NIIMBOT B3S Manual de usuario
NIIMBOT is a brand under Wuhan Jingchen Intelligent ldentication Technology Ltd.
© 2022 NIIMBOT. All rights reseed.
Sma Label Printer
Quick Sta Guide
NIIMBOT B3S
Wuhan Jingchen Intelligent ldenticationTechnology Co., Ltd.
Suppo Email : se[email protected]
Ocial Website : www.niimbot.net
Oce Address :Creative Workshop No. 5, Creative World,Yezhihu West
Road,Hondshan District,Wuhan,China
Production Address : No. 1 Tianyang Road, Chuanlong Avenue, Hengdian
Street, Huangpi District, Wuhan, China
Package Contents
01
02
Basic Functions and Settings
03
Installing App
04
Connecting and Printing
05
Basic Functions
06
Specications
07
10
06
03
02
CONTENTS
11
12
13
Safety Precautions
08
Related statements
09
14
16
Installation
Package Contents
01
Sma Label Printer *1
USB Type-C Cable *1 Quick Sta Guide *1
Label Paper Roll *1
01 · 02
Installation
02
Tear o the seal on the label paper.
1
Press down the Paper Compament Open Button to open the
paper compament.
2
Paper Compament
Open Button
Toggle the spindle to the “open” position as the arrow sign
indicates.
3
Slide the paper compament bae to the correct scale according
to the width of the paper roll and toggle the spindle towards
the blade.
4
After adjusting the paper compament scale, the spindle must
be securely toggled to prevent any misaligned printing.
Spindle
Paper Compament Bae
Paper Blade
Print Head
Paper Compament Scale
03 · 04
Distinguish the sides of the paper roll. It will not print if the
paper roll is reversed.
Fit the paper roll into the paper compament and make sure
the print side faces the print head. Pull a ceain length of paper
out from the paper exit and then close the paper compament
cover.
5
Print Side
Basic Functions and Settings
03
1. Power On
When the device is powered o (screen unlit), long-press the
Power/Setting button for 2 seconds to power on the device and
the monitor screen will display the home inteace.
2. Feeding Paper
Press the Paper Exit/OK button and the device will roll out one
stretch of paper.
3. Choosing Paper Types: Dierent Types of Paper Displayed
Accordingly
Device ID
B3S-AB09000001
Crack Label: The seam of paper should be aligned to the cutting
opening, tear the paper to have it cut by the blade.
Black Label: Tear the paper through the tear line without
using the blade.
Cont Labe: A full sheet of print paper and use the blade to
have it cut at any position.
TRN Label: A type of transparent cont label; the seam of paper
should be aligned to the cutting opening, tear the paper to
have it cut by the blade.
05 · 06
4. Lack of Paper/Open Compament
If the monitor screen displays information of Cover Open/Lack
of Paper, the device will not respond to printing commands.
5. Low Batte
When the device is out of power, the monitor screen will display
“The batte level is low. Please charge!” and will automatically
power o in 10 seconds.
6. Bluetooth Connection
When the Bluetooth is connected, the Bluetooth icon will be
displayed in inveed white.
Cover Open! Lack of Paper!
The batte level is low.
Please charge!
Device ID
B3S-AB09000001
7. Power Indicator
When the device is connected with a power adapter, the power
icon will be displayed as follows.
8. Settings
Press Power/Settings button at the home inteace to enter the
settings inteace; continue to press the Power/Settings button
to switch among 5 dierent setting inteaces, including “Density”/
”Type of Paper”/”Shutdown Time”/”Language”/”Self-check page”.
Press Paper Exit/OK button at the setting inteace.
1) Printing density includes 5 levels (1/2/3/4/5).
2) Type of paper includes four types (crack label/black label/cont
label/TRN label).
3) The shutdown time when no operation is peormed on the
device is set in 4 levels (15 minutes/30 minutes/60minutes/
never).
Device ID
B3S-AB09000001
Density
< 3 >
Type Of Paper
< crack label >
07 · 08
4) Language is available in 2 types (Chinese/English).
5) Press the “Paper Exit/OK” button to print the self-check page.
The self-check page will include information of printer model,
rmware version, hardware version, device serial number, etc.
9. Printing
During the printing process, the monitor screen will display
“Printing”, and will automatically return to the home inteace
when the printing is completed. You can pause the printing with
the phone APP or press the “Paper Exit/OK” button.
Shutdown Time
< 60 minutes >
Language
< English >
Self-check Page?
Printing
Otros manuales para B3S
2
Tabla de contenidos
Otros manuales de Etiquetadora de NIIMBOT
NIIMBOT
NIIMBOT B3S Manual de usuario
NIIMBOT
NIIMBOT D110 Manual de usuario
NIIMBOT
NIIMBOT B1 Manual de usuario
NIIMBOT
NIIMBOT D101 Manual de usuario
NIIMBOT
NIIMBOT K3 Manual de usuario
NIIMBOT
NIIMBOT D101 Manual de usuario
NIIMBOT
NIIMBOT B18 Manual de usuario
NIIMBOT
NIIMBOT B3S Guía de instalación
NIIMBOT
NIIMBOT H1 Manual de usuario
NIIMBOT
NIIMBOT B21 Guía de instalación
