NI PXIe-7975 Manual de usuario

PXIe-7975

Getting Started

2022-07-06

Contents

NI FlexRIO™ FPGA Module Installation Guide and Specifications. . . . . . . . . . . . . . . . . . . . . 3

How to Use Your NI FlexRIO Documentation Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Required Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing the Application Soware and Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing the NI FlexRIO Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Unpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Preparing the Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing the NI FlexRIO FPGA Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Confirming that Measurement & Automation Explorer (MAX) Recognizes the

Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installing the NI FlexRIO Adapter Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing PXI EMC Filler Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

NI FlexRIO FPGA Module Signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Compliance and Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Electromagnetic Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CE Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Online Product Certification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Environmental Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Electromagnetic Compatibility Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Worldwide Support and Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ni.com

PXIe-7975 Getting Started

NI FlexRIO™ FPGA Module Installation Guide and

Specifications

This document explains how to install your NI FlexRIO system, comprised of the

NI PXIe-7975R (NI 7975R) FlexRIO FPGA module and an NI FlexRIO adapter module.

For information about the device specifications, refer to the NI PXIe-7975R

Specifications, available at Start > All Programs > National Instruments > NI

FlexRIO, and at ni.com/manuals.

For detailed information about the features and configuration options specific to

the NI FlexRIO FPGA module, refer to the NI FlexRIO Help, available at Start > All

Programs > National Instruments > NI FlexRIO, and at ni.com/manuals.

How to Use Your NI FlexRIO Documentation Set

Figure 1. How to Use Your NI FlexRIO Documentation Set

LabVIEW FPGA

Module Help

NI FlexRIO

Help

LabVIEW

Examples

INSTALL Hardware

and Software

CONNECT Signals

and LearnAbout

Your AdapterModule

LEARN About

LabVIEW FPGA

Module

PROGRAM Your

NI FlexRIO System

in LabVIEW FPGA

Module

Specifications document

for your FPGA module

Specifications document

for your adapter module

Are

You New to

LabVIEW FPGA

Module?

Yes No

Getting Started Guide

for your adapter module

Getting Started Guide

for your FPGA module

Document Location Description

Getting started guide for

your FPGA module

Available from the Start menu

and at ni.com/manuals.

Contains installation instructions for

your NI FlexRIO system.

PXIe-7975 Getting Started

Document Location Description

Specifications document

for your FPGA module

Available from the Start menu

and at ni.com/manuals.

Contains specifications for your

NI 7975R module.

Getting started guide for

your adapter module

Available from the Start menu

and at ni.com/manuals.

Contains signal information,

examples, and CLIP details for your

adapter module.

Specifications document

for your adapter module

Available from the Start menu

and at ni.com/manuals.

Contains specifications for your

adapter module.

LabVIEW FPGA Module

Help

Embedded in LabVIEW Help and

at ni.com/manuals.

Contains information about the basic

functionality of the LabVIEW FPGA

Module.

NI FlexRIO Help Available from the Start menu

and at ni.com/manuals.

Contains information about the FPGA

module, adapter module, and CLIP

configuration information.

LabVIEW Examples Available in NI Example Finder.

In LabVIEW, click Help > Find

Examples > Hardware Input and

Output > FlexRIO.

Contains examples of how to run

FPGA VIs and Host VIs on your device.

IPNet ni.com/ipnet Contains LabVIEW FPGA functions

and intellectual property to share.

NI FlexRIO product page ni.com/flexrio Contains product information and

data sheets for NI FlexRIO devices.

Table 1. NI FlexRIO Documentation Locations and Descriptions

Required Components

The following items are necessary to set up and use your NI FlexRIO system:

■The NI FlexRIO hardware device, comprised of the following items:

■NI 7975R

■NI FlexRIO adapter module

Note You can use the NI FlexRIO FPGA module without an adapter module

for coprocessing or peer-to-peer streaming. The adapter module

ni.com

PXIe-7975 Getting Started

installation instructions in this document do not apply to these

circumstances.

The following figure shows the combined module.

Figure 2. Combining Your Adapter Module and FPGA Module

NI FlexRIO

Adapter Module + = NI FlexRIO Device

NI FlexRIO

FPGA Module

■The following soware packages:

■LabVIEW

■LabVIEW FPGA Module

■NI FlexRIO Support

Note The most recent version of NI FlexRIO Support is available at

ni.com/downloads. Search for flexrio to download the latest

version of NI FlexRIO Support.

■NI FlexRIO Adapter Module Support[1]

Note The most recent version of NI FlexRIO Adapter Module

Support is available at ni.com/downloads. Search for flexrio

adapter module support to download the latest version of NI

FlexRIO Adapter Module Support. You do not need this soware if

you are not using an adapter module.

■(Optional) LabVIEW Real-Time Module.

■ A PXI Express/CompactPCI Express chassis

■One of the following controllers:

■ PXI Express/CompactPCI Express embedded controller

PXIe-7975 Getting Started

■MXI kit and a PC

■One of the following operating systems:

■Windows 8

■Windows 7

■Windows Vista

■Windows XP Pro x32 Service Pack 2 or Service Pack 3

■At least one cable for connecting signals to the NI FlexRIO device. Refer to

your adapter module documentation for a list of applicable cables and

accessories for your NI FlexRIO system.

1 The NI 1483 adapter module requires the NI-IMAQ instrument driver instead of NI

FlexRIO Adapter Module Support.

Installing the Application Soware and Driver

Before installing your hardware, you must install the application soware and

instrument driver. Visit ni.com/info and enter rdsowareversion as the Info Code to

determine which minimum soware versions you need for your device. Install the

soware in the following order:

1. Install LabVIEW.

Refer to the LabVIEW Installation Guide for installation instructions for

LabVIEW and system requirements for the LabVIEW soware. Refer to the

LabVIEW Upgrade Notes for additional information about upgrading to the

most recent version of LabVIEW for Windows. Documentation for LabVIEW is

available at ni.com/manuals and by selecting Start > All Programs > National

Instruments > LabVIEW > LabVIEW Manuals.

2. Install the LabVIEW FPGA Module.

Refer to the LabVIEW FPGA Module Release and Upgrade Notes for

installation instructions and information about getting started with the

LabVIEW FPGA Module. Documentation for the LabVIEW FPGA Module is

available at ni.com/manuals and by selecting Start > All Programs > National

Instruments > LabVIEW > LabVIEW Manuals.

3. (Optional) Install the LabVIEW Real-Time Module.

ni.com

PXIe-7975 Getting Started

Refer to the LabVIEW Real-Time Module Release and Upgrade Notes for

system requirements, installation instructions, and additional information

about using the LabVIEW Real-Time Module.

4. Install NI FlexRIO.

Refer to the NI FlexRIO Readme on the NI FlexRIO installation media for

system requirements and installation instructions for NI FlexRIO Support.

Documentation for NI FlexRIO Support is available at ni.com/manuals and by

selecting Start > All Programs > National Instruments > NI FlexRIO.

Note If you are not using an adapter module, skip step 5.

5. Install NI FlexRIO Adapter Module Support.

Refer to the NI FlexRIO Adapter Module Support Readme on the NI FlexRIO

Adapter Module Support installation media for system requirements and

installation instructions. Documentation for NI FlexRIO Adapter Module

Support is available at ni.com/manuals and by selecting Start > All Programs

> National Instruments > NI FlexRIO > NI FlexRIO Adapter Module

Documentation.

Installing the NI FlexRIO Devices

Note You must install the soware before installing the hardware.

Unpacking

The NI 7975R modules ship in antistatic packages to prevent electrostatic discharge

from damaging module components. To prevent such damage when handling the

modules, ground yourself using a grounding strap or by holding a grounded object,

such as your computer chassis, and complete the following steps:

1. Touch the antistatic package to a metal part of the computer chassis before

removing the module from the package.

Caution Never touch the exposed pins of connectors.

PXIe-7975 Getting Started

2. Remove each module from the package and inspect it for loose components

or any other sign of damage.

Notify NI if the modules appear damaged in any way. Do not install a damaged

module into the chassis.

Preparing the Environment

Ensure that the environment you are using the NI 7975R in meets the following

specifications.

Operating temperature (IEC 60068-2-1, IEC60068-2-2) 0 °C to 55 °C

Operating humidity (IEC 60068-2-56) 10% to 90% RH, noncondensing

Pollution Degree 2

Maximum altitude 2,000 m at 25 °C ambient temperature

Indoor use only.

Note Refer to the NI PXIe-7975R Specifications at ni.com/manuals for

complete specifications.

Installing the NI FlexRIO FPGA Module

Note You must install the soware before you install the hardware.

1. Power o and unplug the PXI Express chassis. Refer to your chassis manual to

install or configure the chassis.

2. Identify a supported PXI Express slot in the chassis. The figure below shows

the symbols that indicate the slot types in a PXI Express chassis.

ni.com

PXIe-7975 Getting Started

Figure 3. Symbols for PXI Express/PXI Express HybridSlots

NI PXIe-1062Q

12 3 45

1. PXI Express System Controller Slot

2. PXI Peripheral Slot

3. PXI Express Hybrid Peripheral Slot

4. PXI Express System Timing Slot

5. PXI Express Peripheral Slot

Refer to the chassis documentation for specifications.

3. Remove the filler panel of an unused PXI Express slot.

4. Touch any metal part of the chassis to discharge any static electricity. Place

the PXI Express module edges into the module guides at the top and bottom

of the chassis, and slide the module into the chassis until the module is fully

inserted, as shown in the figure below.

PXIe-7975 Getting Started

Figure 4. Installing an NI FlexRIO FPGA Module in the PXI Express Chassis

PXI-1000B

1. PXI Express Chassis

2. PXI Express System Controller

3. NI FlexRIO FPGA Module

4. Front-Panel Mounting Screws

5. Module Guides

6. Power Switch

5. Secure the device front panel to the chassis front panel mounting rail using

the front panel mounting screws.

6. Plug in and power on the PXI Express chassis.

Confirming that Measurement & Automation Explorer (MAX)

Recognizes the Device

Use Measurement & Automation Explorer (MAX) to configure your National

Instruments hardware. MAX informs other programs about which devices reside in

the system and how they are configured. MAX is automatically installed with NI

FlexRIO Support.

ni.com

PXIe-7975 Getting Started

Tabla de contenidos

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario