oliser MS Manual de usuario
Mesrutiyet caddesi. Hatay Sokak. 17/B
06640. Kızılay / Ankara
Turkey
Tel : +90 312 417 72 75
Fax : +90 312 425 72 81
Web : www.oliser.com.tr
MSEASYINSTRUCTIONS
To Order Call: +90 312 417 72 75
PREPARATION
Place an Ink supply bottle to the back of the machine and insert the
ink supply tube into the bottle.
Plug in the plug and the machine will be ready to start filling .
Now, The machine is ready to fill the cartridges. Before filling the
cartridges, be sure that they are empty. If not, evacuate the remaining ink
from cartrdige.
This machine is desinged to only fill FRESH CARTRIDGES (you
can also fill non-fresh cartridges using a steam generator before filling)
Strictly recommended : Before filling the cartridges we
recommend you to clean the printheads of the cartridges by a steam
genarator. It will help you to fill the cartridges easily and will open the all
clogged or dried printheads, So, your success rate will inscrease
To Order Call: +90 312 417 72 75
Check, if the cartridge is undamaged for
filling.
Place the cartidge to the evacuation
station
Switch On for Evacuation
Be sure that the remaning ink is
removed, and flip the handle down to take
out the cartridge
To Order Call: +90 312 417 72 75
Take the cartridge out for starting filling
operation
Place the cartridge to the filling station
Flip the handle up to secure the cartridge
Push the Start/Stop button to start
filling.Includingpressurizing machine will fill
the cartridge in 2,5 minutes,when filling
operation has completed place the cartridge
into evacuation station and evacuate 2-3
seconds for priming.
To Order Call: +90 312 417 72 75
Place the cartridge to the 15/40/45
Evacuation Station and Flip the handle up
to squeeze the cartridge
Switch On for Evacuation
When the evacuation operation is
completed, then remove the cartridge from
the station, fliping the handle down
Place the cartridge to the 15/40/45
filling station for filling operation.Including
pressurizing machine will fill the cartridge
in 2,5 minutes, when filling operation has
complated place the cartridge into
evacuation station and evacuate 2-3
seconds forpriming.
Tube replacement of motors
To Order Call: +90 312 417 72 75
Tabla de contenidos
Otros manuales de Accesorios de impresora de oliser
