Netvox R211 Manual de usuario

Model：R211

Wireless IR Blaster

User Manual

This document contains proprietary technical information which is the property of

NETVOX Technology. It shall be maintained in strict confidence and shall not be

disclosed to other parties, in whole or in part, without written permission of NETVOX

Technology. The specifications are subject to change without prior notice.

Table of Content

1. Introduction...............................................................................................................2

2. Appearance ...............................................................................................................3

3. Main Features ...........................................................................................................4

4. Set up Instruction......................................................................................................4

5. Data Report...............................................................................................................5

6. Control......................................................................................................................5

6-1 Device Learning Command ...............................................................................5

6-2 IR Command Execution.....................................................................................5

6-3 Control Command..............................................................................................6

6-3-1 IR Learning.........................................................................................6

6-3-2 Operating IR Remote Controller.........................................................7

6-3-3 Erase IR Code.....................................................................................9

7. Installation ..............................................................................................................10

8. Important Maintenance Instruction ........................................................................12

1. Introduction

R211 is a long-distance infrared learning device based on the LoRaWAN open protocol (Class C).

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power

consumption. Compared with other communication methods, LoRa spread spectrum modulation

method greatly increases to expand the communication distance. Widely used in long-distance,

low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low

power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure

interoperability between devices and gateways from different manufacturers.

2. Appearance

Function Key

Status LED (Blue)

Indicator (RED)

IR Button

IR extender socket x 4

DC in (Jack)

3. Main Features

Compatible with LoRaWAN Class C

DC 12V power supply

Infrared frequency 38KHz

Infrared learning and emission

Simple operation and setting

4. Set up Instruction

On/Off

Power on Plug in DC 12V Adapter

Turn ON

Blue and Red LED flash at the same time after power-on means turn on

successfully

Power off Remove Adapter.

Note:

1. On/off interval is suggested to be about 10 seconds to avoid the

interference of capacito

r inductance and other energy storage

components.

2. Press function key

and plug in adapter at the same time; it will enter

engineer testing mode.

Network Joining

Never joined the network

Power on the device to search the network

RED Indicator stays on: success

RED Indicator remains off: fail

Had joined the network

(Never reset to default)

Power on the device to search the previous network.

RED Indicator stays on: success

RED Indicator remains off: fail

Fail to join the network

(When the device is on)

First two minutes: Wake up every 15 seconds to send join-request.

After two minutes: enter sleeping mode and wake up every 15 minutes

to send join-request.

Note:

Suggest checking device verification on gateway or consult with your

NS provider if failed.

Button Function

Press and hold the

function key for 5 seconds

Function : Reset to factory default

RED Indicator flashes for 20 times.

Reset to factory default is failed if RED LED does not flash.

Press function key once

Joined the network: Sends an uplink version packet.

Not joined the network: No response

5. Data Report

The device will immediately send a version packet when joined the network

The device sends heartbeat according to default report interval.

6. Control

6-1 Device Learning Command

Sending learning commands from gateway to turn on learning mode.

After device’s BLUE LED is on, press remote controller’s button and point it to device to learn

IR command.

BLUE LED is off after learning completed and sends the message back to gateway.

Note:

IR saving storage is full if return status is ‘02’, and needs to erase IR command to continue

learning.

6-2 IR Command Execution

IR execution method 1.

This method needs to have complete IR codes（IR data）response when learning.

IR execution method 2.

This method uses Actual IRIndex response command to edit IR command execution and do not need

to have complete IR codes（IRdata）.

6-3 Control Command

FPort：0x21

6-3-1 IR Learning

NEW IR learn request(IR)

IR Index - 2 bytes - Index of IR Command

NEW IR learn Confirm response(IR)

Actual IRIndex - 2 byte - Index of IR Command Assigned by device

Data index number - byte - IR array have all piece number.

Data Index - byte - Index of IR Data array.

Data len - byte - length of IR array.

Data – var bytes - IR data. (MAX=32bytes)

Ex.

If remote controller’s original IR code is 6FA652000040A000000000000001D9

Downlink: 490001

Uplink returns: 4A000001000F6FA652000040A000000000000001D9

0x4A= Cmd

0x0000= Actual IRIndex

0x01= Data Index number

0x00= Data Index

0x0F= Data len, means Data’s length have 15 bytes 0F (Hex) =15( Dec)

0x6FA652000040A000000000000001D9= Data (Each infrared device is difference.)

Bytes 1 2

Cmd=0x49 IR Index

Bytes 1 2 1 1 1 Var(Max=32)

Cmd=0x4A

Actual

IRIndex

Data Index

number

Data Index Data len Data

6-3-2 Operating IR Remote Controller

Below command is use complete infrared code to control remote controller

AIR IR Apply request

Data index number - byte - IR array have all piece number.

Data Index - byte - Index of IR Data.

Data len - byte - length of IR array.

Data - var bytes - IR array data.(MAX=32bytes).

AIR IR Apply Confirm response

Status - byte - This field shall be set to SUCCESS (0x00) or FAILURE (non-zero)

Data Index - byte - Index of IR Data.

Ex.

According to the previous example, we got NEW IR learn Confirm response is

4A000001000F6FA652000040A000000000000001D9

Downlink: 0701000F6FA652000040A000000000000001D9

Uplink returns:

080000 succeed

080100 failed

Bytes

Var(Max=32)

Cmd=0x07

Data Index

number

Data Index

Data len

Data

Bytes

Cmd=0x08

Status

Data Index

Below command is use Actual IR Index to control remote controller

AIR IR Apply With IR Index request

Actual IRIndex - 2 byte - Index of IR Command Assigned by device

(Should use IRIndex return By NEW IR learn Confirm response(IR)

AIR IR ApplyWithIRIndex Confirm response

Status - byte - This field shall be set to SUCCESS (0x00) or FAILURE (non-zero)

Ex.

According to the previous example ,We got NEW IR learn Confirm response is

4A000001000F6FA652000040A000000000000001D9

Downlink: 320000

Uplink returns:

3300 succeed

3301 failed

Bytes

Cmd=0x32

Actual IRIndex

Bytes

Cmd=0x33

Status

6-3-3 Erase IR Code

Erase IR request

Magic number - 4bytes – fixed to 0x05717188.

Erase IR Confirm response

Status - byte - This field shall be set to SUCCESS (0x00) or FAILURE (non-zero)

Ex.

Downlink: 0D05717188

Uplink returns:

0E00 succeed

0E01 failed Note: Erase IR Code means ALL IR code was cleared.

Bytes

Cmd=0x0D

Magic number

Bytes

Cmd=0x0E

Status

Otros manuales para R211

Tabla de contenidos

Otros manuales de Puerta de netvox

netvox

netvox ZL01E Manual de usuario

netvox

netvox ZigBee ZL01A Manual de usuario

netvox

netvox R211 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario