Nikon Forestry Pro II Manual de usuario

Instruction manual/Manuel d’utilisation

Laser Rangefinder/Télémètre laser

CONTENTS

English

Introduction

Read this first.......................................................................4

SAFETY AND OPERATION PRECAUTIONS..................5

Description of parts and indicators

Nomenclature/Composition..........................................8

Indicators ..............................................................................9

Inserting the battery

Type of battery................................................................. 11

Inserting the battery...................................................... 11

Battery level indicator ................................................... 11

Navigating the menus

Changing the distance display unit (F1)................. 12

Changing the target priority mode (F2) ................. 13

Changing the external display backlight level

(F3)........................................................................................ 14

Enabling or disabling the log function (F4)........... 15

Viewing the log list (F5)................................................ 16

Deleting all logs (F6)...................................................... 17

Operation diagram of the setting menus .............. 18

Measurement

Adjusting the focus of the internal display............ 19

The measurement display mode............................... 20

Changing the measurement display mode........... 21

Measuring.......................................................................... 22

Measuring with 2 points mode.................................. 23

Measuring with 3 points mode.................................. 24

Technical notes

Specifications ................................................................... 25

Troubleshooting/Repair ............................................... 28

Introduction

 Read this first

Thank you for purchasing the Nikon Laser Rangefinder.

Before using the product, read this manual thoroughly to ensure proper use.

After reading this manual, keep it in a readily accessible place for future reference.

lAbout the manual

• No part of the manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form, by any means, without Nikon’s prior written permission.

• Illustrations and display content shown in this manual may differ from the actual product.

• Nikon will not be held liable for any errors this manual may contain.

• The appearance, specifications, and capabilities of this product are subject to change without notice.

lAbout measurement results

This device is a basic rangefinder. Its measurement results cannot be used as official evidence.

lAbout controls for radio interference

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules and to EU EMC directive. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Notice for customers in Canada

CAN ICES-3(B)/NMB-3(B)

 SAFETY AND OPERATION PRECAUTIONS

Strictly observe the guidelines

contained in this manual in

order to use this product safely

and prevent possible injury or

property damage to you and

others. Understand the contents

thoroughly for correct use of the

product.

WARNING

This indicates that improper use by

ignoring the contents described

herein can result in potential death

or serious injury.

CAUTION

This indicates that improper use by

ignoring the contents described

herein can result in potential injury

or material loss.

SAFETY PRECAUTIONS (Laser)

This product uses an invisible laser

beam. Be sure to observe the

following:

WARNING

• Do not press the PWR button while

looking into the laser emission

aperture. You may damage your

eyes.

• Do not aim at eyes.

• Do not point the laser at people.

• Do not look at lasers with other

optical instruments such as lenses

or binoculars. You may damage

your eyes.

• When not measuring, keep your

fingers away from the PWR button

to avoid accidentally emitting the

laser.

• When not in use for an extended

period, remove the battery.

• Do not disassemble, remodel, or

repair the product. The laser

emission may be harmful to your

health. If the product is

disassembled, remodeled, or

repaired, it is no longer

guaranteed by the manufacturer.

• Store the product in a place out of

reach of children.

SAFETY PRECAUTIONS

(Monocular)

WARNING

• Never look directly at the sun,

intense light, or lasers while using

this product. It may seriously

damage the eyes or cause

blindness.

CAUTION

• Keep the plastic bag used to wrap

this product or other small parts

out of reach of children. The bag

may block their mouths and noses

and cause them to suffocate.

• Be careful of children inadvertently

swallowing small parts or

accessories. If children swallow

such parts, see a doctor

immediately.

• Turn off this product when not in

use.

• When carrying this product, store

it in the case.

• If this product fails to operate

correctly for any reason,

discontinue use immediately and

consult with a Nikon authorized

service representative.

• Do not leave this product in an

unstable place. It may fall and

cause injury or malfunction.

• Do not use this product while

walking. You may walk into

something or fall and cause injury

or malfunction.

• Do not swing this product by the

strap. You may hit others and

cause injury.

• The rubber parts of this product

(such as the eyecup) or rubber

parts of the included case and

strap may deteriorate if used or

stored for a long period of time.

The deteriorated rubber may

attach on clothes and cause stains.

Check their condition before use,

and consult with a Nikon

authorized service representative

if a defect is found.

• Using the rubber eyecup for

extended periods of time may

cause skin inflammation. If you

develop any symptoms, stop use

and see a doctor immediately.

PRECAUTIONS

(Lithium battery)

Incorrect use may cause the lithium

battery to rupture or leak, which will

corrode the device or stain your

hands and clothing.

Be sure to observe the following:

• Install the battery with the + and

– poles positioned correctly.

• Remove the battery when this is

depleted or will not be used for

extended periods.

• Keep the battery away from fire or

water. Never disassemble the

battery.

• Do not charge the lithium battery.

• Do not short the terminal of the

battery chamber.

• Do not carry the battery together

with keys or coins in a pocket or

bag. You may short the battery and

cause overheating.

• If liquid leaked from the lithium

battery comes into contact with

clothing or skin, rinse with plenty

of water. If it enters the eyes or

mouth, rinse with water and

consult a doctor immediately.

• When disposing of the lithium

battery, follow your local area

regulations.

HANDLING AND OPERATION

PRECAUTIONS

• Do not subject this product to

physical shock.

• If you accidentally apply strong

physical shock or drop the product

and suspect a malfunction, consult

with your local dealer or a Nikon

authorized service representative

immediately.

• Do not use the product

underwater.

• Wipe off any rain, water, sand, or

mud on the product as soon as

possible with a soft, clean cloth.

• When this product is exposed to

extreme temperature changes

(suddenly brought from a cold

place to a warm place or vice-

versa), the lens surfaces may get

cloudy. Do not use the product

until the cloudiness has

disappeared.

• Do not leave the product in a car

on a hot or sunny day, or near heat

generating equipment.

• Do not leave the

eyepiece in direct

sunlight. The

condenser effect of

the lens may

damage the internal

display surface.

CARE AND MAINTENANCE

PRECAUTIONS

LENS

Be careful that you do not directly

touch the lens surface with your

hands when cleaning it. Remove

dust or lint with a blower*. For

fingerprints or other stains that

cannot be removed with a blower,

wipe the lens with a dry soft cloth or

cleaning cloth for eyeglasses, using a

spiral motion that starts at the center

of the lens and working towards the

edges. Wiping too firmly or wiping

with a hard material may damage

the lens. If this fails, gently wipe the

lens using a cloth lightly dampened

with commercial lens cleaner.

MAIN BODY

After gently removing dust with a

blower, clean the body surface with a

soft, clean cloth. After use at a

seaside, wipe off salt that may be on

the body surface with a damp, soft,

clean cloth, and then wipe with a dry

cloth. Do not use benzene, thinner,

or other cleaners containing organic

solvents.

STORAGE

Water condensation or mold may

occur on lens surfaces because of

high humidity. Therefore, store the

product in a cool, dry place. After use

on a rainy day or at night, thoroughly

dry it at room temperature, then

store in a cool, dry place.

* A rubber cleaning tool that blows

air from a nozzle.

En Symbol for separate collection applicable

in European countries

This symbol indicates that this battery is

to be collected separately.

The following apply only to users in

European countries.

• This battery is designated for

separate collection at an appropriate

collection point. Do not dispose of as

household waste.

• For more information, contact the

retailer or the local authorities in

charge of waste management.

En Symbol for separate collection applicable

in European countries

This symbol indicates that this product is

to be collected separately.

The following apply only to users in

European countries.

• This product is designated for

separate collection at an appropriate

collection point. Do not dispose of as

household waste.

• For more information, contact the

retailer or the local authorities in

charge of waste management.

 Nomenclature/Composition

b87

WATERPROOF 6x21

Composition

• Body ×1

• Case ×1

• Strap ×1

• Lithium battery (CR2) ×1

1MODE button

2PWR button (POWER ON/Measurement

button)

36× monocular eyepiece

4Eyecup/Diopter adjustment ring

5Diopter index

6Strap eyelet

7Battery-chamber cover

8Battery-chamber cover “Open” indication

9Monocular objective lens/Laser emission

aperture

0External display

aInvisible laser detector aperture

bProduct number label

cIndication

Description of parts and indicators

 Indicators

lInternal display

1Measurement display mode*1

2Distance or angle*2 (sub-indicator)

: “Failed to measure”or “Unable to measure”

3Unit of measure (°: angle in degrees/m: meter/YD: yard/ft: feet)

4Target mark

: Aim at the target you want to measure.

Position the target at the center of the mark.

5Laser emission mark

: Appears while the laser is being emitted for a

measurement. Do not look towards the objective lens

side while this mark is shown.

6Unit of measure (m: meter/YD: yard/ft: feet)

7Target Priority mode (1st: First Target Priority mode/

Dst: Distant Target Priority mode)

8Battery level indicator

9Log indicator*3

0Distance or height*2 (main indicator)

: “Failed to measure” or “Unable to measure”

*1 See page 20 for more information.

*2 Varies depending on the measurement display mode.

*3 See “Log indicator” (page 10) and “Enabling or disabling the log function (F4)”(page 15) for more

information.

• The internal display of this product is enlarged by the eyepiece. Although you may see dust that has

entered, it does not affect the accuracy of measurement.

lExternal display

1Measurement display mode*1

2Unit of measure (m: meter/YD: yard/ft: feet)

3Target Priority mode (1st: First Target Priority mode/

Dst: Distant Target Priority mode)

4External display backlight level

5Battery level indicator

6Actual distance

7Horizontal distance

8Log indicator*2

9Log number*2

0Height

aAngle

*1 See page 20 for more information.

*2 See “Log indicator” (page 10) and “Enabling or disabling the log

function (F4)” (page 15) for more information.

When measuring upward

4321

When measuring downward

4321

lLog indicator

Internal display External display Description

Blinks. Blinks.

The log function is enabled but new logs are not saved

because the maximum of 250 logs has already been

saved.

Displayed

continuously.

Displayed

continuously.

The log function is enabled. If the measurement is

successful, the log number is displayed on the external

display.

Not displayed. Not displayed. The log function is disabled.

 Type of battery

3V CR2 lithium battery ×1

 Inserting the battery

1. Rotate the battery-chamber cover counterclockwise to open it.

2. Insert the battery with the positive (+) and negative (–) terminals oriented correctly as described on the

label in the battery chamber.

3. Attach the battery-chamber cover, rotate the cover clockwise, and secure it firmly.

• The battery-chamber cover may be difficult to rotate because this product uses a rubber seal to

maintain its waterproof capabilities.

 Battery level indicator

Internal display External display Description

After power on, displays for

2 seconds only. Displayed continuously. Sufficient power available.

After power on, displays for

2 seconds only. Displayed continuously.

Power getting low.

Prepare to replace the

battery.

Displayed continuously. Displayed continuously. Low. Battery should be

replaced with a new one.

Blinks. After blinking 3

times, automatically powers

off.

Blinks. After blinking 3

times, automatically powers

off.

The battery is empty.

Replace the battery.

Inserting the battery

Otros manuales para Forestry Pro II

Tabla de contenidos

Otros manuales de Instrumento de medición de Nikon

Nikon

Nikon RifleHunter 550 Manual de usuario

Nikon

Nikon Aculon Manual de usuario

Nikon

Nikon Nivo Series Manual de usuario

Nikon

Nikon Prostaff 1000i Manual de usuario

Nikon

Nikon Total Station DTM-322 Manual de usuario

Nikon

Nikon CoolShot Pro Stabilized Manual de usuario

Nikon

Nikon Coolshot 40i Manual de usuario

Nikon

Nikon Aculon Manual de usuario

Nikon

Nikon Callaway RAZR Manual de usuario

Nikon

Nikon LASER 50 Manual de usuario

Nikon

Nikon Laser 550 Manual de usuario

Nikon

Nikon 8431 - Monarch - Dot Manual de usuario

Nikon

Nikon DTM-502 Series Manual de usuario

Nikon

Nikon MONARCH 2000 Manual de usuario

Nikon

Nikon Callaway XHOT Manual de usuario

Nikon

Nikon HQA46480 Manual de usuario

Nikon

Nikon PROSTAFF 1000 Manual de usuario

Nikon

Nikon LASER 800S Manual de usuario

Nikon

Nikon XF Series Manual de usuario

Nikon

Nikon ARROW ID 7000 VR Manual de usuario

Nikon

Nikon 7487 - Team Realtree Laser 1200 Rangefinder Manual de usuario

Nikon

Nikon MONARCH 3000 STABILIZED Manual de usuario

Nikon

Nikon Cool Shot 40 Manual de usuario

Nikon

Nikon COOLSHOT Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario