Oce Sx1481 Manual de usuario

D99-91800-60

ENGLISH

Safety Information

• To achieve optimal machine performance you should carefully review and follow the instruc-

tions in this manual.

• Please keep this manual in a convenient location near the machine.

nThe following indicators, found on machine labels and throughout this manual, are used to

categorize the level of precaution that should be used when operating the machine.

Ignoring this symbol could result in serious injury or death.

Ignoring this symbol could result in personal injury and/or dam-

age to property.

nMeaning of Symbols

A triangle indicates a danger which you

should take precautions against.

Example :

Warning of high temperature

Warning of hand injury

A diagonal line indicates a prohibited course

of action.

Example:

Prohibited action

Disassembly prohibited

Do not touch

Do not touch with a wet hand

A solid circle indicates a required course of

action.

Example :

Alert of required action

Remove the power plug form

the outlet.

Always connect the machine

to an outlet with a ground

connection.

ENGLISH

Installation

Do not place any liquids, metal objects (necklaces, paperclips, etc.) or

heating elements (candles, etc.) directly onto the machine.

Water and metal objects that penetrate the machine could result in electrical

shock, machine malfunction and/or ﬁre.

Should a metal object, water or any other foreign substance penetrate the

machine, immediately turn OFF the power, unplug the power cord from the wall

outlet and call your authorized Océ dealer.

Do not place any volatile liquids, such as alcohol or paint thinners, near

the machine.

If liquids are spilled on the machine’s electrical components it may result in an

electrical shock or ﬁre.

Do not place the machine on an unstable or tilted bench, or in a location

subject to a lot of vibration or shock.

If the machine is dropped or falls it could result in personal injury and/or

machine damage.

Do not place the machine in the following locations:

• A location exposed to direct sunlight

• A dusty location, or a site exposed to soot or steam

• A location subject to high temperature

• A location near open ﬂames

• A location subject to a large range of temperature change

• A location subject to acid gas, alkaline gas or vapor

• A location near electrical devices which generate a magnetic ﬁeld

If the machine is located near any of these conditions it may result in a

machine malfunction, electrical shock and /or ﬁre.

Do not block the ventilation holes and louvers on the machine.

If the ventilation holes and louvers are blocked, heat could accumulate inside

the machine which may result in a ﬁre.

Do not place or use the machine outdoors

The machine was designed for indoor use only.

When installing the machine with casters, mount it on a secure base.

If the unit moves or falls it may result in personal injury and/or machine damage.

ENGLISH

Ventilation

Use the machine in a well ventilated location.

• A negligible and harmless amount of ozone is generated during normal

machine operation. An unpleasant odor may become noticeable in poorly

ventilated areas during extensive machine operation. For a comfortable,

healthy and safe operating environment, it is recommended that the area be

well ventilated.

• New electrical devices are generally likely to release small amounts of Volatile

Organic Compounds (VOC), especially during initial machine usage.

Power Source

Use only the speciﬁed power source voltage.

Failure to do so could result in a ﬁre or electrical shock.

Avoid using extension cords.

If using an extension cord is unavoidable or necessary, use only a cord that

has more voltage capacity than the maximum voltage and power consumption

capacity of the machine.

If the voltage capacity of the cord is less than that of the machine, it may cause

overheating and a ﬁre. Refer to the user’s manual for the maximum voltage and

power requirements of the machine.

Do not use a multiple outlet adapter and branching socket, or connect

multiple loads to one socket.

Doing so could cause a ﬁre or electrical shock.

Be sure to insert the power plug ﬁrmly into the power socket.

If metallic objects come into contact with the power plug's metal pins (plug

terminals), it may result in a ﬁre or electrical shock.

Do not plug, unplug, or handle the power cord with a wet hand.

Do not plug, unplug or handle the power cord with a wet hand.

Do not scratch, scrape, modify, place a heavy object on, compress, pinch,

excessively bend, twist, pull on, or damage the power cord.

Use of a damaged power cord (exposed core wire, broken wire, etc.) could

result in a ﬁre or electrical shock.

Should any of these conditions occur, call your authorized Océ dealer.

ENGLISH

Do not tie the power cord in a knot or bundle up tightly.

Doing so may cause a ﬁre or electrical shock.

Keep away from heat sources such as stoves and heaters.

Failure to do so may cause the power cord coating to melt, resulting in a ﬁre or

electrical shock.

When dust is found between the plug terminals, clean the area with a dry

cloth.

Dust that accumulates between the plug terminals may cause a ﬁre or electri-

cal shock.

Only use the power cord supplied with your machine.

Using another cord may result in an electrical shock and/or ﬁre.

Do not tag on the cord.

Always grasp the power plug when unplugging the power cord.

