OHAUS SCOUT II Manual de usuario

Ohaus Scout II (RS232)

Manufacturer: Ohaus

Product Range: Scout 2

Model Tested: SR2020

Capacity - 200g

Readability - 0.01g

Note:

The Scout 2 must be a version with an in built RS232 interface (the product code for these normally start with SRxxxx) to

work with the LogIT Serial Balance Adapter. A separate LogIT adapter is available for the non RS232 Scout balances -

contact your LogIT distributor or see www.dcpmicro.com.

Setting up the balance:

• Getting into Menu Mode

Starting with the Balance turned off, press and hold the “Zero/On” button until the word “MENU” is displayed on the

balance, now release the button, the display should now read “A. OFF”

Press the “Mode” button repeatedly until “Print” is displayed.

• Turning the RS232 Interface ON.

Press the “Zero” button, “Powr” should now be displayed.

Press the “Zero” button, the display will now read either “on” or “OFF”.

Press the “Mode” button repeatedly until “On” is displayed.

Press the “Zero” button, “Powr” should now be displayed again.

• Setting the Baud rate to 1200.

Press the “Mode” button, “bAud” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “1200” is displayed.

Press the “Zero” button, “bAud” should now be displayed again.

• Setting the number of data bits to 7.

Press the “Mode” button, “dAtA” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “-7-” is displayed.

Press the “Zero” button, “dAtA” should now be displayed again.

• Setting the parity to none.

Press the “Mode” button, “PAr” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “nonE” is displayed.

Press the “Zero” button, “PAr” should now be displayed again.

Serial Balance Adapter Data Sheet OH-4

Setting up the balance (continued):

• Setting the stop bits to 2.

Press the “Mode” button, “StoP” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “-2-” is displayed.

Press the “Zero” button, “StoP should now be displayed again.

• Setting the balance to send continuous data.

Press the “Mode” button, “APrnt” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “Cont” is displayed.

Press the “Zero” button, “APrnt” should now be displayed again.

• Setting the balance to send out all readings.

Press the “Mode” button, “PrStb” should now be displayed, press the “Zero” button.

Press the “Mode” button repeatedly until “OFF” is displayed.

Press the “Zero” button, “PrStb” should now be displayed again.

• Returning back to normal balance operation.

Press the “Mode” button, “END” should now be displayed.

Press the “Zero” button.

The balance is now set up to work with the LogIT Serial Balance Adapter - See Connecting the Balance for details of the

lead required to connect the balance to the LogIT Adapter.

Connecting the balance:

A cable must be made to connect the balance serial port to the LogIT Serial Adapter using the wiring information below.

Scout 2 RS232 port, 9 way D Socket Balance Adapter, 9 Way D Socket

pin 2 pin 2

pin 5

pin 6

pin 7 pin 5

Note: These connection instructions are designed for use with the 9 pin boxed version of the LogIT Serial Balance

Adapter. If using the original 25 pin lead type connection you need to use adapter pin 3 instead of pin 2 (data out) and

adapter pin 7 instead of pin 5 (ground).

Serial Balance Adapter Data Sheet OH-4

Connect balance pin 5 to pin 6 to bypass handshaking

Otros manuales para SCOUT II

Tabla de contenidos

Otros manuales de Escala de OHAUS

OHAUS

OHAUS Ranger R41ME6-M Manual de usuario

OHAUS

OHAUS Pioneer PX85 Manual de usuario

OHAUS

OHAUS YA102 Gold Manual de usuario

OHAUS

OHAUS Catapult 1000 Manual de usuario

OHAUS

OHAUS ES series Manual de usuario

OHAUS

OHAUS Ranger 7000 R71MHD3 Manual de usuario

OHAUS

OHAUS Valor 1000 Manual de usuario

OHAUS

OHAUS Compass CR221 Manual de usuario

OHAUS

OHAUS EC Series Manual de usuario

OHAUS

OHAUS DISCOVERY BALANCE Manual de usuario

OHAUS

OHAUS VF Series Manual de usuario

OHAUS

OHAUS ES series Manual de usuario

OHAUS

OHAUS ES6R Manual de usuario

OHAUS

OHAUS ES50R Manual de usuario

OHAUS

OHAUS EXPLORER PRO Manual de usuario

OHAUS

OHAUS YA Series Manual de usuario

OHAUS

OHAUS Navigator NV212 Manual de usuario

OHAUS

OHAUS Explorer EX6202N Manual de usuario

OHAUS

OHAUS Valor 3000 Manual de usuario

OHAUS

OHAUS Defender 6000 Series Manual de usuario

OHAUS

OHAUS Triple Pro TP2611 Manual de usuario

OHAUS

OHAUS BW Series Manual de usuario

OHAUS

OHAUS Harvard Trip 1450-SD Manual de usuario

OHAUS

OHAUS RE-C series Manual de usuario

Manuales populares de Escala de otras marcas

AWS

AWS ZEO-50 Manual de usuario

Gima

Gima Glass Body Fat Analyzer Manual de lista de piezas

Seca

Seca 374 Manual de usuario

TEC

TEC TEC SL59 SERIES Manual de usuario

Axis

Axis B/E Series Manual de usuario

Alecto

Alecto ACW-40 Manual de usuario

Rice Lake

Rice Lake MSI-4260 IS Manual de usuario

IKA

IKA RCT basic safety control Manual de usuario

ADE

ADE M20011 Manual de usuario

Duronic

Duronic KS3000 Manual de usuario

Digi

Digi SM-720 Manual de usuario

Cardinal

Cardinal CS Series Manual de usuario

Korona

Korona Kastella Manual de usuario

A&D

A&D FC-50Ki Manual de usuario

BDA

BDA CAMARGUE Manual de usuario

Tanita

Tanita HD-357 Manual de usuario

Leifheit

Leifheit 03173 Manual de usuario

Lumme

Lumme LU-1340 Manual de usuario