NetComm NF5 Manual de usuario

NF5 VOIP Setup

Guide

(for Exetel)

Configuring your NF5 for VOIP Service

The following steps will take you through the process of setting up your VOIP connection.

Step 1: Checking Computer Network Settings:

You will need to connect your computer directly to your VoIP device (modem, or ATA) and set

the network connection on your computer to obtain an IP address automatically. Please follow

the instructions appropriate for your operating system below:

Below are the instructions for setting Windows XP to obtain an IP address automatically for

your ethernet connection:

1. Click on the Start Menu, and go to “Control Panel”.

2. Click on “Network Connections”.

(If you only see "Network and Internet Connections", open that first, and then click on

"Network Connections".)

3. Right click on “Local Area Connection” and select “Properties”.

4. Double-click on “Internet Protocol”.

5. Select "Obtain an IP address automatically", and "Obtain DNS server

address automatically".

6. Click “OK”, and then click “OK”(or “Close”).

Below are the instructions for setting Windows Vista to obtain an IP address automatically for

your ethernet connection:

1. Click on the Start Menu, and go to “Control Panel”.

2. Click on “Network and Sharing Centre”.

(If you only see "Network and Internet", open that first, and then click on "Network and

Sharing Centre".)

3. Click on “Manage network connections”(on the left hand side of the window).

4. Right click on “Local Area Connection” and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Obtain an IP address automatically", and "Obtain DNS server

address automatically".

7. Click “OK”, and then click “OK” again.

Below are the instructions for setting Windows 7 to obtain an IP address automatically for your

ethernet connection:

1. Click on the Start Menu, and go to “Control Panel”.

2. Click on “Network and Sharing Centre”.

(If you only see "Network and Internet", open that first, and then click on "Network and

Sharing Centre".)

3. Click on “Change adapter settings” (on the left hand side of the window).

4. Right click on “Local Area Connection” and select “Properties”.

5. Double-click on “Internet Protocol Version 4 (TCP/IPv4)”.

6. Select "Obtain an IP address automatically", and "Obtain DNS server

address automatically".

7. Click “OK”, and then click “OK” again.

Below are the instructions for setting Windows 8 to obtain an IP address automatically for your

ethernet connection:

1. In Windows 8 Desktop view, move your cursor to the lower right; select Settings, and

then Control Panel.

2. Double-click Network and Sharing Center.

3. From the list of tasks on the left, click Change adapter settings

4. For a wired network connection, right-click Local Area Connection, and select

Properties.

5. From the Networking tab, make sure Internet Protocol Version 4 (TCP/IPv4) is

checked, and then click Properties.

6. Select "Obtain an IP address automatically", and "Obtain DNS server

address automatically".

7. Click “OK”, and then click “OK” again.

Below are the instructions for setting Mac OS X to obtain an IP address automatically for your

ethernet connection:

1. Click on the Apple Menu, and go to "System Preferences".

2. Click on "Network".

3. Click on “Ethernet” or "Built-in Ethernet".

4. Click on the "Configure" drop-down box, and select "Using DHCP" then click

"Apply".

Step 2: Configuring your VOIP settings:

Troubleshooting Tip

One sided VOIP calls may be an indication of a missing or misconfigured port forwarding rule.

1. Navigate to http://192.168.20.1 in a web browser, using “admin” as both the

username and password.

2. If you have been asked for First-time Setup Wizard, choose “No thanks, take me to the

Basic interface.”

2. From Basic Interface select “Switch to advanced view” from the bottom of the page.

3. Select the Service Domain option from the VoIP Settings and Configurations menu.

4. Please choose Ethernet WAN if you are using WAN connection or Mobile

Broadband if you are using a 3G/4G Connection.

5. Enter the following details as given to you by Exetel, your VoIP Service

Provider.

sip1.exetel.com.au or as per Exetel

Enable/disable as per Exetel instructions

Exetel VoIP account password.

sip1.exetel.com.au or as per Exetel

VoIP phone number provided to you by Exetel

or as otherwise directed by Exetel

SIP Setting Details

Display Name

VoIP Account Phone Number as provided by

Exetel.

User Name

VoIP Account Phone Number as provided by

Exetel.

VoIP Account Phone Number as provided by

Exetel or as otherwise instructed by Exetel.

VoIP Account Password as provided by Exetel.

Domain

sip1.exetel.com.au or as otherwise directed by

Exetel.

Registrar/Proxy Server

sip1.exetel.com.au or as otherwise directed by

Exetel.

Use Outbound Server

Enable or Disable according to your VoIP

account type. If you are unsure consult Exetel.

Outbound Proxy

sip1.exetel.com.au or as otherwise directed by

Exetel.

6. After entering all required fields click on the “Save” button.

7. Check the Status at the bottom of the page. The status should change to “Registered”

if all the settings entered are correct and you have a current connection to the internet.

8. Check for a dial tone on your phone handset. The VoIP account should now be active and

you should now be able to make and/or receive VoIP phone calls (depending on the type

of VoIP account you are using).

Otros manuales para NF5

Tabla de contenidos

Otros manuales de Puerta de NetComm

NetComm

NetComm NL20 Manual de usuario

NetComm

NetComm NF20 Manual de usuario

NetComm

NetComm NL1901ACV Manual de usuario

NetComm

NetComm NF18ACV Manual de usuario

NetComm

NetComm HS960 Manual de usuario

NetComm

NetComm NL1901ACV Manual de usuario

NetComm

NetComm 3G41WT Manual de usuario

NetComm

NetComm FIBRE NF1ADV Manual de usuario

NetComm

NetComm NL1901ACV Manual de usuario

NetComm

NetComm NTC-8000-01 Manual de usuario

NetComm

NetComm BigPond 3G9WB Manual de usuario

NetComm

NetComm NB620W Manual de usuario

NetComm

NetComm FIBRE NF1ADV Manual de usuario

NetComm

NetComm HS1100 Manual de usuario

NetComm

NetComm CloudMesh NL19MESH Manual de usuario

NetComm

NetComm NL20MESH Manual de usuario

NetComm

NetComm NB620W Manual de usuario

NetComm

NetComm NF3ADV-02 Manual de usuario

NetComm

NetComm 3G29WN2 GATEWAY SERIES Manual de usuario

NetComm

NetComm NB5580W Manual

NetComm

NetComm HS960 Guía de inicio rápido

NetComm

NetComm V320W Manual de usuario

NetComm

NetComm NB5580 Manual de usuario

NetComm

NetComm Freshtel NB9W Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario