NETGEAR FVS318 - ProSafe VPN Firewall Router Manual de usuario

Installation Guide

Cable/DSL ProSafe VPN Firewall

MODEL FVS318

Get other manuals https://www.bkmanuals.com

Technical Support

YOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAIN

PROOF OF PURCHASE AND THE WARRANTY INFORMATION.

To register your roduct, get roduct su ort or obtain roduct information and roduct

documentation, go to htt ://www.NETGEAR.com/register.

You’ll find technical su ort information at htt ://www.NETGEAR.com/ through the

Customer Service area. If you want to contact technical su ort by tele hone, see the su ort

information card for the correct tele hone number for your country.

NETGEAR and Auto U link are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or

other countries.

Other brand and roduct names are trademarks or registered trademarks of their res ective holders.

Information is subject to change without notice.

Get other manuals https://www.bkmanuals.com

Introduction

Thank you for urchasing a NETGEAR FVS318 Cable/DSL ProSafe VPN Firewall. A firewall is

a s ecial ty e of router that incor orates features for network security. With this firewall you can

have secure Internet access through a high-s eed DSL or cable modem and share the single

modem with several com uters.

This installation guide shows you how to connect the firewall and configure it and your

com uters for secure Internet access. Setu is easy—follow the instructions in this guide and

your system will be u and running quickly.

If you have roblems, there is a troubleshooting section on age 13 to hel you—or you can

get more detailed troubleshooting information from the Reference Manual on the CD, online

from www.NETGEAR.com or by hone.

Installation Overview

Estimated time: 15 to 30 minutes

1. Gather the configuration information you have for your working DSL or cable modem

connection to the Internet.

2. Install the firewall between the DSL or cable modem and one com uter.

3. Configure that com uter to work with the firewall and restart the com uter and modem.

4. Configure the firewall and go online to test the connection.

5. Connect other com uters, configure them and restart each. (o tional)

6. Configure for VPN or ort forwarding. (o tional)

On the FVS318 Resource CD, you’ll find the FVS318 Installation Assistant, which

su lements the instructions in this installation guide by animating the ste -by-ste rocedures

given here. For more detailed information about installation, troubleshooting and configuration

rocedures, see the Reference Manual on the CD.

WirelessDSL

ProSafe VPN Firewall

MODEL

FVS318

PowerT

est

LNK

ACT

12345678

100

LNK/ACT

INTERNETLOCAL

Model FVS318 Cable/DSL ProSafe VPN Firewall

Get other manuals https://www.bkmanuals.com

What’s in the Box

When you o en the box, verify that you received everything.

The ackage includes:

• FVS318 Cable/DSL ProSafe VPN Firewall

• AC ower ada ter

• Ethernet atch cable

• FVS318 Resource CD, including a full Reference Manual and Installation Assistant.

• FVS318 Installation Guide (this document)

• Warranty and registration card

• Su ort information card

If you don’t have everything listed above, see the su ort information card for contact

information. If the su ort information card is missing, you can get contact information at

www.NETGEAR.com in the Customer Service area.

WirelessDSL

ProSafeVPNFirewall

MODEL

FVS318

Power Tes t

LNK

ACT

12345678

100

LNK/ACT

INTERNET LOCAL

FVS318 Cable/DSL ProSafe VPN Firewall

FVS318 Resource CD,

installation guide, support

information card &

warranty/registration card

Power adapter

Category 5

100 Mbps

Ethernet cable

Get other manuals https://www.bkmanuals.com

Gather Configuration Information for

Your Working Connection to the Internet

Before installing the FVS318 firewall, you

should have an external DSL or cable

modem with an Ethernet ort set u and

working with one com uter. You’ll be

installing the firewall between the modem

and the com uter.

For each com uter that you want to

connect to the firewall, you must have

• An available RJ-45 Ethernet ort (or

ada ter) — either built-in or from a

network interface card (NIC) installed

in the com uter.

Note: If you have a built-in modem

or a modem card, the telephone jack

for the modem looks very similar to

an RJ- 5 Ethernet port, but the RJ-

5 port is larger.

• TCP/IP installed.

• If your com uter is a Windows®com uter, it must have the Client for Microsoft®

Networks software installed.

Note: Please see the Reference Manual on the CD if you need help installing

TCP/IP software or the Client for Microsoft Networks software on any Windows

computer that hasn’t been networked previously.

• A Category 5 (Cat 5) Ethernet atch cable

Note: There is one cable in the box with the firewall.

DSL modem

Note: If you have a cable

modem, you will have a cable

connection between the

modem and your cable outlet.

Get other manuals https://www.bkmanuals.com

Connection information

Later in the setu rocess you’ll need to configure the firewall to work with your network. A

Setu Wizard is available to hel you through this rocedure. Alternatively, you can configure

the firewall yourself using information that you can get from your com uter or your ISP about

your current Internet connection.

The next age includes blanks for you to fill in and refer to later. To get the needed

information from your com uter:

• O en the Network control anel, select the TCP/IP entry, and click Pro erties.

(Windows 98/Me)

• O en Local Area Network Connection and click Pro erties. (Windows 2000/XP)

• O en the TCP/IP (or Network) control anel. (Macintosh®)

Your ISP should have provided you with a summary sheet of all the information needed to connect

your computer to the Internet. If you cannot locate the information, you’ll have to contact your ISP.

An ISP Guide is included with your firewall’s documentation, either as a rinted card or on the

Resource CD. The ISP Guide contains s ecific configuration guidelines for connecting to

many o ular ISPs.

Get other manuals https://www.bkmanuals.com

Host and Domain Names

Some ISPs use a s ecific host or domain name—like jsmith or earthlink.net. If you haven’t

been given s ecific information about host or domain names then use the following exam les

as a guide:

• If your main e-mail account with your ISP is aaa@yyy.com, then use aaa as your host

name. (Your ISP might call this your account name, user name, or system name.)

• If your ISP’s mail server is mail.xxx.yyy.com, then use xxx.yyy.com as the domain name.

Host name:_____________________________________

Domain name: __________________________________

If your ISP requires a login name and assword ( ossibly because you have a PPPoE account),

fill in the following:

(may be your full e-mail address)

Password:______________________________________

Note: The login name could be called a user name or account name by your ISP.

The login name is case sensitive. You must type it exactly as given by your ISP. For

example, c_jones is a different login name than C_Jones or cjones.

Fixed (or static) IP address

If you have a static IP address through your ISP, fill in the following information:

IP address: _____._____._____._____

Subnet mask: _____._____._____._____

Gateway IP address:_____._____._____._____

DNS server address information

If you were given s ecific Domain Name System (DNS) server addresses, fill in the following:

DNS Server IP address(es): _____._____._____._____

_____._____._____._____

Get other manuals https://www.bkmanuals.com

Install the Firewall

After un acking the box and locating

the configuration information, you’re ready to

install the firewall.

Note: You do not have to power down any

equipment to do this, but if you need to move

your computers (perhaps to get to ports in

the back), you may want to shut down the

computers before moving them around.

1. Locate the Ethernet cable currently going

from the DSL or cable modem to the

com uter that you use to access the Internet.

Note: You must use this cable to connect the

DSL or cable modem to your firewall since

this may be a special cable even though it

looks like other LAN cables.

2. Remove this cable from the com uter and insert that end into the Internet ort on the

rear anel of the firewall.

3. Use the Ethernet atch cable that came with the firewall to connect the com uter to

one of the eight numbered local Ethernet orts on the rear anel of the firewall.

4. Connect the ower ada ter’s cord into the back of the firewall and then lug the

ada ter into a ower source (such as a wall socket or ower stri ).

5. Turn on the ower switch on the rear anel of the firewall.

Note: If you want to connect other computers to the firewall, don’t connect them

now. Do that after you know that the modem/firewall setup works with one

computer.

12VDC 1.2A

87654321

LOCAL

10/100M

INTERNET

OFF ON

DSL

modem

Model FVS318 Cable/DSL ProSafe VPN Firewall

Get other manuals https://www.bkmanuals.com

Check the setup

• The Test light turns on for a few seconds and then goes off.

Note: If the Test light remains on for more than one minute, go to Troubleshooting

on page 13.

• The Power and Internet Link lights should be lit.

• If your com uter is on, the Local Link light should be on for the ort number that your

com uter is connected to.

Note: If the Local port connection is a 100 Mbps connection, the 100 light should be on.

If either the Power, Internet, or ort Link light isn’t lit, go to Troubleshooting on age 13.

Get other manuals https://www.bkmanuals.com

Configure the Computer to Work with the

Firewall and Restart the Network

Next, you make sure that the com uter can interact with the firewall. To do this, you configure

the TCP/IP settings on the com uter and then restart the network. How you do this de ends

on your com uter.

Windows Operating System

Normally, you leave the TCP/IP setu arameters at their factory default settings unless you

have a s ecific reason to change them. You should verify that the com uter is set to ‘obtain an

IP address automatically’ in the Network control anel.

Windows 98 or Me

1. Choose Settings>Control Panel from the Start menu.

2. Double-click the Network icon.

3. Click the Configuration tab.

4. In the list of installed network com onents, select the TCP/IP entry for the com uter’s

Ethernet ada ter or NIC.

5. Click Pro erties.

6. Click the IP Address tab.

7. Check that Obtain an IP Address Automatically ia selected, select if not.

8. Click the Gateway tab.

9. Select and remove any IP Gateway addresses that are listed.

10. Click OK and click OK again to close the Network control anel.

11. Go to Restarting the Network on the next age.

Windows 2000 or XP

1. Right-click My Network Place and choose Pro erties.

2. Double-click Local Area Network Connection and

click Pro erties.

3. Select Internet Protocol (TCP/IP) and click Pro erties.

4. Select Obtain IP address automatically.

5. Click OK twice and click Close.

6. Go to Restarting the Network.

Windiws 98/Me

Get other manuals https://www.bkmanuals.com

Otros manuales para FVS318 - ProSafe VPN Firewall Router

Tabla de contenidos

Otros manuales de Puerta de NETGEAR

NETGEAR

NETGEAR CGD24N Manual de usuario

NETGEAR

NETGEAR CG814WG Manual de usuario

NETGEAR

NETGEAR CVG834G Manual de usuario

NETGEAR

NETGEAR DEVG2020 DOT Manual de usuario

NETGEAR

NETGEAR Lifestyle ASG1100 Manual de usuario

NETGEAR

NETGEAR C3700 Manual de usuario

NETGEAR

NETGEAR CG814W Manual de usuario

NETGEAR

NETGEAR CVG824G Manual de usuario

NETGEAR

NETGEAR CG814W Manual de usuario

NETGEAR

NETGEAR CG3300D Manual de usuario

NETGEAR

NETGEAR CG3000Dv2 Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

NETGEAR

NETGEAR CG4500BD Manual de usuario

NETGEAR

NETGEAR CG814WG Manual de usuario

NETGEAR

NETGEAR CG814M Manual de usuario

NETGEAR

NETGEAR CG3100Dv3 Manual de usuario

NETGEAR

NETGEAR VEVG2610-1FXAUS Manual de usuario

NETGEAR

NETGEAR CG3000D-1CXNAS Manual de usuario

NETGEAR

NETGEAR CG814WH Manual de usuario

NETGEAR

NETGEAR CG814WG V2 Manual de usuario

NETGEAR

NETGEAR CGD24G Manual de usuario

NETGEAR

NETGEAR CG3000 Manual de usuario

NETGEAR

NETGEAR DG824M - 802.11b Wireless ADSL Modem Manual de usuario

NETGEAR

NETGEAR CBVG834G Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario

RTA

RTA 460MCBC-N2E Hoja de especificaciones