New Air AC14000E Manual de usuario

PLEASEREADANDSAVETHESEINSTRUCTIONS



NewAirAC‐14000E,AC‐14000H

PortableAirConditioner

Owner’sManual

K0080-1-2

BEFORE USE

GENERAL SAFETY INSTRUCTIONS:

•ALWAYS OPERATE THE UNIT IN AN UPRIGHT

POSITION AND PLACE IT ON A FLAT, LEVEL

SURFACE AT LEAST 14” (36 CM) FROM ANY

OBJECTS OR COMBUSTIBLE SURFACES (FIG 1 &

4).

•DO NOT PLACE OBJECTS ON THE UNIT,AND DO

NOT COVER OR OBSTRUCT THE INLET OR OUTLET

GRILLS (FIG 2).

•CLOSELY SUPERVISE ANY CHILDREN AND PETS

WHEN THE UNIT IS IN USE.

•THIS APPLIANCE IS NOT INTENDED FOR USE BY

PERSONS (INCLUDING CHILDREN) WITH REDUCED

PHYSICAL, SENSORY OR MENTAL CAPABILITIES,

OR LACK OF EXPERIENCE AND KNOWLEDGE,

UNLESS THEY HAVE BEEN GIVEN SUPERVISED TO

ENSURE THAT THEY DO NOT PLAY WITH THE

APPLIANCE.

ELECTRICAL SAFETY:

•THIS APPLIANCE IS FOR INDOOR USE ONLY.

•ALWAYS TURN OFF THE UNIT AND UNPLUG IT

WHEN NOT IN USE.

•DO NOT USE THIS UNIT IN EXCESSIVELY HUMID

OR WET ENVRIONMENTS (FIG 3).

•DO NOT PULL OR PLACE STRAIN ON THE

POWER CORD WHEN MOVING THEAPPLIANCE.

•IF THE POWER CORD IS DAMAGED, IT MUST BE

REPLACED BYAN ELECTRICIAN OR

SPECIALIZED TECHNICIAN AUTHORIZED BY THE

MANUFACTURER IN ORDER TO PREVENT FIRE.

FOR MAXIMUM EFFICENCY:

•Make sure doors and windows are closed while the

portable air conditioner is in use. Also keep curtains

and blinds closed during the sunniest parts of the day

while the air conditioner is in operation.

•Frequently clean the portable air conditioner’s filters.

•Once the room or area has reached your desired

comfort level, be sure to reduce the unit’s temperature

and ventilation settings.

FIG. 1

FIG. 2

FIG. 3

FIG. 4

K0080-1-2

PARTS LIST

Front: Back:

1. Control panel

2. Louvers

3. Carrying handle

4. Casters

5. Air filters

6. Air inlets

7. Exhaust air outlet

8. Cord wrap

9. Rubber plug / drainage hole

Accessories:

10. Hose adapter (goes over the

exhaust hose and into the back

of the unit)

11. Exhaust hose

12. Round connector (to be used in

between the hose and window kit

or through a wall)

13. Exhaust cap

14. Extendable window kit

15. Drain hose for continuous

drainage

16. Activated carbon filter

17. Remote control

K0080-1-2

INSTALLATION INSTRUCTIONS

Installing the Exhaust Hose and Window Kit:

The unit is a portable air conditioner that may be moved from room to room. Hot air must be

exhausted out of the room for the appliance to work. This can be done with the included

window kit or by cutting a hole into a wall.

1. Venting Through a Window (Using the Window Kit)

FIG.5

Window kit

•Attach the round connector to the exhaust hose and secure it in place with screws.

Then, insert the other end of the exhaust hose into the window kit’s round opening.

•Open your window and insert the window kit into the open gap. Adjust the size of

the kit if necessary by sliding the window across so that the window kit is securely

held into place. This technique may also be used for sash windows.

2. Venting Through a Wall

FIG.6

Wall or Window

Round connector

FIG.7

•Cut a 5.95” (151 mm) diameter hole in the wall.

•Insert the exhaust hose through the hole. On the other side of the wall, attach the

round connector to the exhaust hose with screws (Fig. 7). When the air conditioner

is not in use, cover the hole with the provided exhaust cap.

K0080-1-2

Positioning the Exhaust Hose:

•Slide the hose adaptor over

the opening on the back of

the unit.

•Then insert one end of the

exhaust hose into the

adapter.

•Avoid kinks and bends in

the exhaust hose. This can

cause moist air to

accumulate, resulting in

overheating and

unexpected shut offs.

•The exhaust hose may be

extended from 12” (300 mm)

to 59” (1500 mm), but for

maximum efficiency, use the

shortest hose length

possible.

WARNING!

The included exhaust hose is

specifically designed to fit the

specifications of this unit. Do not

extend it with your own hose, as

this can cause the air conditioner to

malfunction.

FIG.8

FIG.9

FIG.10

FIG.11

K0080-1-2

Installing the Activated Carbon

Filters:

1. Remove the filter frames from

the unit (left and right sides).

2. Separate the filters from the filter

frames.

3. Remove the activated carbon

filters from their plastic bags.

4. Attach the activated carbon filters

onto the filter frames.

5. Re-fix the filters to the filter

frames (make sure the active

carbon filters will be hold

properly).

6. Re-install the filter frames to the

unit.

FIG.12

K0080-1-2

OPERATING INSTRUCTIONS

Control Panel:

FIG.13

1. ON/OFF (power) button

2. Full water tank indicator

3. Fan mode indicator

4. Mode selection button

5. Heater indicator (AC-14000H only)

7. Swing button

8. Sleep mode indicator

9. Sleep mode button

10. Temperature decrease button

11. Temperature display

12. Remote control receiver

13. Timer display

14. Temperature increase button

15. Timer button

16. Ionizer indicator

17. Ionizer button

18. Fan speed indicator

19. Automatic mode indicator

20. Fan speed button

21. Cooling mode indicator

Fahrenheit indicator

K0080-1-2

Turning the Unit On and Off

1. Press the ON/OFF button. The unit will automatically begin operating. If the ambient

temperature is higher than 74o F, the unit will work in cooling mode. If the temperature

is at or below 74o F, the unit will work in ventilation (fan) mode.

2. At this time, the indicator lights will show any functions that are in progress. Please

note that the display window will only show ambient room temperatures ranging from

32o F to 122o F

3. To turn the unit off, press ON/OFF button again.

Setting the Mode/Function:

1. Press the MODE button to select the desired mode (cooling, fan or heating). Heating

mode is only available on the AC-14000H.

Setting the Temperature:

1. Press the “Up” or “Down” button to change the set temperature.

2. The display window will indicate the set temperature. If no temperature is set, the

display will show the ambient room temperature.

3. Please note that the default temperature for cooling is 75o F and 68o F for heating.

Setting the Fan/Ventilation Speed:

1. Press the SPEED button to select the desired fan speed (high, medium or low). The

desired fan speed will show on the display screen.

2. If the unit is in AUTO mode, it will automatically choose the fan speed depending on the

room’s ambient temperature.

Setting the Timer:

1. Press the TIMER button to set the desired number operating hours (from 1 to 24 hours).

The display will show the number of hours being set as you press the TIMER button. If

the TIMER is not set, the unit will work continuously.

2. By pressing the timer but without selecting any other modes or settings, you can set the

number of hours to be delayed before the unit turns on. For example, if you set the

timer to “2,” the unit will automatically turn on after 2 hours.

The selected mode’s indicator light will turn on.

K0080-1-2

Sleep Mode:

1. When in cooling mode, press the SLEEP button. The set temperature will increase 2o F

on the first hour, another 2o F on the second hour, and then maintain that temperature.

2. When in heating mode, press the SLEEP button. The set temperature will decrease 2o

F on the 1st hour, another 2o F on the second hour, and then maintain that temperature.

3. In sleep mode, the fan will be automatically set to low. By pressing the SLEEP button

again, the set temperature and fan speed will revert back to previous settings.

4. The unit will shut down automatically after it has been in sleep mode for 12 hours.

5. Sleep mode will not work when the unit is in fan, dehumidification or auto mode. It will

only work in cooling or heating mode.

Swing Function

1. To activate the unit’s swinging louvers, press the SWING button. The louvers will rise in

3 different angles: 45°, 60°, and 75°.

2. Once the air conditioner is turned on, the louvers will rise to a 75° first, and then

automatically return to 45°.

45o60o75o

FIG. 14

Dehumidification Function:

When the air conditioner is in dehumidification mode, the temperature cannot be adjusted,

and the fan speed will be automatically set to low.

Heating Mode:

When the air conditioner is in heating mode, ambient warm air is recycled and used to heat

your immediate area. The exhaust pipe will still need to be fitted onto the unit in order

for the cold air to be removed. When in heating mode, the machine can be set on HIGH

or LOW speed.

K0080-1-2

Ionizer:

Press IONIZIER button to activate the ionizer function. This will remove harmful particles

from the air.

Error Messages:

If there is an error with the air conditioner, the LCD screen will display “E1” or “E2.” If either

of these error messages appears, please contact the manufacturer or a service center.

All of the above functions can be controlled with

the included remote.

The remote requires 2 AAA batteries.

FIG.15

Please Note:

1. To prolong the life of the compressor, after turning off the unit, please wait at least

3 minutes before turning it back on.

2. The cooling system will turn off if the ambient temperature is lower than the set

temperature. However, the fan will continue operating at the set level. Once the

ambient temperature rises above the set temperature, cooling will resume.

3. The heating system will turn off if the ambient temperature is higher than the set

temperature. The ventilation fan will continue operating at the set level. Once the

ambient temperature drops below the set temperature, heating will resume.

4. This machine is equipped with an anti-frost function. When using the heating function in

low temperatures, the heater will occasionally stop heating in order to melt any frost

that has accumulated within the air conditioner. Normal operation will resume in a few

moments.

K0080-1-2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Acondicionador de aire de New Air

New Air

New Air NAC12KWH00 Manual de usuario

New Air

New Air NAC14KWHD3 Manual de usuario

New Air

New Air AC-12200E Manual de usuario

New Air

New Air AC-10000E Manual de usuario

New Air

New Air Air Cooler AF-320 Manual de usuario

New Air

New Air AC-12000E Manual de usuario

New Air

New Air AF-351 Manual de usuario

New Air

New Air NEC1K6WH00 Manual de usuario

New Air

New Air AF-321 Manual de usuario

New Air

New Air AC-10100E Manual de usuario

New Air

New Air NAC12KWH03 Manual de usuario

New Air

New Air AC-12000E Manual de usuario

New Air

New Air NAC08KWH00 Manual de usuario

New Air

New Air AC-10100E Manual de usuario

New Air

New Air NAC14KWHH2 Manual de usuario

New Air

New Air Air Cooler AF-330 Manual de usuario

New Air

New Air ACP-1000E Manual de usuario

New Air

New Air AC-14100 Manual de usuario

New Air

New Air AC-10100E Manual de usuario

New Air

New Air AC-14100E Manual de usuario

New Air

New Air AF-351 Manual de usuario

New Air

New Air NEC500WH00 Manual de usuario

New Air

New Air AC-14100E Manual de usuario

New Air

New Air AC-10000E Manual de usuario

Manuales populares de Acondicionador de aire de otras marcas

Spheros

Spheros CC 355 Manual de usuario

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manual de usuario

Panasonic

Panasonic CS-E12HKEW Manual de usuario

nedis

nedis ACMB1WT7 Manual de usuario

Samsung

Samsung AR KV Series Guía

Daikin

Daikin FCFV50A Manual de usuario

Fujitsu

Fujitsu Inverter ASBA30JFC Manual de usuario

Toshiba

Toshiba RAS-M10SMUV-E Manual de usuario

Daikin

Daikin FXLQ20MAVE Manual de usuario

Hitachi

Hitachi RAS-E24CAK Manual de usuario

CIAT

CIAT Magister 2 Series Guía

Bestron

Bestron AAC6000 Manual de usuario

Hisense

Hisense 7K Manual técnico

Frigidaire

Frigidaire FFRE0533S1E0 Manual de usuario

Samsung

Samsung AS09HM3N Manual de usuario

Frigidaire

Frigidaire CRA073PU11 Manual del propietario

Soleus Air

Soleus Air GB-PAC-08E4 Manual de usuario

McQuay

McQuay MCK020A Manual de usuario