Nexxt Solutions NHE-R100 Manual de usuario
Smart Wi-Fi
relay switch
NHE-R100
Wireless
User guide
Thank you for purchasing the Smart relay
switch from Nexxt Solutions. We are
excited for being a part of making your life
easier, safer, and bringing peace of mind
inside and outside your home.
Package content
- Smart relay switch (1)
- Terminal screw cover (2)
- Fastening screw (4)
- User guide (1)
Safety information
Precautions
Please read and understand this entire
manual before attempting to install and
operate this electrical switch.
This smart relay switch works wtih
110-240-volt AC.
This device has been tested by the manufacturer
according to all international electrical
standards. However, every state has dierent
standards and rules for installing electrical
cabling and equipment in a home.
Improper installation of this product may cause
electrical injury to an individual.
Installation of this product must be performed
by a qualied electrician or a certied electrical
technician. Do not attempt to perform the
installation if you are not familiar with hardwired
electrical connections.
Improper installation can lead to loss of
warranty.
English
English
Product overview
1. Terminal screw covers
2. Pairing button/manual switch/reset
3. Wi-Fi LED status light
Turn power o at the
circuit breaker or fuse.
Nexxt Solutions assumes no liability for the
improper installation of this product.
WARNING: To avoid risk of electric
shock or electrocution, install the smart
relay switch away from any water
source.
WARNING: A neutral wire is needed to
power the relay switch.
WARNING: This device is single band
and will only work with 2.4GHz Wi-Fi
routers.
1
1
2 3
N
L
OutputInput
English
Step 1
Cut in half the xture or device cable that you wish to
connect to the smart relay switch. Strip the cable’s jacket
to to leave the wires bare and facilitate the connection to
the relay terminals.
Step 2
Remove the terminal screw covers. On the output side,
attach the wires coming from the xture or device to the L
(Live) and N (Neutral) terminals on the relay switch.
Proceed to tighten the terminal screws to make sure the
connection is secure.
Step 3
Repeat the same procedure on the input side of the relay
switch, but this time connecting the two electric wires
from the grid. Make sure to match the N (Neutral) wire
with Neutral terminal on the input section of the relay. Do
the same with the L (Live) wire. Avoid accidentally
reversing the wires to prevent malfunction or damaging
the device.
Initial inspection
Before installing the electrical relay switch,
ensure that all parts are included in the package.
If any part is missing or damaged, do not
attempt to install, or operate this product.
Estimated installation time: 10 minutes.
Tools that may be required but are not
included for installation
Phillips screwdriver
Flathead screwdriver
Wire strippers/cutters
1
2
3
N
L
Hardware installation
Output for load
Input connection
English
Installing the
Nexxt Home App
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
GET
Accvent LLC
Login with existing account
CreateNew Account
SOLUTIONS
Iniciarsesión con cuenta existente
CrearCuenta Nueva
SOLUTIONS
60 %
9:41 AM
Nexxt Home
Nexxt Solutions Home App
Cancel
INSTALLAccvent LLC
Download the Nexxt Home app from
Google Play or Apple App Store and
create a new account.
Scan the QR code
or download the
Nexxt Home app.
English
Step 2
Enter the verication code you received.
Step 1
Register by email. Fill in the required elds.
English
Step 4
The Nexxt Home account has been
successfully congured.
Step 3
Create a new password and then select Done.
60 %
9:41 AM
English
Add device
Press Add device or click on + icon, followed by the
smart relay switch.
The LED indicator light must start blinking. Otherwise,
press and hold the reset button on the unit for 10
seconds until the blue LED blinks fast.
Step 1
60 %
9:41 AM
60 %
9:41 AM
English
You must connect to a 2.4GHz Wi-Fi network. Enter your
network password. Make sure you enter the correct
password, otherwise the device will not connect. It may take
around 30 seconds to add the device, depending on the
Wi-Fi connection.
If pairing is successful, the notication Added will be
displayed on the screen.
Step 2
60%
9:41AM
60%
9:41AM
Step 3
60%
9:41AM
English
Device name
To rename the device, click on the pencil icon on the
screen, enter a dierent name, and then click on Save
to store your settings.
60%
9:41AM
Main interface
The main interface has a menu at the bottom of the screen
which includes: Power, Timer, and Setting.Tap on Power on
the screen to turn the relay switch on or o.
60%
9:41AM
60%
9:41AM
Tabla de contenidos
Idiomas:
Otros manuales de Cambiar de Nexxt Solutions
