Omcan BS-VE-3200-SS Manual de usuario
Bandsaw
Model BS-VE-3200-SS
Item 45979
Instruction Manual
Revised - 11/21/2023
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: [email protected]
www.omcan.com
2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 5
-------------------------------------------------------------------------- 6
----------------------------------------------------------------------------------------- 6 - 7
----------------------------------------------------------------------------------------- 7
----------------------------------------------------------------------------- 8 - 17
---------------------------------------------------------------------------- 18
---------------------------------------------------------------------------- 19
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Operation
Maintenance
Parts Breakdown
Electrical Schematics
Warranty Registration
Model BS-VE-3200-SS
3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
4
Safety and Warranty
IMPORTANT NOTES
When the upper door is opened where the upper cylindrical ywheel is located, this door is constantly pressing
an upper micro switch which goes from NC (normally closed) to NO (normally open), whereby the engine of the
machine stops immediately.
When the lower door is opened where the lower conical ywheel is located, this door is constantly pressing a
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
General Information
5
Safety and Warranty
lower micro switch which goes from NC (normally closed) to NO (normally open) so the machine motor stops
immediately.
As an extreme precaution, the emergency button should be pressed to carry out cleaning, maintenance, meat
thickness supervision work.
RESIDENTIAL USERS: vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as
possible.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without diculty.
In any case, for suitable recycling, we suggest disposing of the products separately (dierentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
6
A band saw is a machine for cutting bones and cutting meat that is very necessary in butchers,
slaughterhouses and delicatessens as they eortlessly and very cleanly cut large bones and pieces of meat.
These saws are also widely used in industrial kitchens as well as in hotels and restaurants.
These meat and bone cutting machines oer excellent performance when working with them in addition to the
security that is needed for the person who is working with them, do not suer any mishap or run the risk of
accidentally cutting themselves.
With this meat cutting saw you can regulate the thickness of the piece to be cut as well as a tray that slides to
be able to remove the pieces already cut in a practical and safe way.
In addition, the waste obtained with this meat saw can be removed very easily thanks to the box it has.
Using this electric saw to cut meat in the correct and proper way will provide good quality, safe and hygienic
cuts. In addition, its butcher’s saw blade can cut any type of bone or meat with amazing ease.
GENERAL TIPS
It is necessary to pay attention to a series of tips to correctly use this saw to cut bone and meat that, in addition
to facilitating this task, will give the security that is needed when operating with it.
It is essential to wear protective gloves whenever it is going to be used. They have to be adapted to the food
industry, as well as provided with protection against cuts. The use of metal mesh gloves is prohibited as there
Operation
Model BS-VE-3200-SS
Blade Length 126” / 3200mm
Blade Saw Dimensions 0.8” x 12.6” / 20 x 320mm
Cutting Capacity 15” x 18” / 381 x 457mm
Cutting Table Sliding
Power 3 HP / 2237 W
Electrical 220V / 60Hz / 3
Weight 418.9 lbs. / 190 kgs.
Dimensions 41.4” x 36” x 75.6” / 1052 x 914 x 1920mm
Packaging Weight 525 lbs. / 238.1 kgs.
Packaging Dimensions 48” x 40” x 84” / 1219 x 1016 x 2134mm
Item Number 45979
Technical Specications
7
is a risk of them catching on the tape.
Before starting to use the butcher bone cutter, carefully read the instructions given by the manufacturer
regarding the limits of the thickness, hardness and size of the elements of this machine, which by the way, only
you can use to cut the materials indicated in the instructions.
When making the cut, do not push the saw blade to the piece to be cut. It must be the blade that moves by
itself through the meat or bone with the help of light pressure. Forcing the cut too much can cause the saw
blade to break.
HOW TO CLEAN
One of the most important steps for the proper functioning of a band butcher saw is cleaning it. The continuous
cutting of materials creates waste that can accumulate in the spaces of the machine.
A handheld vacuum cleaner can be used to remove the remains of the pieces that have been cut on the band
saw, or even special brushes for this.
It is important to check each corner and space to make sure that everything is very clean, especially the gap in
which the saw crosses, since many debris accumulate there. It is advisable to do this every time the cutter is
used.
MAINTENANCE
To keep the band saw ready to work at all times and to ensure that its life is longer, it is necessary to carry out
periodic inspections in addition to maintaining its good conservation.
To keep the saw in the correct position and to ensure smooth and clean cuts, the positioning of its guides
should be checked. To do this, check that they are only touching the body of the saw. If they have lost
thickness or are too tight, they will have to be changed or added some sheets that can compensate for wear.
This will make precise cuts.
Another part that must be taken care of to ensure that the band saw does its job well is aligning the ywheels,
which are responsible for supporting the main body of the machine. You have to achieve equality between
the two so that they hold and keep the band saw in place. The tools that are in charge of holding the piece to
be cut are the dams and they have to remain with a level of rmness and correct adjustment. In this way the
material will stay in place, so its correct maintenance is also essential.
Operation
Maintenance
8
Parts Breakdown
Model BS-VE-3200-SS 45979
9
Parts Breakdown
Model BS-VE-3200-SS 45979
10
Parts Breakdown
Model BS-VE-3200-SS 45979
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sierra de Omcan
Omcan
Omcan BS-IT-1651 Manual de usuario
Omcan
Omcan BS-CN-1651-T Manual de usuario
Omcan
Omcan Elite Series Manual de usuario
Omcan
Omcan BS-IT-1981-S Manual de usuario
Omcan
Omcan BS-IT-1524 Manual de usuario
Omcan
Omcan BS-VE-2489-E Manual de usuario
Omcan
Omcan BS-VE-3200-S Manual de usuario
Omcan
Omcan B34 Manual de usuario
Omcan
Omcan BS-BR-3150-SS Manual de usuario
Omcan
Omcan BS-CN-1651 Manual de usuario
