Nortel Secure Router 2330 Manual de usuario
Nortel Secure Router 2330/4134
Installation — SFPs
Release: 10.2
Document Revision: 03.01
www.nortel.com
NN47263-303
.
Nortel Secure Router 2330/4134
Release: 10.2
Publication: NN47263-303
Document release date: 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
While the information in this document is believed to be accurate and reliable, except as otherwise expressly
agreed to in writing NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF
ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are
subject to change without notice.
Nortel, Nortel Networks, the Nortel logo, and the Globemark are trademarks of Nortel Networks.
THE SOFTWARE DESCRIBED IN THIS DOCUMENT IS FURNISHED UNDER A LICENSE AGREEMENT AND
MAY BE USED ONLY IN ACCORDANCE WITH THE TERMS OF THAT LICENSE.
All other trademarks are the property of their respective owners.
.
3
.
Contents
New in this release 5
Features 5
Other changes 5
Introduction 7
Navigation 7
Safety and equipment care information 9
Handling, safety, and environmental guidelines 9
Electrostatic discharge prevention 9
Care of fiber optic equipment 10
Fiber optic cable care 10
Fiber optic connector care 11
Cleaning single connectors 12
Cleaning duplex connectors 13
Cleaning receptacles 14
Product safety warnings and information 16
ESD and installation caution messages 16
Laser safety warnings 17
Small form factor pluggable transceivers 21
Selecting an SFP 21
Job aid 22
Job aid 22
Installing an SFP 23
Job aid 24
Removing an SFP 25
SFP specifications 27
SFP labels 27
General SFP specifications 28
1000BASE-SX (LC) SFP specifications 28
1000BASE-SX (MT-RJ) SFP specifications 29
1000BASE-LX SFP specifications 30
1000BASE-XD CWDM SFP specifications 30
1000BASE-ZX CWDM SFP specifications 31
Nortel Secure Router 2330/4134
Installation — SFPs
NN47263-303 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
.
5
.
New in this release
See the following sections for details about what’s new in Nortel Secure
Router 2330/4134 Installation — SFPs (NN47263-303) for release 10.2.
Features No changes have been made to feature content for this release.
Other changes
This document is updated to include references to the new SR2330
hardware.
Nortel Secure Router 2330/4134
Installation — SFPs
NN47263-303 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
.
6New in this release
Nortel Secure Router 2330/4134
Installation — SFPs
NN47263-303 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
.
7
.
Introduction
This document provides information about small form-factor pluggable
(SFP) transceiver safety and care, SFP selection, and SFP installation.
It also includes SFP specifications.
Navigation •“Safety and equipment care information” (page 9)
•“Small form factor pluggable transceivers” (page 21)
•“SFP specifications” (page 27)
Nortel Secure Router 2330/4134
Installation — SFPs
NN47263-303 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
.
8Introduction
Nortel Secure Router 2330/4134
Installation — SFPs
NN47263-303 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
.
9
.
Safety and equipment care information
This section contains important safety and regulatory information.
Read this section before you install small form factor pluggable (SFP)
transceivers.
Navigation •“Handling, safety, and environmental guidelines” (page 9)
•“Care of fiber optic equipment” (page 10)
•“Product safety warnings and information” (page 16)
Handling, safety, and environmental guidelines
Before you install an SFP, read the following handling, safety, and
environmental guidelines:
•SFPs are static sensitive. For more information about how to prevent
damage from electrostatic discharge (ESD), see “Electrostatic
discharge prevention” (page 9).
•Dust contamination can reduce the performance of optical parts in
SFPs. When you store an SFP, or after you disconnect it from a fiber
optic cable, always keep a dust cover over the optical bore.
•Dispose of this product according to all national laws and regulations.
Electrostatic discharge prevention
To prevent equipment damage, observe the following electrostatic
discharge (ESD) precautions when you handle or install the components.
•Ground yourself and the equipment to an earth or building ground. Use
a grounded workbench mat (or foam that dissipates static charge) and
a grounding wrist strap. The wrist strap must touch the skin and be
grounded through a one megaohm resistor.
•Do not touch anyone who is not grounded.
Nortel Secure Router 2330/4134
Installation — SFPs
NN47263-303 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
.
10 Safety and equipment care information
•Leave all components in their ESD-safe packaging until installation,
and use only a static-shielding bag for all storage, transport, and
handling.
•Clear the area of synthetic materials such as polyester, plastic, vinyl, or
styrofoam because these materials carry static electricity that damages
the equipment.
Care of fiber optic equipment
You must keep fiber optic equipment connections clean and damage-free.
Use the information in this section to properly maintain and care for fiber
optic equipment.
Care of fiber optic equipment navigation
•“Fiber optic cable care” (page 10)
•“Fiber optic connector care” (page 11)
•“Cleaning single connectors” (page 12)
•“Cleaning duplex connectors” (page 13)
•“Cleaning receptacles” (page 14)
Fiber optic cable care
Although the glass fiber in fiber optic cable is protected with reinforcing
material and plastic insulation, it is subject to damage. Use the following
precautions to avoid damaging the glass fiber.
•Do not kink, knot, or vigorously flex the cable.
•Do not bend the cable to less than a 40 mm radius.
•Do not stand on fiber optic cable; keep the cable off the floor.
•Do not pull fiber optic cable harder than you do a cable containing
copper wire of comparable size.
•Do not allow a static load of more than a few pounds on a section of
the cable.
•Place protective caps on fiber optic connectors that are not in use.
•Store unused fiber optic patch cables in a cabinet, on a cable rack, or
flat on a shelf.
Frequent overstressing of fiber optic cable causes progressive
degeneration that leads to failure.
Nortel Secure Router 2330/4134
Installation — SFPs
NN47263-303 03.01 7 September 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
.
Otros manuales para Secure Router 2330
4
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Enrutador de red de Nortel
Nortel
Nortel BayStack 460-24T-PWR Guía de referencia
Nortel
Nortel BayStack 600 Series Manual de usuario
Nortel
Nortel 4050 Manual de usuario
Nortel
Nortel 222 Manual de instrucciones
Nortel
Nortel Secure Router 4134 Manual de usuario
Nortel
Nortel Contivity 1100 Manual de usuario
Nortel
Nortel Secure Router 4134 Manual de usuario
Nortel
Nortel 7 Guía rápida
Nortel
Nortel 8300 Series Manual de operación y mantenimiento
Nortel
Nortel Passport 8600 Series Manual de usuario
Nortel
Nortel Passport 8600 Series Manual del operador
Nortel
Nortel NN46110-602 Instrucciones de funcionamiento
Nortel
Nortel NN46205-310 Manual de usuario
Nortel
Nortel BayStack ARN Dimensiones
Nortel
Nortel Passport 8600 Series Manual de usuario
Nortel
Nortel Secure Router 4134 Manual de usuario
Nortel
Nortel Secure 1001 Manual de usuario
Nortel
Nortel 8300 Series Guía
Nortel
Nortel 1750 Manual de usuario
Nortel
Nortel Contivity 110 Suplemento
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad