NEC Express5800/320Ma Manual de usuario

NEC Solutions (America), Inc.

NR002w

Express5800/320Ma:

Software Installation and Configuration Guide

Manual Name: Express5800/320Ma: Software Installation and Configuration Guide

Part Number: NR002w

Express5800/320Ma Software Release Number: 4.1.0

Publication Date: January 2006

NEC Solutions (America), Inc.

10850 Gold Center Drive, Suite 200

Rancho Cordova, CA 95670

Notice

The information contained in this document is subject to change without notice.

UNLESS EXPRESSLY SET FORTH IN A WRITTEN AGREEMENT SIGNED BY AN AUTHORIZED REPRESENTATIVE

OF NEC, NEC MAKES NO WARRANTY OR REPRESENTATION OF ANY KIND WITH RESPECT TO THE

INFORMATION CONTAINED HEREIN, INCLUDING WARRANTY OF MERCHANTABILITY AND FITNESS FOR A

PURPOSE. NEC assumes no responsibility or obligation of any kind for any errors contained herein or in connection with

the furnishing, performance, or use of this document.

Software described in NEC (a) is the property of NEC and/or its licensees, (b) is furnished only under license, and (c) may

be copied or used only as expressly permitted under the terms of the license.

NEC documentation describes all supported features of the user interfaces and the application programming interfaces

(API) developed by NEC and/or its licensees. Any undocumented features of these interfaces are intended solely for use

by NEC personnel and are subject to change without warning.

This document is protected by copyright. All rights are reserved. No part of this document may be copied, reproduced, or

translated, either mechanically or electronically, without the prior written consent of NEC Solutions (America), Inc.

The NEC Solutions (America), Inc. logo, Express5800/320Ma, and the Express5800/320Ma logo, are trademarks of NEC

Solutions (America), Inc. ActiveService Network is a trademark of Stratus Technologies Bermuda, Ltd. All other

trademarks and trade names are the property of their respective owners.

Contents iii

Contents

Preface ix

1. Overview of Software Installation, Upgrade, and Configuration 1-1

Acronyms 1-2

Installation-Related Documents 1-3

2. Installing Express5800/320Ma System Software 2-1

Overview of the IPL and Post-IPL Procedures 2-2

IPL Considerations 2-2

Mini-Setup Worksheet 2-3

Performing the IPL Procedure 2-5

Preparing for the IPL Procedure 2-6

Performing the IPL Procedure 2-6

The Post-IPL Procedure 2-9

Responding to Mini-Setup Prompts 2-9

Completing the Post-IPL Procedure 2-10

3. Configuring Software 3-1

Overview: Configuring Software 3-1

Extending the Microsoft SNMP Agent 3-2

Configuring the SNMP Agent 3-3

Loading the SNMP MIB File 3-6

Ensuring That VTMs Use Up-to-Date Firmware 3-6

Mirroring Disks 3-7

Using RDR to Mirror Disks in Internal Storage 3-8

Mirroring Schemes for Internal Disks 3-9

Converting a Dynamic Disk to a Basic Disk 3-10

Using RDR to Mirror Dynamic System Disks 3-11

Using RDR to Mirror Dynamic Data Disks 3-12

Creating a Spare Bootable Hard Disk 3-13

Booting from a Spare Bootable Hard Disk 3-13

Contents

iv Express5800/320Ma: Software Installation and Configuration Guide

Configuring Teams of Network Adapters 3-14

Configuring Link Speed and Duplex Mode 3-14

Creating Network Adapter Teams 3-15

Verifying the Network Adapter Team Configuration 3-17

Assigning an IP Address to a Network Adapter Team 3-17

Troubleshooting Network Adapters 3-18

4. Performing the Reload Procedure 4-1

Preparing to Reload Software 4-1

Reloading Express5800/320Ma Software 4-2

5. Performing the Remote Management Installation Procedure 5-1

Overview of the Remote Management Installation Procedure 5-1

Performing the RMI Procedure 5-1

Installing Documentation for Express5800/320Ma Systems 5-2

Removing Programs and Documentation 5-3

6. Updating Firmware 6-1

Preparing to Update Firmware 6-1

Updating VTM Firmware 6-1

Enabling and Disabling Autoburn to VTMs 6-3

Updating the BIOS 6-4

Updating BMC Firmware 6-8

7. Upgrading Express5800/320Ma Software 7-1

Preparing for Upgrading Systems Over the Network 7-2

Overview of the Upgrade Procedure 7-2

Breaking the Mirror of the System Volume 7-4

Performing the Express5800/320Ma Software Upgrade 7-5

Verifying That the Software Upgraded Successfully 7-7

Completing the Upgrade 7-8

Backing Out of the Upgrade 7-8

Appendix A. Connecting a UPS to an Express5800/320Ma System A-1

Overview of Connecting a UPS to an Express5800/320Ma System A-1

Connecting a UPS to the Express5800/320Ma System A-2

Configuring the UPS A-3

Contents

Contents v

Installing PCNS on the Express5800/320Ma System A-5

Configuring the PCNS User Interface A-6

Verifying the PCNS Installation A-7

Protecting Against Data Loss after a Medium Power Loss A-8

Index Index-1

vi Express5800/320Ma: Software Installation and Configuration Guide

Figures

Figure 3-1. SNMP Service Properties Traps Tab 3-4

Figure 3-2. SNMP Service Properties Security Tab 3-5

Figure 3-3. Slot and Disk Numbering 3-10

Tables vii

Tables

Table 1-1. Acronyms Used 1-2

Table 1-2. Documents Used During Installation and Configuration 1-3

Table 2-1. Mini-Setup Worksheet 2-3

Table 6-1. BIOS File Names 6-5

Table 6-2. BMC Firmware File Names 6-8

Table A-1. Recommended UPS Shutdown Parameters A-4

Table A-2. Recommended UPS Shutdown Behavior Settings A-4

Tables

viii Express5800/320Ma: Software Installation and Configuration Guide

Preface ix

Preface

Purpose of This Manual

The Express5800/320Ma: Software Installation and Configuration Guide documents

how to install and configure Express5800/320Ma software.

Audience

This manual is intended for system administrators who install and configure

Express5800/320Ma software.

Notation Conventions

This document uses the notation conventions described in this section.

Warnings, Cautions, and Notes

Warnings, cautions, and notes provide special information and have the following

meanings:

WARNING

!A warning indicates a situation where failure to take

oravoid a specified actioncouldcausebodily harmor

loss of life.

CAUTION

!A caution indicates a situation where failure to take or

avoidaspecified action coulddamagea hardware device,

program, system, or data.

NOTE

Anoteprovidesimportantinformationabouttheoperation

of an Express5800/320Ma system.

Preface

xExpress5800/320Ma: Software Installation and Configuration Guide

Typographical Conventions

The following typographical conventions are used in Express5800/320Ma documents:

•The bold font emphasizes words in text or indicates text that you type, the name of

a screen object, or the name of a programming element. For example:

Before handling or replacing a system component, make sure that you are

properly grounded by using a grounded wrist strap.

In the System Properties dialog box, click the Hardware tab.

Call the RegisterDeviceNotification function.

•Theitalic fontintroducesnew terms andindicatesprogrammingand command-line

arguments that the user defines. For example:

Many hardware components are customer-replaceable units (CRUs), which

can be replaced on-site by system administrators with minimal training or tools.

copy filename1 filename2

Pass a pointer for the NotificationFilter parameter.

•The monospace font indicates sample program code and output, including

message text. For example:

#include <iostream.h>

The operation completed successfully.

Otros manuales para Express5800/320Ma

Tabla de contenidos

Otros manuales de Servidor de NEC

NEC

NEC Express5800/R320g-M4 Manual de funcionamiento

NEC

NEC Express5800/120Rh-2 Manual de usuario

NEC

NEC Exress5800 Series Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC Active Upgrade Express5800/320Fc Manual técnico

NEC

NEC DX2000 Manual de funcionamiento

NEC

NEC R120d-2E Manual de usuario

NEC

NEC Express5800/R110j-1 Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC Express5800/A2040d Manual de usuario

NEC

NEC Express5800/R110i-1 Manual de usuario

NEC

NEC Express5800/T110h Manual de usuario

NEC

NEC Expres5800/A2040b Manual de usuario

NEC

NEC EXPRESS5800/120Lf Manual de usuario

NEC

NEC Express5800 120Li Manual de usuario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC N8140-815 Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NECCare Platinum SigmaBlade Manual de usuario

NEC

NEC Univerge SV8100 Manual de usuario

NEC

NEC NEC Express5800 Series Manual de funcionamiento

NEC

NEC Express5800/R320d-M4 Series Manual de usuario

NEC

NEC Express 5800/R320c-E4 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario