Norac PULSE UC5 Manual de uso y cuidado

UC5 PULSETM Firmware Update Instructions:

1. Ensure that the PULSE is connected as shown below. Connect the control module to a 12V

power supply.

2. Ensure that the switch on the PULSE is in the OFF position (bottom of switch pressed in).

Remove the plugs from the USB connector and the Prog. switch.

3. Unzip and copy all of the firmware update files onto the root directory of a USB drive.

NOTE: The USB drive must be USB 2.0 or higher.

4. Insert the USB drive loaded with the firmware update into the USB connector on the backshell.

5. Insert a thin object into the Prog. hole on the back of the display to press in the programming

button.

6. Turn on the power supply. Move the PULSE switch to the ON position (top of the switch

pressed in). The PULSE and control module should both turn on. Ensure that the

programming button is pressed in when powering up.

NOTE: Do not turn on the power if the USB drive is not connected and the

programming switch is being pressed. This will damage the display.

NOTE: Do not turn off the power while updating software. It may cause fatal damage

to the modules or display.

The Maintenance screen will display.

The display will begin programming. Once this

screen is shown, release the programming switch.

A

fter the display is programmed, a

t

ouch screen

calibration prompt will appear. Touch the center of

each crosshair (there will be five (5)) with a stylus.

The crosshairs will appear one at a time; all are

shown in the graphic for reference.

It is important to touch each quickly as lingering on

one will register as the touch for the next. If one is

missed, the screen will not function properly and

the display must be reprogrammed.

While the program is loading, the NORAC main

screen will be shown.

Once the program is loaded, the NORAC UC5

Liability screen will be displayed. The program may

take up to a minute to load. Press the check button

to continue.

7. Remove the USB drive from the PULSE.

1 2

5

3

4

Tabla de contenidos

Otros manuales de Sistema de control de Norac

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC4+ Manual de usuario

Norac

Norac RG11 Manual de usuario

Norac

Norac UC4+ Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC5 MAX Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC7 Manual de usuario

Norac

Norac SPRA-COUPE 7000 Series Manual de usuario

Norac

Norac John Deere 4720 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC4+ Apache 2010+ Manual de usuario

Norac

Norac UC7 Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Norac

Norac UC5 Active Roll Control Manual de usuario

Norac

Norac UC5-CAB-HG06-HG07 Manual de usuario

Norac

Norac UC5 Rogator 600 Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC4.5 Manual de usuario

Norac

Norac UC4 Total Control Manual de usuario

Norac

Norac UC5 Topcon X30 Manual de usuario

Manuales populares de Sistema de control de otras marcas

Pentair Pool Products

Pentair Pool Products Compool Manual de usuario

ComfortNET

ComfortNET CTK04 Manual de usuario

Fireye

Fireye InSight II 95DSS3 Manual de usuario

CAME

CAME G3000 Manual de usuario

Idemia

Idemia MorphoAccess VP MD Manual de usuario

Axis

Axis P1445-LE-3 Manual de usuario

HEIDENHAIN

HEIDENHAIN TNC 150 B Manual de usuario

CNC-Step

CNC-Step High-Z T-Series Manual de usuario

Doosan

Doosan DVF Series Manual de usuario

Honeywell

Honeywell KAP 140 Manual de usuario

Honeywell

Honeywell vk41 series Manual de usuario

AirBench

AirBench FPW Guía de instalación

Cypress

Cypress HHR-3160 Manual de usuario

CAME

CAME GLT40AOS Manual de usuario

Zonex

Zonex GEN II -VVT Guía del usuario

Altronics

Altronics K 9650 Manual de usuario

micro-trak

micro-trak RoadMaster Manual de usuario

micro-trak

micro-trak Calc-An-Acre II Manual de usuario