Nux Trident Instrucciones de montaje

NUX Trident Firmware Update Guide

!

Recipe

Computer running either Windows 7 or later or MacOS 10.10 or later.

the NUX Trident.

USB-C data/sync cable (Included).

NUX ACD-006A Power Supply (Included).

Quality USB-C to USB adapter (If your computer only comes with USB-C ports.)

A little patience. 1

!

Step by Step Guide

0. Download the firmware update kit & Install the NUX Device Updater.

Download the firmware update kit from the NUX Trident product page.

Unzip the downloaded file to a directory of your choice.

Install the NUX Device Firmware Updater. 2

1. Connect the NUX Trident to your computer and put it into DFU mode.

Connect the Trident to your Mac or PC using the included USB-C cable. 3

Run "NUX Device Updater", you will see the following interface:

Press and hold both the UP footswitch and the REVERB footswitch while turning on power,

release both footswitches when you see all the indicators on the NUX Trident turns on. The

prompt message "(No device found)" will change to "NUX - Trident - Device connected. ",

meanwhile the display on Trident shows .

2. Select the new firmware file(.bin) and start upgrading the firmware.

Select the new firmware file, the file name varies depending on the firmware version. However,

the file extension will always be '.bin'.

WARNING:

Please make sure that the selected firmware file is actual for the NUX Trident, Otherwise,

you may brick your pedal or cause it to malfunction.

Do NOT disconnect or power off the NUX Trident during the upgrade.

After the firmware is selected, click "Start Update" to continue.

It takes rouhly 30 minutes to finish, during the process the display on Trident shows

Sit back, relax and have a cup of coffe.

Once the firmware is successfully upgraded, the following alter window should pop out notifying

you that the upgrade is done. Meanwhile, the display on Trident shows .

3. Finish Updating

close the "NUX Device Updater"

Disconnect the USB cable, and turn off the power.

Grap your guitar/bass and try out the new features and tones.

Make sure to also download & install the new version of editor software as Firmware and

editor software are paired to work together.

1. If you encountered any problem upgrading the firmware, please contact us email us @ [email protected] or [email protected] ↩

2. The latest version(V2.1.12.30) by far requires installation. ↩

3. In case of the included USB-C failed, please try with another USB-C data/sync cable. It's also important to disconnect all other USB MIDI devices and USB

audio devices from you computer before connecting the NUX Trident to your computer. ↩

Tabla de contenidos

Otros manuales de Pedal de música de nux

Manuales populares de Pedal de música de otras marcas

Behringer

Behringer ULTRA WAH UW300 Manual de usuario

Whirlwind

Whirlwind oc-bass Manual de usuario

Strymon

Strymon Lex-rotary Manual de usuario

Behringer

Behringer PB600 Manual de usuario

Lexicon

Lexicon MX200 Manual de usuario

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manual de usuario

Matthews Effects

Matthews Effects Whaler V2 Manual de usuario

Grid 1

Grid 1 Pedal Jeanie Manual de usuario

Amptweaker

Amptweaker tightboost Manual de usuario

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manual de usuario

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manual de usuario

BYOC

BYOC Analog Chorus Manual

Dimavery

Dimavery EPVP-50 Manual de usuario

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manual de usuario

Pro-MIDI

Pro-MIDI G25 Manual de usuario

DW

DW 7000 Manual de usuario

FAMC

FAMC Liquid-Foot Jr. Series Manual de usuario

Dimavery

Dimavery EPOD-50 Overdrive Manual de usuario