NetComm NF12 Manual de usuario

Conguration Guide

Netcomm NF12

IMPORTANT MESSAGE

Your router has been pre-conﬁgured, you do not need to

follow each step of the set-up guide but should retain this

document in case you need to manually conﬁgure your

equipment.

To conﬁgure your PC/Laptop with your wireless password including

changing your wireless password, please proceed to step 4.

Contents

1. Physical Connection

2. Network Conﬁguration

3. Conﬁguring Internet

4. Conﬁguring WI-FI

5. Change of Password

1. PHYSICAL CONNECTION

Please refer to the Quick Reference Guide or Welcome Pack that came with

your router.

PLEASE NOTE: Have your router powered on and connected directly to your

PC via Ethernet Cable before you begin, as these instructions are based on

wired Ethernet connection

2. NETWORK CONFIGURATION

PPPoE connection does not require you to have an IP address or DNS

settings manually encoded on your network card.

PPPoE connection uses authentication to establish the Internet

connection and its after doing this that your router is assigned an

IP and DNS settings from TPG.

To begin, your PC needs to receive a private IP address from the

router. Most NBN routers have DHCP enabled by default that

will take care of this.

Netcomm NF12

To ensure your Network Card is ready for this, please follow the

following steps:

A. Click on Start -> Control Panel -> Network and Internet ->

Network and Sharing Center -> Change adapter settings

B. Right click on Local Area Connection and select Properties

C. Double Click on Internet Protocol Version 4 (TCP/IPv4) ->

Properties

D. Ensure “Obtain an IP address automatically” is selected

E. Ensure “Obtain DNS server address automatically” is selected

F. Click OK

Conguration Guide Netcomm NF12

3. CONFIGURING ROUTER

A. Open your browser and in the address bar type

http://192.168.1.1 and press Enter

B. Enter admin for both the username and password and

click OK. If you have changed the login credentials, please

enter the current username and password for your router

interface.

C. Click Quick Setup under Basic Setup in the left hand panel

D. Type in your own TPG username and password, and

click Next.

E. You can change your Wi-Fi settings in this step. By default,

the router is conﬁgured with the following Wi-Fi security settings:

SSID (name for the Wi-Fi connection): TPG-xxxx (xxxx is

a random 4 digit alpha numeric code)

Authentication Type: WPA-PSK/WPA2-PSK

Encryption: TKIP/AES

WPA/WAPI passphrase: Initially conﬁgured to be the same

as your TPG password. You can enter your own text as

an option.

Click Next to continue.

F. The ﬁnal step is to change the password to log into your

router conﬁguration page. It is recommended that you

choose a unique password.

Click Finish to complete the Quick Setup Wizard.

Conguration Guide Netcomm NF12

4. CONFIGURING WI-FI

To use Wi-Fi, ensure that you have already setup your wireless

adapter on your PC/laptop.

A. Click Start > Control Panel > Network and Internet

> Network and Sharing Center > Change adapter settings

B. Right click on Wireless Network Connection and

click ‘Connect/Disconnect’

C. Find the SSID (network name) of your router and click

Connect. By the default, the network name should be

TPG-xxxx (xxxx is a random 4 digit alpha numeric code).

D. You will now be prompted to enter your WPA Key /

wireless password. This is the same as your TPG

password if you did not change it on the router.

E. Click OK.

F. You should now see your status as ‘Connected’.

Conguration Guide Netcomm NF12

5. CHANGE OF PASSWORD

For security purposes we highly recommend that you change your

password if you are using your default or

if you believe your password security has been compromised.

To change your password, ﬁrst please visit www.tpg.com.au/password

Your new password will take approximately 10-15 minutes to take effect,

after which you must reconﬁgure your new password in your router.

PLEASE NOTE:

Each time your router is powered on, it will initialize this automated authentication process after which your router will receive

a public IP address (ﬁxed or dynamic depending on your plan) and DNS settings from TPG.

Conguration Guide Netcomm NF12

13 14 23tpg.com.au/support

Tabla de contenidos

Otros manuales de Enrutador de red de NetComm

NetComm

NetComm Dynalink WSG-NP804n Manual de usuario

NetComm

NetComm NF10W Manual de usuario

NetComm

NetComm N3G002W Guía de inicio rápido

NetComm

NetComm NTC-220 Guía de inicio rápido

NetComm

NetComm 4G100W Manual de usuario

NetComm

NetComm NTC-220 Manual de usuario

NetComm

NetComm NB7 Manual de usuario

NetComm

NetComm NP290W Manual de usuario

NetComm

NetComm NB750 Manual de usuario

NetComm

NetComm NF15ACV Manual de usuario

NetComm

NetComm NB704 Manual de usuario

NetComm

NetComm 3G9W Manual de usuario

NetComm

NetComm NB6PLUS4WN Manual de usuario

NetComm

NetComm Videotron 3G36W-V Manual de usuario

NetComm

NetComm NCT-1000 Manual de usuario

NetComm

NetComm NWL-15 Manual de usuario

NetComm

NetComm 3GT1Wn Manual de usuario

NetComm

NetComm NB5 Manual de usuario

NetComm

NetComm V100 Manual de usuario

NetComm

NetComm NB9WMAXX Manual de usuario

NetComm

NetComm NB6PLUS4WN Manual de usuario

NetComm

NetComm RTA1030W Manual de usuario

NetComm

NetComm NTC-223 Manual de usuario

NetComm

NetComm NB5PLUS4W Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad