NEC Express5800 320La Guía de inicio rápido

Installation Notes

Express5800/320La

Service Pack 3

Installation Notes

PN: 455-01667-000

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is

the valuable property of NEC Solutions (America), Inc. and/or its licensors. NEC Solutions

(America), Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other

proprietary rights to this document, including all design, manufacturing, reproduction, use,

and sales rights thereto, except to the extent said rights are expressly granted to others.

The NEC Solutions (America), Inc. product(s) discussed in this document are warranted in

accordance with the terms of the Warranty Statement accompanying each product.

However, actual performance of each product is dependent upon factors such as system

configuration, customer data, and operator control. Since implementation by customers of

each product may vary, the suitability of specific product configurations and applications

must be determined by the customer and is not warranted by NEC Solutions (America), Inc.

To allow for design and specification improvements, the information in this document is

subject to change at any time, without notice. Reproduction of this document or portions

thereof without prior written approval of NEC Solutions (America), Inc. is prohibited.

Trademarks

Microsoft and Windows 2000 are registered trademarks of Microsoft Corporation.

All other product, brand, or trade names used in this publication are the trademarks or

registered trademarks of their respective trademark owners.

November 2002

NEC Solutions (America), Inc

15 Business Park Way

Sacramento, CA 95828

Express5800/320La

Service Pack 3

Installation Notes

The Express5800/320La Service Pack 3 Installation Notes contain supplemental

instructions needed to install Microsoft® Windows 2000® Service Pack 3. At

the completion of the installation of Service Pack 3, FT software will have been

updated to version 1.3. This document is intended to complement the more

detailed procedural documents available from Microsoft.

Please read these notes in their entirety before installing Service Pack 3.

CONTENTS

Prerequisites ...........................................................................................................................................3

Hardware............................................................................................................................................3

Software.............................................................................................................................................3

Installation..............................................................................................................................................3

nec

Express5800/320La Service Pack 3 Installation Notes 3

Prerequisites

Hardware

!NEC Express5800/320La Server with Windows 2000® Advanced Server installed.

Software

!NEC EXPRESSBUILDER ver. 2.002b-G CD-ROM

!Microsoft® Service Pack 3 CD-ROM

!Free disk space as specified by Microsoft’s SP3 requirements.

Installation

1. Close all running applications on the 320La server running Windows 2000

Advanced Server.

2. Change the “ BMC Fault Tolerant Service “ to Manual Start.

Start/settings/control panel/administrative tools/services/ BMC Fault

Tolerant Service/startup type

Select Manual.

3. Using PROSET, break the teaming of network cards.

Start/programs/intel/proset

Right click on Team.

Select Break Team.

4. Uninstall the PROSET application from your system.

Start/settings/control panel/add-remove programs

Select Proset.

Click Remove.

5. Reboot your server and login as administrator.

6. Insert the EXPRESSBUILDER Version 2.002b-G CD into your CD-ROM

drive. The CD auto-runs to the main menu.

7. At the EXPRESSBUILDER Master Control Menu, click Setup.

8. On the fly-out menu, select “Update NEC Express5800 system.”

9. At the setup message dialog box, click Yes.

10.Another dialog box appears. Disregard this dialog box and remove the

EXPRESSBUILDER CD and insert the Microsoft Service Pack 3 (SP3) CD.

4Express5800/320La Service Pack 3 Installation Notes

11.The SP3 CD brings up an information window. Close the information

window by clicking the “X”in the upper right hand corner of the display.

12.Click Yes on the displayed dialog box. The relevant files for the 320La

server are extracted from the CD.

13. When the Service Pack 3 Setup Wizard window displays, click Next.

14.Click the “I Agree” radio button, and then click Next.

15.Choose to archive or not archive files (this choice is up to local

administration policy). The default is to archive files. Click Next. The

Service Pack 3 installation begins.

16.Click Finish to begin the installation of the Service Pack 3 update.

17.Insert the EXPRESSBUILDER CD when prompted.

18.Close the EXPRESSBUILDER window by clicking the “X”in the upper

right hand corner of the display.

19.Click OK at the Setup Message dialog box.

20.Another dialog box displays, click OK.

21.Microsoft OS updates and 320La specific updates are installed.

Note: The batch process installing the updates runs for

five to seven minutes. At times it may seem that the process

has stalled. However, the system is still actively processing

the updates.

22.At the completion of the batch process, remove the EXPRESSBUILDER

CD. The system will reboot.

Note: The system reboots without user intervention.

23.After the Reboot, the Found New Hardware wizard may run. If it does, click

on all defaults to complete the process. If prompted to restart Windows, DO

NOT RESTART the system.

24.Check disk mirroring, if disabled, enable it again. During disk

resynchronization, DO NOT shut down the system.

Start/settings/control panel/administrative tools/computer

management/

Click on Storage.

Click on Disk Management.

Select “Veritas Volume Manager” and then Select “Disk View.”

Check if Disk Mirroring is enabled.

Express5800/320La Service Pack 3 Installation Notes 5

If not, make sure that both drives are dynamic disks.

Right click on the first drive and select “Create Volume”

25.Follow the instructions on the screen indicating how to create the new mirror

set.

26.Start the Windows 2000 Device Manager, and select View>Device by

Connection.

27.Uninstall the “ Stratus Enclosure Services NEC GEM Processor ” device.

28.Uninstall the “ Stratus Fault Tolerant Virtual 69000 video “ device.

29.Uninstall the “ Virtual Host Bus Adapter “ device.

Note: There will be two instances of this device.

Uninstall only the one without any disk drives listed under it.

30.Reboot your system.

31.Install the ESMPRO Agent from the ExpressBuilder Master Control Menu.

32.Enable Teaming on your network cards using PROSET.

Start/programs/intel/proset

Select “Create Team.”

Select the first network card.

Select the second network card.

Click on Finish.

33.Apply the Veritas Volume Manager 2.7 for Windows 2000 Hotfix05 from

the ExpressBuilder Master Control Menu.

34.Install the NEC ESMPRO report service for Volume Manager from the

ExpressBuilder Master Control Menu.

35.The system update to FT software Kit 1.3 and SVP3 has been completed.

36.If your system has any options installed, run the appropriate batch file

associated with that option. See the following table.

Options Batch File

NU515 / Pro 100+ NIC CD\WINNT\W2K\N850475.BAT

062-02021-000 / QLA12160 HBA CD\WINNT\W2K\N8803001.BAT

NU516 / QLA1080 HBA CD\WINNT\W2K\N8803002.BAT

062-02020-000 / FT DEU 2X13 HDD D\WINNT\W2K\N8890001.BAT

062-02173-000 / S1200 HOST HBA PKG CD\WINNT\W2K\N8803030.BAT

NU570/N570-P/NU571/NU571-P Pro1000 Copper / Fiber CD\WINNT\W2K\N810484.BAT

6Express5800/320La Service Pack 3 Installation Notes

Note: Shutdown and Restart your system after running

batch files.

Otros manuales para Express5800 320La

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de NEC

NEC

NEC 320Fc Manual

NEC

NEC UNIVERGE NEAX 2000 IPS Manual de usuario

NEC

NEC R320a-E4 Manual de usuario

NEC

NEC SV8300 Manual de usuario

NEC

NEC Express5800/120Mc2 series Manual de instrucciones

NEC

NEC N8800-103F Manual de usuario

NEC

NEC 320Fd Manual

NEC

NEC Express5800/T110g-S Manual de usuario

NEC

NEC Express5800/T110i Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC Express5800/120Rh-1 Manual de usuario

NEC

NEC NEC Express5800 Series Manual de usuario

NEC

NEC Express5800/T120e Manual de usuario

NEC

NEC Express5800/120Li N8100-1298F Manual de usuario

NEC

NEC Univerge SV8100 Manual del propietario

NEC

NEC Express5800/120Rc-2 Manual de usuario

NEC

NEC N8800-128F Manual de usuario

NEC

NEC Express5800 120Ed Guía de referencia

NEC

NEC Express5800/R120e-1M Manual de usuario

NEC

NEC Univerge SV8100 Manual

NEC

NEC Express5800/GT110d Manual de usuario

NEC

NEC Express5800/R120f-2M Manual de usuario

NEC

NEC Express5800/T110i Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario