Omron CS1W-AD041-V1 Manual de usuario

OPERATION MANUAL

Cat. No. W345-E1-08

SYSMAC CS/CJ Series

CS1W-AD041-V1/AD081-V1/AD161

CS1W-DA041/DA08V/DA08C

CS1W-MAD44

CJ1W-AD041-V1/AD081-V1

CJ1W-DA021/DA041/DA08V/DA08C

CJ1W-MAD42

Analog I/O Units

SYSMAC CS/CJ Series

CS1W-AD041-V1/AD081-V1/AD161

CS1W-DA041/DA08V/DA08C

CS1W-MAD44

CJ1W-AD041-V1/AD081-V1

CJ1W-DA021/DA041/DA08V/DA08C

CJ1W-MAD42

Analog I/O Units

Operation Manual

Revised July 2005

Notice:

OMRON products are manufactured for use according to proper procedures by a qualified operator

and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed

the information provided with them. Failure to heed precautions can result in injury to people or dam-

age to property.

!DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. Additionally, there may be severe property damage.

!WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury. Additionally, there may be severe property damage.

!Caution Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to

an OMRON product, regardless of whether or not it appears in the proper name of the product.

The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means

“word” and is abbreviated “Wd” in documentation in this sense.

The abbreviation “PLC” means Programmable Controller. “PC” is used, however, in some Program-

ming Device displays to mean Programmable Controller.

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of

information.

Note Indicates information of particular interest for efficient and convenient opera-

tion of the product.

1,2,3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.

OMRON, 1999

by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of

OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-

stantly striving to improve its high-quality products, the information contained in this manual is subject to change without

notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility

for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in

this publication.

vii

TABLE OF CONTENTS

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

2 General Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

4 Operating Environment Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix

5 Application Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx

6 EC Directives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi

7 Other Applicable Directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii

8 Precautions for the C200H-AD003, C200H-DA003/004, and C200H-MAD01. . xxii

9 Changes to the CJ1W-DA08V/08C and CJ1W-MAD42 . . . . . . . . . . . . . . . . . . . . xxiii

SECTION 1

System Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1-1 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1-2 Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1-3 Function Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

SECTION 2

CS-series Analog Input Units . . . . . . . . . . . . . . . . . . . . . . 13

2-1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2-2 Operating Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2-3 Components and Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

2-4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

2-5 Exchanging Data with the CPU Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

2-6 Analog Input Functions and Operating Procedures. . . . . . . . . . . . . . . . . . . . . . . . 52

2-7 Adjusting Offset and Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

2-8 Handling Errors and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

SECTION 3

CJ-series Analog Input Units . . . . . . . . . . . . . . . . . . . . . . 77

3-1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

3-2 Operating Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

3-3 Components and Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

3-4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

3-5 Exchanging Data with the CPU Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

3-6 Analog Input Functions and Operating Procedures. . . . . . . . . . . . . . . . . . . . . . . . 104

3-7 Adjusting Offset and Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

3-8 Handling Errors and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

viii

TABLE OF CONTENTS

SECTION 4

CS-series Analog Output Units . . . . . . . . . . . . . . . . . . . . 125

4-1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

4-2 Operating Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

4-3 Components and Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

4-4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

4-5 Exchanging Data with the CPU Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

4-6 Analog Output Functions and Operating Procedures . . . . . . . . . . . . . . . . . . . . . . 149

4-7 Adjusting Offset and Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

4-8 Handling Errors and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

SECTION 5

CJ-series Analog Output Unit . . . . . . . . . . . . . . . . . . . . . 169

5-1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170

5-2 Operating Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174

5-3 Components and Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

5-4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184

5-5 Exchanging Data with the CPU Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188

5-6 Analog Output Functions and Operating Procedures . . . . . . . . . . . . . . . . . . . . . . 197

5-7 Adjusting Offset and Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204

5-8 Handling Errors and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

SECTION 6

CS-series Analog I/O Unit . . . . . . . . . . . . . . . . . . . . . . . . 221

6-1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222

6-2 Operating Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230

6-3 Components and Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

6-4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

6-5 Exchanging Data with the CPU Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

6-6 Analog Input Functions and Operating Procedures. . . . . . . . . . . . . . . . . . . . . . . . 252

6-7 Analog Output Functions and Operating Procedures . . . . . . . . . . . . . . . . . . . . . . 259

6-8 Ratio Conversion Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262

6-9 Adjusting Offset and Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

6-10 Handling Errors and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281

TABLE OF CONTENTS

SECTION 7

CJ-series Analog I/O Unit. . . . . . . . . . . . . . . . . . . . . . . . . 287

7-1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288

7-2 Operating Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295

7-3 Components and Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302

7-4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305

7-5 Exchanging Data with the CPU Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309

7-6 Analog Input Functions and Operating Procedures. . . . . . . . . . . . . . . . . . . . . . . . 318

7-7 Analog Output Functions and Operating Procedures . . . . . . . . . . . . . . . . . . . . . . 327

7-8 Ratio Conversion Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333

7-9 Adjusting Offset and Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336

7-10 Handling Errors and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352

Appendices

A Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359

B Sample Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363

C Data Memory Coding Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401

TABLE OF CONTENTS

About this Manual:

This manual describes the installation and operation of the CS1W-AD041-V1, CS1W-AD081-V1,

CS1W-AD161, CJ1W-AD041-V1, and CJ1W-AD081-V1 Analog Input Units; the CS1W-DA041, CS1W-

DA08V, CS1W-DA08C, CJ1W-DA021, CJ1W-DA041, CJ1W-DA08V, and CJ1W-DA08C Analog Output

Units; and the CS1W-MAD44 and CJ1W-MAD42 Analog I/O Units. This manual includes the sections

described below.

The input function of CS/CJ-series Analog I/O Units converts analog sensor output to the digital format

and transmits it to CS/CJ-series PLCs. The output function converts digital data from the PLC to the

analog format for output.

Please read this manual and the other manuals related to the CS/CJ-series Analog I/O Units carefully

and be sure you understand the information provided before attempting to install and operate the

Units. The manuals used with the CS/CJ-series Analog I/O Units are listed in the following table. The

suffixes have been omitted from the catalog numbers. Be sure you are using the most recent version

for your area.

Name Cat. No. Contents

SYSMAC CS-series

CS1G/H-CPU@@-EV1, CS1G/H-CPU@@H

Programmable Controllers Operation Manual

W339 Describes the installation and operation

of the CS-series PLCs.

SYSMAC CS Series

CS1D-CPU@@H CPU Units, CS1D-CPU@@S CPU Units,

CS1D-DPL01 Duplex Unit, CS1D-PA/PD@@@ Power

Supply Unit

CS1D Duplex System Operation Manual

W405 Provides an outline of and describes the

design, installation, maintenance, and

other basic operations for a Duplex Sys-

tem based on CS1D CPU Units.

SYSMAC CJ-series

CJ1G-CPU@@, CJ1G/H-CPU@@H, CJ1M-CPU@@

Programmable Controllers Operation Manual

W393 Describes the installation and operation

of the CJ-series PLCs.

SYSMAC CS/CJ-series

CS1G/H-CPU@@-EV1, CS1G/H-CPU@@H, CJ1G-

CPU@@, CJ1G/H-CPU@@H, CJ1M-CPU@@

Programmable Controllers Programming Manual

W394 Describes the programming methods

required to use the functions of the CS/

CJ-series PLCs.

SYSMAC CS/CJ-series

CS1G/H-CPU@@-EV1, CS1G/H-CPU@@H, CJ1G-

CPU@@, CJ1G/H-CPU@@H, CJ1M-CPU@@

Programmable Controllers Instructions Reference Manual

W340 Describes the ladder diagram program-

ming instructions supported by CS/CJ-

series PLCs.

SYSMAC WS02-CXPC1-EV50

CX-Programmer Ver. 5.0 Operation Manual

W437 Provides information on how to use the

CX-Programmer, a programming device

that supports the CS/CJ-series PLCs.

SYSMAC CS/CJ-series

CQM1H-PRO01-E, CQM1-PRO01-E, C200H-PRO27-E

Programming Consoles Operation Manual

W341 Provides information on how to program

and operate CS/CJ-series PLCs using a

Programming Console.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de E/S de Omron

Omron

Omron C120 Guía del usuario

Omron

Omron GI-SMD/SID Manual de usuario

Omron

Omron GX Series Manual de usuario

Omron

Omron 3G3AX-EIO21-RE Manual de usuario

Omron

Omron SYSMAC C series Manual de usuario

Omron

Omron GI-S series Manual de usuario

Omron

Omron SYSMAC CS1W-PRM21 Manual de usuario

Omron

Omron C500-ASC04 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Omron

Omron GI-S series Manual de usuario

Omron

Omron SMARTSLICE Guía rápida

Omron

Omron C500-LDP01-V1 Manual de usuario

Omron

Omron Sysmac CJ Series Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

Omron

Omron NX-AD series Manual de usuario

Omron

Omron DST1 Series Manual de usuario

Omron

Omron CJ1W-AD041-V1 Manual de usuario

Omron

Omron NX-ID3343 Manual de usuario

Omron

Omron CJ1M-CPU21 Manual de usuario

Omron

Omron GRT1-ECT SmartSlice Manual de usuario

Omron

Omron C200H-AD002 Manual de usuario

Omron

Omron SYSMAC CJ1W-AD04U Manual de usuario

Omron

Omron CJ1W-TS561 Manual de usuario

Omron

Omron CS1W-CT021 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario

Contec

Contec PIO-16L(PCI)H Manual de usuario