Omron G3H Manual de usuario
224 Solid State Relays G3@-VD G3H/G3HD
Solid State Relays G3@-VD
G3H/G3HD
Refer to Warranty and Application Considerations (page 1), Safety
Precautions (page 4), and Technical and Safety Information (page 6).
International Standards for G3H Series,
Same Profile as LY Power Relays
• Shape-compatible with mechanical relays.
• Certified by UL, CSA, and VDE (models numbers with a suffix
of “-VD”).
• Socket type, same size as LY Power Relays.
• Operation indicator provided to confirm input (models numbers
with “N” before the suffix).
Model Number Structure
■Model Number Legend
1. Basic Model Name
G3H: Solid State Relay
2. Rated Load Power Supply Voltage
2: 200 VAC
3, 4. Rated Load Current
03: 3 A
5. Terminal Type
S: Plug-in terminals
6. Zero Cross Function
Blank: Equipped with zero cross function
L: Not equipped with zero cross function
7. Operation Indicator
Blank: Not equipped with operation indicator
N: Equipped with operation indicator
8. Certification
VD: Certified by UL, CSA, and VDE standards
1. Basic Model Name
G3H: Solid State Relay
2. Load Power Supply Type
D: DC
3. Rated Load Power Supply Voltage
X: 50 VDC
4. Rated Load Current
03: 3 A
5. Terminal Type
S: Plug-in terminals
6. Operation Indicator
Blank: Not equipped with operation indicator
N: Equipped with operation indicator
7. Certification
VD: Certified by UL, CSA, VDE
1234 5678
G3H-@@@@@@-@
1234
56 7
G3HD-@@@@-@
Solid State Relays G3@-VD G3H/G3HD 225
Ordering Information
■List of Models
Note: 1. Product is labelled “250 VAC”.
2. Product is labelled “50 VDC”.
3. When ordering, specify the rated input voltage.
■Accessories (Order Separately)
Connecting Sockets
Refer to page 297 for details.
Specifications
■Ratings (at an Ambient Temperature of 25°C)
Input
Note: Constant-current input circuit.
Isolation Zero cross
function Indicator Rated output load Rated input voltage Model
Photocoupler Yes Yes 3 A at 100 to 240 VAC
(See note 1.) 5 to 24 VDC G3H-203SN-VD
Phototriac coupler No 5 VDC G3H-203SLN-VD
12 VDC
24 VDC
Photocoupler No 3 A at 4 to 48 VDC
(See note 2.) 5 to 24 VDC G3HD-X03SN-VD
Photocoupler Yes No 3 A at 100 to 240 VAC
(See note 1.) 4 to 24 VDC G3H-203S-VD
Phototriac coupler No 5 VDC G3H-203SL-VD
12 VDC
24 VDC
Photocoupler No 3 A at 4 to 48 VDC
(See note 2.) 4 to 24 VDC G3HD-X03S-VD
Item PTF08A-E PT08 PT08-0 PT08QN
Connecting Front connecting Back connecting
Mounting method/
Terminal type Track mounted
screw terminals Solder terminals PCB terminals Wire-wrapping terminals
Hold-down clip PYC-A1 PYC-P
Model Rated voltage Operating voltage Impedance Voltage level
Must operate voltage Must release voltage
G3H-203SN-VD 5 to 24 VDC 4 to 28 VDC 15 mA max. (See note.) 4 VDC max. 1 VDC min.
G3H-203SLN-VD 5 VDC 4 to 6 VDC 390 Ω±20% 4 VDC max. 1 VDC min.
12 VDC 9.6 to 14.4 VDC 900 Ω±20% 9.6 VDC max.
24 VDC 19.2 to 28.8 VDC 2 kΩ±20% 19.2 VDC max.
G3HD-X03SN-VD 5 to 24 VDC 4 to 28 VDC 1.5 kΩ+20%/–10% 4 VDC max. 1 VDC min.
G3H-203S-VD 4 to 24 VDC 3 to 28 VDC 15 mA max. (See note.) 3 VDC max. 1 VDC min.
G3H-203SL-VD 5 VDC 4 to 6 VDC 390 Ω±20% 4 VDC max. 1 VDC min.
12 VDC 9.6 to 14.4 VDC 900 Ω±20% 9.6 VDC max.
24 VDC 19.2 to 28.8 VDC 2 kΩ±20% 19.2 VDC max.
G3HD-X03S-VD 4 to 24 VDC 3 to 28 VDC 1.5 kΩ+20%/–10% 3 VDC max. 1 VDC min.
226 Solid State Relays G3@-VD G3H/G3HD
Output
■Characteristics
Engineering Data
Load Current vs.
Ambient Temperature
Characteristics
One Cycle Surge
Current: Non-repetitive
Model Applicable load
Rated load voltage Load voltage range Load current Inrush current
G3H-203SN-VD
G3H-203S-VD 100 to 240 VAC 75 to 264 VAC 0.1 to 3 A 45 A 60 Hz, 1 cycle
G3H-203SLN-VD
G3H-203SL-VD
G3HD-X03SN-VD
G3HD-X03S-VD 4 to 48 VDC 3 to 52.8 VDC 0.1 to 3 A 18 A (10 ms)
Model G3H-203SN-VD/203S-VD G3H-203SLN-VD/203SL-VD G3HD-X03SN-VD/X03S-VD
Operate time 1/2 cycle of load power source +
1msmax. 1 ms max. 0.5 ms max.
Release time 1/2 cycle of load power source + 1 ms max. 2 ms max.
Output ON voltage drop 1.6 V (RMS) max. 1.5 V max.
Leakage current 5 mA max. (at 100 VAC);
10 mA max. (at 200 VAC) 2.5 mA max. (at 100 VAC);
5 mA max. (at 200 VAC) 5 mA max. (at 50 VDC)
Insulation resistance 100 MΩmin. (at 500 VDC)
Dielectric strength 2,000 VAC, 50/60 Hz for 1 min 1,500 VAC, 50/60 Hz for 1 min
Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude
Shock resistance Destruction: 1,000 m/s2
Ambient temperature Operating: –30°C to 80°C (with no icing)
Storage: –30°C to 100°C (with no icing)
Ambient humidity 45% to 85%
Certified standards G3H: UL508, CSA C22.2 No. 14, EN60947-4-3
G3HD: UL508, CSA C22.2 No. 14, EN60950
Weight Approx. 50 g
Ambient temperature (°C)
Load current (A)
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
Inrush current (A, Peak)
Energized time (ms) Energized time (ms)
G3HD-X03SN-VD/X03S-VD
Inrush current (A)
G3H-203SN-VD/203S-VD/203SLN-VD/
203SL-VD
G3HD-X03SN-VD/X03S-VD
G3H-203SN-VD/203S-VD/203SLN-VD/
G3H-203SL-VD
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K057-E1-05
Solid State Relays G3@-VD G3H/G3HD 227
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Safety Precautions
■Precautions for Correct Use
Please observe the following precautions to prevent failure to
operate, malfunction, or undesirable effect on product performance.
The SSR case serves to dissipate heat. Install the relays so that they
are adequately ventilated. If poor ventilation is unavoidable, reduce
the load current by half.
Connection
With the SSR for DC switching, the load can be connected to either
positive or negative output terminal of the SSR.
Protective Component
Since the SSR does not incorporate an overvoltage absorption
component, be sure to connect an overvoltage absorption
component when using the SSR under an inductive load.
1
3
5
7
2
4(+)
6(−)
8
−+
−+
(+)
(−)
( )
Load Load
Input voltage
2. The coil has no polarity.
28 max.
21.5 max. 36.5 max.
42.5 max.
Terminal Arrangement/
Internal Connections
(BottomView)
Input
Note: 1. The plus and minus symbols
shown in the parentheses
are for DC loads.
Load power
supply
Este manual sirve para los siguientes modelos
7
Otros manuales de Hardware de computadora de Omron
Omron
Omron CP1L Manual de usuario
Omron
Omron CJ1W- ECT21 Manual de usuario
Omron
Omron CP1E-E14SDR-A Manual de usuario
Omron
Omron 3G8F5-DRM21 Manual de usuario
Omron
Omron SYSMAC CP Series Manual de usuario
Omron
Omron G3B Manual de usuario
Omron
Omron G3R-I-O Manual de usuario
Omron
Omron JUSP-NS300 Manual de usuario
Omron
Omron FJ-AP1 Manual de usuario
Omron
Omron CJ2H-CPU64 - Manual de usuario
Omron
Omron G3RV Manual de usuario
Omron
Omron XTRADRIVE - Manual de usuario
Omron
Omron Junma ML-II SJDE-02ANA-OY Guía rápida
Omron
Omron GRT1-PNT Manual de usuario
Omron
Omron CP1L-E Manual de usuario
Omron
Omron G3PB Manual de usuario
Omron
Omron Sysmac NJ-series Manual de usuario
Omron
Omron E5ZN-DRT Guía de configuración
Omron
Omron NJ501-1400 Manual de usuario
Omron
Omron SYSMAC CJ2H-CPU6@-EIP Manual de instrucciones
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
