Nortel Meridian 1 Option 11C Manual técnico

Meridian 1

Option 11C

Planning and Installation Guide

Document Number: 553-3021-210

Document Release: Standard 7.00

Date: January 2002

Year Publish FCC TM

PrintedinCanada

Information is subject to change without notice. Nortel Networks reserves the right to make changes in design

or components as progress in engineering and manufacturing may warrant. This equipment has been tested

and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules, and the

radio interference regulations of Industry Canada. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at their own expense.

Meridian 1 and Option 11C are trademarks of Nortel Networks.

Page 3 of 408

Option 11C Planning and Installation Guide

Revision history

January 2002

Standard 7.00. This global document is up-issued to include updates and

changes required for Release 25.40.

December 2000

Issue 6.00, Standard. This global document is up-issued to include updates

and changes required for Option 11C IP Expansion with Release 25.3x

software.

April 2000

Issue 5.00, Standard. This guide combines the three Option 11C Planning and

Installation guides for the UK, NTP 553-3021-210UK, Europe, NTP

553-3021-210EU and North America, NTP 553-3021-210, into one global

document for Release 25.0x.

May 1999

Issue 4.0, Standard

March 1998

Issue 3.0, Standard

This guide is reissued to include X11 Release 23.30 information and other

miscellaneous updates.

October 1997

Issue 2.0, Standard

Page 4 of 408

553-3021-210 Standard 7.00 January 2002

The General Information and Planning Handbook (553-3021-200), Standard

1.0 and the Installation Guide (553-3021-210), Standard 1.0 were combined

to form the Planning and Installation Guide. Also contained were sections

(those pertaining to a new installation) from the Software Installation

Program Guide (553-3021-310), Standard 1.0. Updates and requirements for

Release 23 (ISM changes) were also included.

July 1996

Issue 1.0, Standard

Page 5 of 408

Option 11C Planning and Installation Guide

Contents

Aboutthisguide ........................... 7

OverviewoftheOption11C .................. 9

Equipmentidentification .................... 15

Systemandsiterequirements ................ 35

Regulatoryinformation...................... 75

Importantsafetyinstructions................. 85

Bracing cabinets against earthquakes . . . ...... 91

Preparingforinstallation .................... 99

InstallationProcedures...................... 101

Mountingthecabinets ...................... 115

Installing the system ground . ................ 125

Installing the power supplies . ................ 131

Installing System Controller Cards . ........... 143

Installing and connecting cross-connect

terminalstocabinets ....................... 169

Page 6 of 408

553-3021-210 Standard 7.00 January 2002

Installing power fail transfer units ............ 181

Installing the circuit cards . . . ................ 187

Installing and connecting reserve power supplies 199

Installing and connecting SDI and

ethernetports ............................. 213

Systemsoftwareinstallation ................. 233

Connectingthetelephones .................. 247

Connectingthetrunks ...................... 277

Connectinganexternalalarm ................ 307

Pre-programmeddata ...................... 313

Changingpre-programmeddata.............. 387

Expansion cabinet as a power shelf

for auxiliary processors ..................... 405

Page 7 of 408

Option 11C Planning and Installation Guide

About this guide

This document is a global document. Contact your system supplier or your

Nortel Networks representative to verify that the hardware and software

described is supported in your area.

The Option 11C Planning and Installation (553-3021-210) is intended for

Meridian 1 Option 11C new system planning and installation personnel.

This Nortel Networks Publication (NTP) is a useful reference tool for

first-time installations as it provides valuable information for the planning

and installation of the Option 11C system. The planning chapters describe the

general design, features, limits, and site requirements of the Option 11C

system. The installation chapters give complete installation instructions and

outline the process of installing a new Option 11C main cabinet system and

expansion cabinets, if required.

IMPORTANT

If performing a new installation of an Option 11C system, follow the

procedures described in this guide. If upgrading from an Option 11 or

11E to an Option 11C system, follow the steps outlined in the Option

11C and 11C Mini Upgrade Procedures (553-3021-250). Detailed

technical information is contained in the optional Option 11C and 11C

Mini Technical Reference Guide (553-3011-100)

Page 8 of 408 About this guide

553-3021-210 Standard 7.00 January 2002

Page 9 of 408

Option 11C Planning and Installation Guide

Overview of the Option 11C

Contents

This section contains information on the following topics:

Reference list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Design and architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Easy to install and program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Fully featured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Option 11C with IP Connectivity . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Increased Digital Trunking/SDI Capacity . . . . . . . . . . . . . . . . . . . . . . . 13

Survivable IP Expansion Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Voice Distribution over Campus Data Network . . . . . . . . . . . . . . . . . . 14

Support of Option 11C Mini Cabinetry . . . . . . . . . . . . . . . . . . . . . . . . . 14

Package Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Reference list

The following are the references in this section:

•Set-Based Administration (553-3001-303)

General information

This chapter provides an overview of the Option 11C system for first-time

installations. It covers general design and features as well providing unique

system information.

Page 10 of 408 Overview of the Option 11C

553-3021-210 Standard 7.00 January 2002

Design and architecture

The Option 11C is a small wall- or floor-mounted digital system which can

be configured as a system with up to five cabinets.

Up to four expansion cabinets can be connected to the main cabinet using

fiber optic cable or 100BaseT/F cable. The expansion cabinets can be located

up to 3 km (1.8 mi.) from the main cabinet. With the introduction of IP

connectivity, IP expansion cabinets can now be distributed over a campus

data network.

Call processing, serial ports and network traffic are handled by an MC68040

processor located on the Small System Controller (SSC) card in the main

cabinet. Performance is significantly increased in comparison with previous

Option 11 systems.

The Option 11C uses global software found in other members of the Meridian

1 family. It can be configured as a key system or as a Private Branch

Exchange (PBX).

Line cards and trunk cards used in the Option 11C are the same as those used

in other Meridian 1 systems, with the addition of some specially designed

cards used in the Option 11C system.

The Option 11C can be configured as a non-blocking system as it does not

need to be provisioned for speech paths or timeslots.

Easy to install and program

The system is shipped with a Software Daughterboard which is

pre-configured with system and customer data.

The Software Installation Program is automatically invoked during first-time

installation of the Option 11C system. This is a menu driven program which

installs the software and makes the Option 11C operational.

Model telephones

The user has a variety of pre-programmed model telephone layouts from

which to choose. Using telephone layouts or templates, technicians can

perform a few simple steps at installation to activate multiple telephones.

Otros manuales para Meridian 1 Option 11C

Tabla de contenidos

Otros manuales de Sistema de conferencias de Nortel

Nortel

Nortel BCM200 Manual de usuario

Nortel

Nortel NN42030-107 Manual de usuario

Nortel

Nortel Meridian 1 Mini-Carrier Remote Instrucciones de funcionamiento e instalación

Nortel

Nortel NN42030-101 Manual de usuario

Nortel

Nortel Meridian Meridian 1 Manual de usuario

Nortel

Nortel Meridian Norstar Manual de usuario

Nortel

Nortel 3100 Series Manual de usuario

Nortel

Nortel BCM50 Manual del producto

Nortel

Nortel NN42030-102 Manual de usuario

Nortel

Nortel Agent Greeting 2.0 Instrucciones de funcionamiento

Nortel

Nortel DMS-100 Series Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario