Norac UC5 Topcon X30 Manual de usuario
Spray Height
C
ontroller
HARDI DAH09 V.G.
Installation Manual
HD06
Printed in Canada
Copyright 2009 by NORAC Systems International Inc.
Reorder P/N: UC5-BC-HD06-INST Rev C (HARDI)
NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without
the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information contained in this
manual. The technical information in this manual was reviewed at the time of approval for publication.
Contents
1Introduction..........................................................................................................1
2General UC5 System Layout................................................................................2
3Kit Parts................................................................................................................3
4Pre-Install Checklist.............................................................................................8
5Ultrasonic Sensor Installation............................................................................10
6Roll Sensor Installation ......................................................................................19
7Module Installation.............................................................................................22
8Connecting the Sensors to the CANbus.............................................................26
9Hydraulic Installation ........................................................................................27
10 Software Setup....................................................................................................34
11 Cable Drawings...................................................................................................35
12 Valve Block Stencil.............................................................................................39
1
1 Introduction
Congratulations on your purchase of the NORAC UC5 Spray Height Controller. This system is
manufactured with top quality components and is engineered using the latest technology to
provide operating reliability unmatched for years to come.
When properly used the system can provide protection from sprayer boom damage, improve
sprayer efficiency, and ensure chemicals are applied correctly.
Please take the time to read this manual completely before attempting to install the system. A
thorough understanding of this manual will ensure that you receive the maximum benefit from
the system.
Your input can help make us better! If you find issues or have suggestions regarding the parts
list or the installation procedure, please don’t hesitate to contact us.
Phone: 1 800 667 3921 Canada (Toll Free)
1 866 306 6722 United States (Toll Free)
(+33) 06 03 87 80 78 Europe
(+1) 306 664 6711 All other regions
E-mail: service@norac.ca
Web: www.norac.ca
Every effort has been made to ensure the accuracy of the information contained in this
manual. All parts supplied are selected to specially fit the sprayer to facilitate a complete
installation. However, NORAC cannot guarantee all parts fit as intended due to the
variations of the sprayer by the manufacturer.
Please read this manual in its entirety before attempting installation.
2
2 General UC5 System Layout
Figure 1 illustrates the general layout of the UC5 system components:
Figure 1: General UC5 System Layout
3
3 Kit Parts
3.1 Kit Overview
Figure 2: HD06 System Parts
4
3.2 Hydraulic Plumbing
Figure 3: HD06 Hydraulic Plumbing
5
3.3 List of Parts (Order according to Item Number)
Item Part Number Name Quantity
P01 106034 UC5 NETWORK 2 PIN PLUG 4
P02 106035 UC5 NETWORK 12 PIN PLUG (A-KEY) 1
P03 105882 UC5 NETWORK 6 PIN PLUG 2
C04 43210-01 CABLE UC5 NETWORK 18 AWG 1M 2
C05 43210-20 CABLE UC5 NETWORK 18 AWG 20M 2
C01 43220-03 CABLE UC5 NETWORK 14 AWG 3M 1
C02 43220-10 CABLE UC5 NETWORK 14 AWG 10M 1
C10 43230-04 CABLE UC5 VALVE 2PIN DT TO 2PIN DT 4
C20 43240-30 CABLE UC5 BC HARDI DAH09 1
E01 43710 UC5 CONTROLLER MODULE 1
E02 43720 UC5 VALVE MODULE 1
E03 43732 UC5 INPUT MODULE PASS THRU 1
E04 43740 UC5 ROLL SENSOR 2
E05 43750 UC5 ULTRASONIC SENSOR 3
E11* 43765 UC5 NETWORK COUPLER 8-WAY 1
E12 43764 UC5 NETWORK COUPLER 2-WAY 1
E20* 43764T UC5 NETWORK COUPLER 2-WAY WITH TERMINATOR 2
B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7.5 IN 1
B10 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY EXTENDED 2
B11 44695-15 MOUNTING BRACKET UC4 SENSOR HARDI COMMANDER ML 1
B14 100610 BOLT HEX 3/8X1 STAINLESS STEEL 1
B15 100947 WASHER LOCK SPRING SS 3/8 IN 1
H20 44865-43 HYDRAULICS FITTING KIT - HD4 1
M02 UC5-BC-HD06-INST MANUAL INSTALLATION UC5 HARDI DAH09 1
* See Substitution Parts
6
3.4 Substitution Parts
Substitution parts will in no way affect the operation of the system provided that they are
installed as directed.
Item E11 – 8-way coupler (43765) may be substituted with:
Item Part Number Name Quantity
E11* 43762 UC5 NETWORK COUPLER 6-WAY 1
43765 43762
43765 Replaced with a 43762
Item E20 – 2-way coupler with terminator (43764T) may be substituted with:
Item Part Number Name Quantity
E10 43760 UC5 NETWORK COUPLER 3-WAY 2
E20* 43780 UC5 NETWORK TERMINATOR 2
Install the UC5 Network Terminator (E20*) into the third connector on the UC5 Network 3-way
Coupler (E10) (shown below). It is now a drop-in replacement for the 43764T (E20).
43764T Replaced with a 43760 and 43780
7
3.5 Hydraulic Fitting Kit Details (P/N: 44865-43)
Item Part Number Name Quantity Picture
F02 501304 COUPLING HYD 6MB 4MBSPP 4
F03 104369 COUPLING HYD 6MBP 2
F01 44928 ORIFICE INSERT .047 IN ONE WAY 4
6 M B - 6 M OR X 90
SIZE IN
1/16TH'S
GENDER: MALE
OR FEMALE
90° ANGLE
SWIVEL
TYPE
GENDER
SIZE
TYPE:
B - ORB
J - JIC
OR - FLAT
FACE
P - PIPE
Fitting Name
Example:
The use of dielectric grease is not recommended on any NORAC electrical connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of the
supplied Permatex Anti-seize grease to all threaded parts upon installation. Permatex Anti-
seize lubricant is preferred, but other similar anti-seize products may be used.
3.6 HARDI Supplied Kit
The required HARDI Parts necessary for the UC5 install are listed below.
Item Part Number Name Quantity
HARDI01 232109 1/4" BSP FITTING 4
HARDI02 784030 4FBSP-4FBSP HYD HOSE (350MM LENGTH) 2
HARDI03 784022 4FBSP-4FBSP HYD HOSE (650MM LENGTH) 2
HARDI06 284846 CABLE TIES 175
Otros manuales para UC5 Topcon X30
55
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Controladores de Norac
Norac
Norac UC4+ Case 44 Series Manual de usuario
Norac
Norac UC4 Plus Rogator 64 Series Manual de usuario
Norac
Norac NITRO Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC4+ Hardi OEM Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC4+ TA 1200 Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC4+ Roll Control Manual de usuario
Norac
Norac UC4+ Manual de usuario
Norac
Norac UC5 Topcon X30 Manual de usuario
Norac
Norac UC4+ Roll Control Manual de usuario