Pulling on the power cord could damage the cord, resulting in a ﬁre or electrical

shock

If the machine will be idle for an extended period of time, such as holi-

days, turn the power OFF and unplug the power cord.

*Please note that you will not be able to receive faxes if the power if OFF.

Create ample clearance around the outlet and power cord.

Do not place any objects around the outlet and power cord that could impede

your access to these areas in the event of an emergency.

During electrical storms, the plug should be disconnected from the outlet.

Electrical storms could cause a ﬁre, electrical shock or damage to the machine.

If the following problems occur, ﬁrst turn the power switch OFF, unplug

the power cord and contact your authorized Océ dealer:

• Damage or cut power cord

• Machine has been dropped or damaged

• Abnormal performance

• Liquids have penetrated the machine

ENGLISH

Grounding

Connect the power cord to a grounded wall outlet.

Failure to do so may result in a short circuit, ﬁre and/or electrical shock.

Do Not Disassemble or Modify the Machine

Do not attempt to disassemble or modify the machine.

Except for authorized repair professionals, do not disassemble or modify the

machine or any of its parts.

Doing so may result in an electrical shock, ﬁre and/or personal injury.

Handling Precautions

Do not drop or spill any foreign substance such as water, paper clips, or

staples into the machine.

Doing so could cause a ﬁre or electrical shock.

If this occurs, immediately turn the power OFF, unplug the power cord and

contact your authorized Océ dealer.

When using cleaning agents or detergents around the machine, such as

wall or ﬂoor cleaner, avoid contact with the phone cable and power plug.

If these materials come into contact with the phone cable and power plug

immediately wipe the effected area with a dry cloth.

Failure to do so could cause a ﬁre or electrical shock.

Whenever moving the machine, be sure to disconnect the power cord and

other cables.

Failure to do so could damage the power cord and/or phone cable which may

result in an electrical shock or ﬁre.

Gently close the machine cover to avoid trapping your hands underneath

the cover.

Negligent use of the machine may result in personal injury.

ENGLISH

Internal cleaning and machine maintenance should be routinely per-

formed by your authorized Océ dealer.

Accumulated dust in the machine may cause ﬁre or breakdown.

Contact your authorized Océ dealer to learn more about their maintenance

plans.

Never use a pointed object, such as a stylus pen, or use excessive force

on the LCD display.

If the LCD display breaks or leaks any liquid as a result of such force, do not

touch it. If your eyes or mouth come into contact with the contents of a broken

LCD display, ﬂush the effected area with water and seek immediate medical

attention.

Do not deviate from the instructions provided in this manual.

Doing so may result in machine malfunction and/or personal injury.

Do not drop this machine or use excessive force.

Doing so may result in machine malfunction and/or damage.

Use caution to avoid having toner come into contact with your eyes and

mouth.

If this happens, ﬂush the affected area with water and seek immediate medical

attention.

Do not inhale toner.

If this happens, seek immediate medical attention.

When you replace the drum cartridge, toner bottle, or toner cartridge, be

careful not to get residue on your hands and/or clothing.

If this happens, ﬂush the affected area with water.

Warning Signs

If the following warning signs occur, turn the power OFF immediately,

unplug the power cord and contact your authorized Océ dealer:

• Smoke is emitting from the machine

• Abnormal heat radiates from the machine

• Unusual sound

• Unusual smell

If any part of the machine breaks or malfunctions, turn the power OFF,

unplug the power cord and contact your authorized Océ dealer.

Continued use of the machine may result in machine damage, electrical shock,

ﬁre and/or personal injury.

ENGLISH

Consumables

Do not throw the drum cartridge, toner bottle or toner cartridge into an

open ﬂame.

Heated toner may spill and/or ignite resulting in a ﬁre and/or personal injury.

Do not disassemble the drum cartridge, toner bottle or toner cartridge.

The toner may come into contact with your eyes and/or mouth resulting in

personal injury.

Keep consumables, such as toner, away from open ﬂames, heating ele-

ments and hot surfaces.

Heated toner may spill and/or ignite resulting in a ﬁre and/or personal injury.

Keep drum cartridges, toner bottles, and toner cartridges out of the reach

of small children.

If these products come into contact with the mouth, or are ingested, seek

immediate medical attention.

Do not drop, throw or strongly shake the drum cartridge, toner bottle, or

toner cartridge.

It could cause toner scattering or printing defect.

Other Warning Signs

If you need to transport the machine over a long distance, consult your

authorized Océ dealer.

The machine is designed for domestic use only.

ENGLISH

D99-91800-60

Otros manuales para sx1481

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora todo en uno de Oce

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario

Oce sx1481 Manual de usuario

Manuales populares de Impresora todo en uno de otras marcas