Ness Navigator Manual de usuario
Touch Screen Keypad
USER'S MANUAL
for Navigator Touch Screen Keypads Rev 1.1
D8XCEL / D16XCEL
Hardware & Firmware V10
Document 890-472
COPYRIGHT NOTICE
All rights reserved. No part of this publication may be reproduced, transmitted or stored in a retrieval system in any form or by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Ness.
Ness reserves the right to make changes to features and specifications at any time without prior notification in the interest of
ongoing product development and improvement.
© 2018 Ness Corporation Pty Ltd ABN 28 069 984 372
D8XCEL, D16XCEL
USER'S MANUAL FOR NAVIGATOR KEYPADS
Document Part No: 890-472
Rev 1.1 December 2018
For use with Ness D8XCEL, D16XCEL control panels with 3G dialler V10 and later.
Related manuals:
890-473 D8/D16 XCEL LCD Keypad User Manual
890-474 D8/D16 XCEL Installer’s Manual
Innovative Electronic Solutions
www.ness.com.au
National Customer Service Centre
Ph: 1300 551 991
WARNINGS & NOTICES
Ness Corporation manufacturing processes are accredited to ISO9001 quality standards and all possible care and
diligence has been applied during manufacture to ensure the reliable operation of this product. However there are
various external factors that may impede or restrict the operation of this product in accordance with the product’s
specification.
These factors include, but are not limited to:
1. Erratic or reduced radio range (if radio accessories are installed). Ness radio products are sophisticated low
power devices, however the presence of in-band radio signals, high power transmissions or interference caused
by electrical appliances such as Mains Inverters, Wireless Routers, Cordless Phones, Computers, TVs and other
electronic devices may reduce radio range performance. While such occurrences are unusual, they are possible. In
this case it may be necessary to either increase the physical separation between the Ness receiver and other devices
or if possible change the radio frequency or channel of the other devices.
2. Unauthorised tampering, physical damage, electrical interruptions such as mains failure, electrical spikes or lightning.
3. Solar power inverters are a known source of electrical interference. Please ensure that this product and all associated
cabling is installed at least 3 metres away from a solar power inverter and its cabling.
4. While SMS reporting is a powerful and useful feature it is dependent on the integrity and availability of the cellular
network. As with any SMS message it is possible that SMS monitoring reports may be delayed or fail to be
delivered. Such failures are a function of the cellular network/s and beyond the control of Ness Corporation. Ness
recommends central station monitoring as your primary monitoring path.
WARNING: Installation and maintenance to be performed only by qualified service personnel.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries in accordance with
local regulations.
Contents
Introduction......................................................4
Navigator Touch Screen Keypad overview..............................4
Information Screen ................................................5
Care & Cleaning ..................................................6
Applying the Screen Protector .......................................7
Zone Status Display ...............................................8
Clock Display ....................................................9
Cellular Signal Display .............................................9
System Alarm Displays .........................................10, 11
Arming the System ...............................................12
Disarming the System.............................................13
Home Mode ....................................................14
Duress Alarm / Keypad Tamper Alarm ................................15
Emergency Alarms ...............................................16
Excluding Zones .................................................17
Event Memory ...................................................18
Day Mode Setup .................................................19
Day Mode Operation..............................................20
Auto Time Automation ............................................21
Auxiliary Outputs, Manual Operation .................................22
Operation by SMS Messaging ......................................23
Summary of SMS Commands ......................................24
Programming by Navigator Keypad
Programming Options Table ......................................25
How to enter program mode......................................26
Set Brightness, Set Volume.......................................27
Setting the Real Time Clock ......................................28
User Codes Programming .......................................29
Radio Keys Programming ........................................30
Timer Programming, Entry/Exit Delays..............................31
SMS Telephone Numbers ........................................32
Programming by SMS ............................................33
Changed SMS text outputs, zone names........................... 34-35
Central Station Monitoring .........................................36
SMS Self-Monitoring ..............................................37
Troubleshooting .................................................38
Installation Record ...............................................39
4
Introduction
Ness Navigator is a revolutionary touch
screen interface for use with Ness D8XCEL
and D16XCEL series alarm control panels.
Navigator has a large touch sensitive 3.5”
colour LCD which is easy to read, easy to
use and makes operating your Ness alarm
system a real pleasure.
The large colour screen means Navigator
can tell you much more than a conventional
keypad with zone descriptions displayed in
plain English and you can even edit zone
names yourself to reflect the names of
rooms in your own premises.
Not only does Navigator provide valuable
information about your Ness alarm system,
it allows you to arm and disarm your system,
tells you what the system is doing, you can
use it to program alarm system and if that’s
not enough - Navigator just looks great!
Navigator Touch Screen Keypad is compatible with Ness D8x and D16x control panels Version 7 and later.
1Touch to arm the system.
2Touch to arm Home Mode.
3Touch to Exclude zones.
4Touch to view the event memory.
5Numeric keypad.
6Touch to view the full zone list.
7Clock & Calendar. Touch to view the calendar.
This area also displays System Alarms.
8Touch to activate the Emergency Alarms.
9Displays current Emergency Alarms.
10 Touch to control the Auxiliary Outputs.
11 Touch to display the information screens.
12 Cellular signal strength display
1
2
3
4
6
7
8
9
10
11
5
12
5
Manufacturer Information
Designed and manufactured in Australia by
4/167 Prospect Hwy
Seven Hills, NSW, 2147
AUSTRALIA
nesscorporation.com
Info Screen
See page 6.
Your installer’s contact details are stored
here. Never lose a business card again!
John Able
Sydney, Australia
02 8825 9222
Friendly Alarms Pty Ltd
Ness Corporation contact details.
6
Caring for your Navigator
Do not use a pen, screwdriver or other sharp implement to press the touch
screen. Permanent damage may result and will invalidate any warranties.
Please press lightly, the touch screen does not need heavy force to operate.
Pressing too hard may damage the LCD screen and the housing. Navigator
responds to every touch with a short beep.
Cleaning The Touch Screen
Do not clean the touch screen with abrasive cleaners.
While the system is disarmed, press Info, Clean Screen to see the cleaning
instructions.
Care & Cleaning
STEP 1. In the disarmed
mode, press Info.
STEP 2. Press Clean Screen. STEP 3. Press Start.
You have 10 seconds left.
Step 4. The touch screen will be disabled for 10 seconds. Clean
the bare screen or the protective film using a soft dry cloth or a
cloth moistened with Isopropyl Alcohol.
Avoid chemical cleaners and solvents which may damage plastic
components.
Screen cleaning time
has finished.
7
Screen Protection
Applying the Protective Film
Navigator Touch Screen Keypad is supplied with a self-adhesive screen protector
to help protect the sensitive touch surface from marks and scratches which may
appear under normal use.
We highly recommend that you apply the protective film to keep the touch surface
looking brand new for years to come.
Please peel off this
mask BEFORE application
STEP 1. Use the orange No. 1 tab to
peel off the self-adhesive backing.
STEP 2. Flip the film over to position
the green No. 2 tab at the top left.
STEP 3. Holding the
protective film by the green
tab, carefully apply the film
to the Navigator’s screen.
Start applying at one end and
smooth the film as you go to
remove any air bubbles
STEP 4. Use the green tab
to peel off and discard the
topmost layer of the film.
Your Navigator is now ready
for use.
Please peel off this mask
AFTER application completed
Please peel off this mask
AFTER application completed
8
Zone Status Display
Zone names can be customised by
SMS. Page 34.
The Zone List display will show
8 or 16 zones depending on the
model.
The zone number and
description of all zones.
Unsealed zones
show a red indicator.
The Zone Status Bar displays the zone numbers
of unsealed zones.
If only one zone is unsealed its description will
also be displayed.
Zones which are currently in the alarmed state are
displayed in flashing red text.
Touch the Zone
Status Bar to
display the full
zone list.
Touch X to close the window.
9
Clock Display
Cellular Signal
To display the calendar.
Touch
Touch to close the window.
The date and time are normally
displayed when the system is
armed or disarmed.
The clock is automatically updated
from your cellular network so you
should only need to adjust the
clock if the panel is being used
‘offline’ without a SIM card
If the clock is manually set you will
need to adjust the Hours setting for
Daylight Savings.
The date and time can be set in
User Program Mode, see page 28.
If there is a System Alarm, this area
will display the alarm. See pages
10-11.
The cellular network signal
strength is displayed here.
Signal strength range is 00 (no
signal) to 30 (Best signal).
Signal strength below 5 means
the antenna should be checked or
moved to a better reception area.
Signal strength 00 and a Cellular
Fail message could mean that a
valid SIM card is not fitted or the
cellular network is not available.
No SIM means there is no SIM
card fitted.
10
System Alarms
Battery may be low due to a mains fail
or may need replacing due to old age.
Next
Please check mains power is plugged in and
switched on.
Panel Battery Low
Mains Power Fail
System Alarms
Next
Please replace radio key battery.
Radio Low Battery
System Alarm Display
To display System Alarm details.
Touch
the system alarm area.
If there is a System Alarm, the
clock area will display the alarm.
Touch to display details.
Touch to close the window.
Outstanding System Alarms
shown here.
Full description of the System
Alarm and what action to take.
Touch Next to view any other
System Alarms.
Radio Key low battery alarm.
Otros manuales para Navigator
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Teclado de Ness
Ness
Ness W1-B Manual de usuario
Ness
Ness D16x Deluxe Manual de usuario
Ness
Ness D8x Deluxe Manual de usuario
Ness
Ness 106-015 Guía
Ness
Ness D16 Manual de usuario
Ness
Ness Navigator Guía de inicio rápido
Ness
Ness M1 Navigator Manual de usuario
Ness
Ness Navigator D8XCEL4G Manual de usuario
Ness
Ness D16XCEL Manual de usuario
Ness
Ness UltraProx S2B Manual de usuario
