOR ALL 4 Digital at your

Digital Satellite System and press POWER. If your

device switches off, your ONE FOR ALL 4 Digital

should be ready to run your Digital Satellite

System.

Turn your device back on and try all the remote’s functions.

Write your code in the four boxes provided in the battery

compartment and on page 11 for easy future reference.

The ONE FOR ALL 4 Digital should now operate your Digital

Satellite System.

- Remove the temporary paper overlay over the eight keys at the

bottom of the remote.

- Take the adhesive overlay corresponding to your brand.

- Peel off the transparent protective cover from the front.

- Peel off the backing sheet.

- Stick the overlay in its place over the eight keys at the bottom

of the remote.

Installation

WWW.ONEFORALL.COM 7

tv guide box office services interactive

backup i help

SKY

S0847BskyB

4____

Example

8WWW.ONEFORALL.COM

Setting Up Your Other Devices

To set up the ONE FOR ALL 4 Digital for your Television, Video

Recorder or DVD Player, Satellite Receiver or Cable Converter, follow

the instructions below.

Example: to set up the ONE FOR ALL for your TV:

Find your Television code in the

Set-Up Code section (starting on page 11). Codes

are listed by brand name. The most popular code

is listed first. Make sure your Television is

switched on (not in standby).

Press and release your ONE FOR ALL 4 Digital’s TV

key.

Press and hold down the MAGIC key until the

device key blinks twice (the device key will blink

once, then twice).

Enter your four-digit TV code using the number

keys. The device key will blink twice.

Now, aim the ONE FOR ALL 4 Digital at your

Television and press POWER. If your Television

switches off, your ONE FOR ALL 4 Digital should

be ready to run your Television.

If your device (television) does not respond to the code

entered, follow steps 1-5 with each code listed for your

brand. If none of the codes listed for your brand operate

your device (television), or if your brand is not listed at

all, try the search method described on page 9.

Write your code in the four boxes provided in the battery

compartment and on page 11 for easy future reference.

ONE FOR ALL

Acura

Admiral

Adyson

Agazi

AGB

Agef

Aiko

0009

0087, 0093, 0363, 041

0217, 0216

0264

0516

0087

0216, 0009, 0037, 0

0037, 0274

0361, 0208, 0371,

Installation

Important notes:

- Some codes are quite similar. If your device does not respond or is not

functioning properly with one of the codes, try another code listed under

your brand.

- For VCR setup: If your VCR’s original remote control does not have a

POWER key, press PLAY instead of POWER during step 5.

- Remember to press the correct device mode key before operating your

device. Only one device can be assigned to each device mode key. If your

original remote control operates more than one device, you need to set up

each device separately.

4____

To set up for a second TV, VCR/DVD or SAT/CBL (See Changing the

Mode of a Device Key, Page 29).

(*) To use the AUX key (see page 28).

Devices can be found under the following keys:

Television Video Recorder/DVD

Satellite Receiver /

Cable Converter

(*) Television /

(*) Video Recorder /

(*) Satellite Receiver/

Cable Converter

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Control remoto universal de One Forall

One Forall

One Forall SAMSUNG URC-4910 Manual de usuario

One Forall

One Forall URC-7800 Cinema 7+ Manual de usuario

One Forall

One Forall Easy 4 Manual de usuario

One Forall

One Forall URC-9966 Manual de usuario

One Forall

One Forall URC-3710 Manual de usuario

One Forall

One Forall URC-1625 Manual de usuario

One Forall

One Forall URC-7930 Manual de usuario

One Forall

One Forall URC-3445 Guía del administrador

One Forall

One Forall URC-4220 Manual de instalación y operación

One Forall

One Forall ZAPPER URC-6010 Manual de usuario

One Forall

One Forall URC-7780 Manual de usuario

One Forall

One Forall BIG EASY URC-2585 Manual de usuario

One Forall

One Forall Universal remote Manual de usuario

One Forall

One Forall KAMELEON URC-8308 Manual de usuario

One Forall

One Forall URC-7930 Manual de usuario

One Forall

One Forall Zapper URC-6512 Manual de usuario

One Forall

One Forall KAMELEON 8 Manual de usuario

One Forall

One Forall OFA Kameleon URC-6690 Manual de usuario

One Forall

One Forall 3 Zapper Manual de usuario

One Forall

One Forall URC-7711 Manual de usuario

One Forall

One Forall URC-7540 Manual de usuario

One Forall

One Forall iLifeTV Manual de usuario

One Forall

One Forall URC-4021 Manual de usuario

One Forall

One Forall URC 4880 Manual de usuario

Manuales populares de Control remoto universal de otras marcas

Pronto

Pronto Peel Manual de usuario

GE 24929 Manual de usuario

Radio Shack

Radio Shack Wireless Remote Control System Manual de usuario

AUVIO

AUVIO Universal Home Theater Remote Manual de usuario

Philips

Philips Icon SRU4106 Manual de usuario

THOMSON

THOMSON ROC4309 Manual de usuario

Philips

Philips pm625S Manual de usuario

GE RM94931 Manual de usuario

RCA

RCA RCU600WMS - Universal Remote Control Manual de usuario

Blackweb

Blackweb BWB17AV002 Manual de usuario

Marmitek

Marmitek DoorGuard 300 Manual de usuario

Chunghop

Chunghop RM-L618 Manual de usuario

GE RM24965 Manual de usuario

Anderic

Anderic KTN828 Manual de usuario

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manual de usuario

Medion

Medion E74023 Manual de usuario

intensity

intensity RM02A Manual de usuario

GE RM24950 Manual de usuario