Oce VarioPrint 6000 series Manual de usuario

Océ VarioPrint6000 series

Océ User manual

Maintenance tasks

Edition 2008-07 US

Océ

2006-2008 Océ

adapted, or transmitted in any form or by any means without written

permission from Océ.

Océ makes no representation or warranties with respect to the contents

hereof and specifically disclaims any implied warranties of merchantability

or fitness for any particular purpose.

Further, Océ reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation to notify

any person of such revision or changes.

Trademarks

List of trademarks

Océ, Océ VarioPrint6000 series are registered trademarks of

Océ-Technologies B.V.

Products in this publication are referred to by their general trade names. In

most, if not all cases, these designations are claimed as trademarks or

registered trademarks of their respective companies.

Trademarks

Table of Contents

Chapter 1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Notes for the reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Available documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Introduction to the maintenance tasks . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Determine the required maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Chapter 2

Maintenance tasks - Level 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Replace the cleaners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Lock the clean unit (left). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Lock the clean unit (right) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Chapter 3

Maintenance tasks - Level 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Remove sheets from the process modules. . . . . . . . . . . . . . . . . . . . . . . 34

Clean the OPC belt (left) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Clean the OPC belt (right) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Appendix A

Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Reader's comment sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Addresses of local Océ organisations . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Table of Contents

Chapter 1

Introduction

8 Chapter 1 Introduction

Notes for the reader

Introduction

This manual helps you to use the machine. The manual contains a description

of the machine and guidelines to use and operate the machine. There are also

tips to increase your knowledge of the machine and to help you manage the

workflow even better.

Definition

Attention Getters

Parts of this manual require your special attention. These parts provide

important, additional information or are about the prevention of damage to

your properties.

Note, Attention, and Caution

Caution: A part marked with Caution contains information to prevent

personal injury.

Attention: A part marked with Attention contains information to prevent

damage to items, for example the machine or a file.

Note: A part marked with Note contains additional information about the

correct operation of the machine.

Safety information

The safety information for this product is included in a separate user manual

with the title Safety information. This manual is part of the documentation set

that you received with your product.

Available documentation

Introduction

This machine is delivered with a documentation set that consists of the

following items.

■A CD-ROM with all the manuals mentioned below

■A hardcopy user manual entitled 'Safety information'.

■Integrated Online Helps in the printer driver, the Settings Editor and other

proprietary applications.

Note: Please check www.oce.com for the latest version of the documentation.

Main Content of the User Manuals

The following table provides an overview of the main content of the user

manuals.

[1]

[1] Main Content of the User Manuals

User Manual Main content

Operating

information

■Overview of the main system components

■Working with the operator panel

■Handling and managing jobs on the operator panel

■Add media, toner and staples

Workflow Use the machine in combination with

■Océ PRISMAproduction

■Océ PRISMAprepare

■Océ Doc Works

■Océ DPconvert

■Océ DocSetter

■XeroxDigiPath

■XeroxFreeFlowMakeready

Maintenance

tasks

■Replacing parts

■Cleaning parts

■Solve a paper jam in the engine module

Safety

information

■Instructions for safe use

■Safety Data Sheets

10 Chapter 1 Introduction

Introduction to the maintenance tasks

Introduction

This manual is intended for trained and certified operators who received the

special maintenance training for the printer. Therefore, this manual is only

intended as a reference guide for the described maintenance procedures.

On the operator panel, you must always press 'Next' to continue with the next

step, or 'Finish' to complete a maintenance task. After you finished a

maintenance task, the operator panel will also ask you to restart the system.

The procedures in this manual only describe the physical maintenance actions.

Note: In this manual and on the operator panel, the trained and certified

operator is referred to as the key operator.

Note: Only a key operator is allowed to perform the maintenance tasks that are

described in this manual. To make sure that only a key operator performs the

maintenance tasks, it is recommended to define a maintenance PIN in the

Settings Editor. Then the operator panel asks for the maintenance PIN when

you start the first task of a maintenance session. A maintenance session can

involve more than 1 maintenance task. A maintenance session ends when you

leave the maintenance screen that displays the maintenance tasks. When no

maintenance PIN is defined in the Settings Editor, the operator panel will not

ask for a maintenance PIN.

The maintenance levels

The machine is a high-volume production printer. Therefore, a short downtime

due to required maintenance is very important to you. To help you reduce the

downtime, 2 levels of maintenance tasks are defined which key operators can

be allowed to do. The following table gives an overview of the maintenance

levels and the respective maintenance tasks.

[2]

[2] Overview of the maintenance tasks (1 – 2)

Maintenance

level Maintenance task Where to find more

information

1 Replace the cleaners *** 'Replace the cleaners' on

page 16 ***

Lock the clean units ■*** 'Lock the clean unit

(left)' on page 29 ***

■*** 'Lock the clean unit

(right)' on page 31 ***

Tabla de contenidos

Otros manuales de Impresora todo en uno de Oce

Manuales populares de Impresora todo en uno de otras marcas

Triumph Adler

Triumph Adler DC 2016 Manual

Epson

Epson WorkForce WF-2510 Guía del usuario

Epson

Epson Stylus Scan 2000 Manual de instalación y operación

Epson

Epson PictureMate Snap PM 240 Manual de instrucciones

Konica Minolta

Konica Minolta bizhub C35 Manual de usuario

Brother

Brother MFC-J430w Manual de usuario

Konica Minolta

Konica Minolta BIZHUB 558 Manual de usuario

Lexmark

Lexmark MX710 Series Manual

Brother

Brother MFC-9760 Manual de usuario

Lexmark

Lexmark XC8155 Manual de usuario

Lexmark

Lexmark X642E Manual de usuario

Sharp

Sharp MX-2310U Guía

Aficio

Aficio 200 Manual de usuario

Canon

Canon ImageCLASS 2300 Manual

Ricoh

Ricoh Pro C900 Manual de usuario

Lexmark

Lexmark X925 Manual de usuario

Brother

Brother Business Smart MFC-J4510dw Manual de usuario

Epson

Epson Stylus CX8400 Series Manual de usuario