Nuvico CT-2M-P30FHIR Manual de usuario

CT-2M-P30FHIR

30x Full-HD IR PTZ DOME

HD-TVI CAMERA

Please read this guide thoroughly before use and keep it handy for future reference.

“Nuvico surveillance equipment is designed to be installed and served only by a

trained, state-licensed professional installer”.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO

NOT INSERT ANY METALLIC OBJECTS THROUGH THE

VENTILATION GRILLS OR OTHER OPENINGS ON THE

EQUIPMENT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC INFORMATION: This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. CAUTION –THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN

THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU

ARE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed

Class 2 power source only.

Table of Contents

Chapter 1 —Introduction..................................................................................................6

1.1 Features...............................................................................................................................6

Chapter 2 —Installation and Configuration....................................................................7

2.1 Package Contents ...............................................................................................................7

2.2 Installation ...........................................................................................................................8

2.2.1 Installation –Wall Mount.............................................................................................. 9

2.2.2 Installation –Ceiling Mount........................................................................................ 10

2.3 Basic Configuration of Dome Camera System................................................................ 11

2.4 Setting Dome Camera Address (ID) ................................................................................. 12

2.5 Setting Dome Camera Video Type, Video Signal & Coaxitron Protocol.........................12

2.6 Connections....................................................................................................................... 13

2.7 Getting Started................................................................................................................... 15

Chapter 3 —Program and Operation.............................................................................16

3.1 Dome Camera Selection.................................................................................................... 16

3.2 Accessing the On-Screen Menu Utility ............................................................................16

3.3 How to control the On-Screen Menu Utility..................................................................... 16

3.4 Auto Scan (Shortcut: SCAN) ............................................................................................ 17

3.5 Preset (Shortcut: PRST) ...................................................................................................19

3.6 Shortcut of Preset Program.............................................................................................. 21

3.7 Tour (Shortcut: TOUR)......................................................................................................21

3.8 Pattern (Shortcut: PTRN).................................................................................................. 23

3.9 Privacy Zone......................................................................................................................24

3.10 Camera Menu................................................................................................................... 25

3.11 Dome Communication..................................................................................................... 29

3.12 Alarm................................................................................................................................30

3.13 Dome Setup ..................................................................................................................... 31

Appendix A —Specifications.........................................................................................38

Appendix B —Troubleshooting.....................................................................................40

PTZ Accessories ..............................................................................................................41

Chapter 1 —Introduction

1.1 Features

The PTZ dome camera and the keyboard controller make up the building blocks for any surveil-

lance/security system. Using multiple keyboard controllers and multiple dome cameras, no place is

too large for monitoring. Extensible and flexible architecture facilitates remote control functions for

a variety of external switching devices such as multiplexers and DVRs.

Built-in optical power zoom camera with True Night Shot function

Built-in Synchronized IR LED & Fixed IR LED: The camera is equipped with two built-in IR LED’s,

fixed one for wide view and zoom synchronized adjustable one for distant view.

240 Preset positions with the individual camera AE setup

8 Tours consist of Presets, Patterns, Auto Scans and other Tours can be programmed with over

300 functions and preset locations. While moving, each Preset scan can be watched in smooth

Vector Scan mode.

16 Auto Scans with the normal, the vector, and the random mode and the endless Auto-Pan with

13 speed steps

8 Patterns (up to 500 seconds) and 8 Privacy Zones

4 Alarm inputs, 2 Alarm outputs (5VTTL)

Variable speed from 0.1/sec. to 380/sec.

Three Variable speed (SLOW, NORMAL, TURBO)

Pan/Tilt speed is inversely proportional to the zoom ratio with the option.

Maximum speed is 380/sec. when Preset command.

Tilt range is -10to 90

Programmable user preferences (alarm, preset, title, etc.)

90Auto Flip

Up to 3999 selectable camera addresses

Function Run menu using DVR without function key (Pattern, Scan …)

Built-in RS-485 receiver driver

24VDC or 24VAC for Dome

Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only.

Chapter 2 —Installation and Configuration

2.1 Package Contents

The PTZ dome camera is designed with compact, small size, hard dome camera housing.

The housing is constructed of aluminum, steel and plastic. The housing is designed to be mounted

on a wall or a ceiling. The housing meets the Protection Classification IP66 standards for dust and

moisture resistance.

* Dome Camera 1

* Instruction Manual (This Document) 1

* Accessory Connector 1

1) 2-Pin Terminal Block (1)

2) 3-Pin Terminal Block (1)

3) 4-Pin Terminal Block (1)

4) 5-Pin Terminal Block (1)

2.2 Installation

You need one optional mount kit of the wall mount and the ceiling mount to install.

The wall or ceiling mount must be attached to a structural object such as hard wood, concrete that

will support the weight of the mount and dome camera.

The use of a solid backboard is recommended when attaching to gypsum walls.

1. Remove the Protection pad and the tape from attached the dome camera.

2. Attach the mounting base to wall using the supplied M8 tapping screw and plastic bushing.

(Ceiling using the supplied M6 tapping screw and bushing)

3. Wind the both thread of the pipe end with Teflon tape about 20 times for sealing. Then use a

silicone rubber sealant to seal the area where the wall (ceiling) mount and the pipe meet.

4. Place a bead of silicone sealant around the wall and ceiling mount mounting flange, press it to

the surface and line up the flange hole with drilled holes.

CAUTION 1: A silicone rubber sealant must be applied to seal the housing to secure

waterproofing.

CAUTION 2: When installing, a bracket must be applied.

2.2.1 Installation –Wall Mount

The wall mounting plate must be attached to a structural object such as concrete that will support

the weight of the mount and Dome Camera.

1. Select a suitable mounting location and verify there is sufficient cable to reach the middle of

the Wall Mount.

2. Mark and drill mounting holes in the surface using the Wall Mount Flange.

3. Pull out cables required to connect to the dome camera from the wall.

4. Set and fix wall mount bracket using plastic anchors and M8x35 screws.

5. Open the access plate and pull out cables through rectangular access hole of the wall mount

bracket.

6. Attach the 1.5 inch adapter to wall mount bracket and fix it using set screw.

7. Attach the camera’s safety wire to the wall mount bracket and organize cables.

8. Close the access plate of the wall mount bracket.

9. Push in and turn clockwise the camera into the adapter, and fix it using set screw of the

adapter.

2.2.2 Installation –Ceiling Mount

The ceiling mounting plate must be attached to a structural object such as concrete that will

support the weight of the mount and Dome Camera.

1. Select a suitable mounting location

and verify there is sufficient cable to

connect with cables from the

housing.

2. Mark and drill mounting holes on the

surface using the ceiling mount

bracket.

3. Pull out cables required to connect

to the dome camera from the ceiling.

4. Attach the ceiling mount bracket

using plastic anchors and screws.

5. Attach 1.5 inch adapter to the pipe

and fix it using set screw of the

adapter.

6. Pull out camera cables through the

pipe and attach the camera to

adapter and fix them using set screw

of the adapter.

7. After safety wire to the pipe to one

of M6x35 screws of the ceiling

mount bracket.

8. Join every connectors and organize

cables.

9. Lock hexagonal nut of the ceiling

mount bracket to fix camera

attached pipe and ceiling mount

bracket.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Nuvico

Nuvico

Nuvico EasyView WDR Series Manual de usuario

Nuvico

Nuvico CB-HDE21N-L Manual de usuario

Nuvico

Nuvico Xcel NCT-4M-E31AF Manual de usuario

Nuvico

Nuvico Xcel NCT-8ML2-OV21AF Manual de usuario

Nuvico

Nuvico Xcel NCT-5ML-OV21AF Manual de usuario

Nuvico

Nuvico Xcel NCT-5ML-B2 Manual de usuario

Nuvico

Nuvico EasyView 2 CD Series Manual de usuario

Nuvico

Nuvico EasyView Lite CD-H2N-I Manual de usuario

Nuvico

Nuvico CD-ST21N Manual de usuario

Nuvico

Nuvico CB-HDE21N Manual de usuario

Nuvico

Nuvico ZoomMatic CI-Z22N-L Manual de usuario

Nuvico

Nuvico CT-2M-D3 Manual de usuario

Nuvico

Nuvico Xcel NCT-5ML-E2 Manual de usuario

Nuvico

Nuvico XCEL NCT-4M-OV2 Manual de usuario

Nuvico

Nuvico Hybrid HD Manual de usuario

Nuvico

Nuvico SD-Z18N-PHW Manual de usuario

Nuvico

Nuvico Easy View 2 CD Series Manual de usuario

Nuvico

Nuvico Xcel NCT-5ML-E21AF Manual de usuario

Nuvico

Nuvico EasyView 2 CD Series Manual de usuario

Nuvico

Nuvico EasyView CD-S266 Manual de usuario

Nuvico

Nuvico CB-HD39N-L Manual de usuario

Nuvico

Nuvico Xcel NCT-8ML2-E21AF Manual de usuario

Nuvico

Nuvico MP-OV22N Manual de usuario

Nuvico

Nuvico CB-HD21N-L Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario