Nokia BH-608 Manual de usuario

Nokia Bluetooth Headset BH-608

8910

Issue 1.0

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that

this BH-608 product is in compliance with

the essential requirements and other

relevant provisions of Directive 1999/5/EC.

A copy of the Declaration of Conformity can

be found at http://www.nokia.com/

phones/declaration_of_conformity/.

Nokia, Nokia Connecting People and the

Nokia Original Accessories logo are

trademarks or registered trademarks of

Nokia Corporation. Nokia tune is a sound

mark of Nokia Corporation. Other product

and company names mentioned herein

may be trademarks or tradenames of their

respective owners.

Reproduction, transfer, distribution, or

storage of part or all of the contents in this

document in any form without the prior

written permission of Nokia is prohibited.

Nokia operates a policy of continuous

development. Nokia reserves the right to

make changes and improvements to any of

the products described in this document

without prior notice.

Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

The contents of this document are provided

"as is". Except as required by applicable law,

no warranties of any kind, either express or

implied, including, but not limited to, the

implied warranties of merchantability and

fitness for a particular purpose, are made in

relation to the accuracy, reliability or

contents of this document. Nokia reserves

the right to revise this document or

withdraw it at any time without prior

notice.

To the maximum extent permitted by

applicable law, under no circumstances

shall Nokia or any of its licensors be

responsible for any loss of data or income

or any special, incidental, consequential or

indirect damages howsoever caused.

The availability of particular products may

vary by region. Please check with your

Nokia dealer for details. This device may

contain commodities, technology or

software subject to export laws and

regulations from the US and other

countries. Diversion contrary to law is

prohibited.

ENGLISH

Introduction

With the Nokia Bluetooth Headset

BH-608, you can make and answer

calls hands-free with your

compatible mobile device. The

headset is provided with digital

signal processing (DSP) noise

cancellation that helps you handle

calls in noisy environments.

Read this user guide carefully before

using the headset. Also, read the

user guide for the device that you

connect to the headset.

This product may contain small

parts. Keep them out of the reach of

small children.

Note: The surface of this

device does not contain nickel in the

platings. The surface of this device

contains stainless steel.

Bluetooth wireless

technology

Bluetooth wireless technology

allows you to connect compatible

devices without cables. The headset

and the other device do not need to

be in line of sight, but they should be

within 10 metres (33 feet) of each

other. Connections may be subject to

interference from obstructions, such

as walls, or other electronic devices.

This device is compliant with Bluetooth

Specification 2.1 + EDR supporting the

following profiles: Headset Profile 1.1

and Hands-Free Profile 1.5. Check with

the manufacturers of other devices to

determine their compatibility with this

device.

ENGLISH

Get started

The headset contains the following

parts shown on the title page:

earpiece (1), microphone (2), mute

key (3), answer/end key (4), charger

connector (5), volume up key (6),

volume down key (7), clip (8),

indicator light (9), and power key

(10).

Before using the headset, you must

charge the battery and pair the

headset with a compatible device.

Parts of the device are magnetic.

Metallic materials may be attracted to

the device. Do not place credit cards or

other magnetic storage media near the

device, because of information stored

on them may be erased.

Charge the battery

Before charging the battery,

carefully read "Battery and charger

information".

Warning: Use only chargers

approved by Nokia for use with this

particular model. The use of any other

types may invalidate any approval or

warranty, and may be dangerous. Use of

unapproved chargers may present a risk

of fire, explosion, or other hazard.

When you disconnect the power cord of

any accessory, grasp and pull the plug,

not the cord.

1. Connect the charger to a wall

outlet.

2. Connect the charger cable to the

charger connector. The red

indicator light is displayed during

charging.

Charging the battery fully may

take up to 1 hour. Charging the

battery for 15 minutes provides

up to 3 hours and 30 minutes of

talk time.

ENGLISH

If the ambient temperature falls

below 0°C (32°F) or exceeds 55°C

(131°F), charging stops

temporarily until the

temperature rises to 0°C (32°F) or

falls below 55°C (131°F).

3. When the battery is fully charged,

the green indicator light is

displayed. Disconnect the charger

from the headset, then from the

wall outlet.

The fully charged battery has power

for up to 8 hours of talk time or up to

200 hours of standby time.

To check the battery charge when

the headset is not connected to a

charger, press the power key when

the headset is connected to a mobile

device. If the indicator light is green,

the charge level is sufficient. If the

light is yellow, you may need to

recharge the battery soon. If the

light is red, recharge the battery.

When the battery charge is low, the

headset beeps every 5 minutes and

the red indicator light flashes.

Switch on or off

To switch on, press and hold the

power key for about 2 seconds. The

headset beeps, and the green

indicator light flashes slowly while

the headset tries to connect to the

last one or two connected devices.

When the headset is connected to at

least one device and is ready for use,

the blue indicator light flashes

slowly. If the headset has not been

paired with a device, it automatically

enters pairing mode.

To switch off, press and hold the

power key for about 2 seconds. The

headset beeps, and the red indicator

light is briefly displayed. If the

headset is not connected to a device

within about 30 minutes, it switches

off automatically.

ENGLISH

Pair and connect the

headset

Before using the headset, you must

pair and connect it to a compatible

device.

You can pair the headset with up to

eight devices, but you can only

connect it to a maximum of two

devices at a time.

1. Ensure that your mobile device is

switched on and the headset is

off.

2. If the headset has not been

previously paired with a device,

switch on the headset. The

headset enters pairing mode, and

the blue indicator light starts to

flash quickly.

If the headset has been previously

paired with a device, ensure that

the headset is switched off, and

press and hold the power key for

about 5 seconds until the blue

indicator light starts to flash

quickly.

3. Within about 3 minutes, activate

the Bluetooth feature on your

device, and set it to search for

Bluetooth devices. For details, see

the user guide of your mobile

device.

4. Select the headset from the list of

found devices.

5. If necessary, enter the passcode

0000 to pair and connect the

headset to your device.

In some devices, you may need to

make the connection separately

after pairing.

When the headset is connected to at

least one device and is ready for use,

the blue indicator light flashes

slowly.

To manually connect the headset to

the last used device, press and hold

the answer/end key for about 2

seconds (when no other device is

ENGLISH

connected), or make the connection

in the Bluetooth menu of the device.

You may be able to set your device so

that the headset connects to it

automatically. To activate this

feature in a Nokia device, change the

paired device settings in the

Bluetooth menu.

Basic use

Change the earpad

The headset may be provided with

different sized earpads. Select the

earpad that fits the best and is the

most comfortable for your ear.

To change the earpad, pull the

current earpad from the earpiece,

and push the new earpad into place.

Wear the headset

Use the clip to attach the headset to

your clothing (12).

To use the headset for calling, gently

push the earpiece into your ear.

To have the earpiece within easy

reach when you are not using the

headset, insert the earpiece cable

between the headset and the clip

(11).

Adjust volume

To adjust the volume, press the

volume up or down key. To adjust

the volume quickly, press and hold

the key.

The selected volume level is saved

for the device that is currently

connected to the headset.

Calls

To make a call, use your mobile

device in the normal way when the

headset is connected to it.

To redial the number you last called

(if your mobile device supports this

ENGLISH

feature with the headset), when no

call is in progress, press the answer/

end key twice.

To activate voice dialling (if your

mobile device supports this feature

with the headset), when no call is in

progress, press and hold the answer/

end key for about 2 seconds. Proceed

as described in the user guide of the

mobile device.

To answer or end a call, press the

answer/end key. To reject a call,

press this key twice.

To mute the microphone during a

call, slide the mute key towards the

microphone. To unmute, slide the

key to the opposite direction.

To switch a call between the headset

and a compatible connected device,

press and hold the answer/end key

for about 2 seconds.

Manage two calls

To manage two calls with the

headset at the same time, your

mobile device must support the

Bluetooth Hands-Free Profile 1.5,

and call waiting must be activated in

the device. Call waiting is a network

service and is available when the

headset is connected to only one

device.

To answer a waiting call and end the

active call, press the answer/end key.

To answer a waiting call and put the

active call on hold, press and hold the

answer/end key for about 2 seconds.

To end the active call and make the

call on hold active, press the answer/

end key.

To switch between the active call

and the call on hold, press and hold

the answer/end key for about 2

seconds.

Activate or deactivate

vibration

You can set the headset to vibrate

and flash the indicator light when

you receive a call.

ENGLISH

By default, the vibration and the

indicator light are activated. To

deactivate the vibration and the

light, press and hold the answer/end

key and the volume down key for

about 5 seconds when the headset is

connected to a device.

To activate the vibration and the

light, press and hold the answer/end

key and the volume up key for about

5 seconds.

Use the headset with two

connected devices

You can connect the headset to two

devices at the same time.

To pair the headset to a second

device, see "Pair and connect the

headset".

Allow connection to two devices

By default, the headset can only be

connected to one device at a time. To

allow the headset to connect to two

devices, switch off the headset, and

press and hold the power key and

the volume up key for about 5

seconds. The green indicator light

flashes once.

To allow the headset to connect to

only one device, switch off the

headset, and press and hold the

power key and the volume down key

for about 5 seconds. The yellow

indicator light flashes once.

Handle calls

If the headset can connect to two

devices at the same time and you use

redialling or voice dialling, the call is

made on the device that you last

used to make a call when the

headset was connected to it.

To answer a call on the second

connected device and end the active

call on the first device, press the

answer/end key.

To answer a call on the second

connected device and put the active

call on hold on the first device, press

ENGLISH

Tabla de contenidos

Otros manuales de Auriculares de Nokia

Nokia

Nokia BH-217 Manual de usuario

Nokia

Nokia BH-121 Manual de usuario

Nokia

Nokia BH-500 Manual de usuario

Nokia

Nokia BH105 - Bluetooth Headset Ice Manual de usuario

Nokia

Nokia BH-218 Manual de usuario

Nokia

Nokia HS 26W - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH-208 Manual de usuario

Nokia

Nokia 9232254 Manual de usuario

Nokia

Nokia hs-13w - Wireless Image Headset Manual de usuario

Nokia

Nokia BH-500 Manual de usuario

Nokia

Nokia 02704X5 Manual de usuario

Nokia

Nokia HS-12W Manual de usuario

Nokia

Nokia HS-54W - Headset - Over-the-ear Manual de usuario

Nokia

Nokia BH 301 - Headset - Over-the-ear Manual de usuario

Nokia

Nokia HDW 2 Manual de usuario

Nokia

Nokia HS-16 Manual de usuario

Nokia

Nokia HS-54W - Headset - Over-the-ear Guía de inicio rápido

Nokia

Nokia WH 600 - Headset - Binaural Manual de usuario

Nokia

Nokia BH-210 Manual de usuario

Nokia

Nokia HS-56W Manual de usuario

Nokia

Nokia WH-500 Manual de usuario

Nokia

Nokia BH-203 Manual de usuario

Nokia

Nokia HS-16 Manual de usuario

Nokia

Nokia BH-800 Manual de usuario

Manuales populares de Auriculares de otras marcas

Sena

Sena SMH10 Manual de usuario

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manual de usuario

Sennheiser

Sennheiser EPOS ADAPT 230 Manual de usuario

Doro

Doro Flexus HS2005 Manual de usuario

GE 98971 Manual de usuario

Hama

Hama 00184070 Manual de usuario

Plantronics

Plantronics Blackwire 3200 Series Manual de usuario

Blue Tiger

Blue Tiger Advantage PLUS Manual de usuario

Jawbone

Jawbone Icon Manual de usuario

Jabra

Jabra FR 20 Manual de usuario

Roxcore

Roxcore Flow A+ Manual de usuario

Turtle Beach

Turtle Beach XP 510 Manual de usuario

Philips

Philips SHB6101 Manual de usuario

Jabra

Jabra PRO 9460 Duo Manual de usuario

HyperX

HyperX HyperX Cloud Flight Manual de usuario

Bose

Bose MIE2 Mobile Manual de usuario

Jabra

Jabra Steel Manual de usuario

HyperX

HyperX cloud ii Manual de usuario