National Instruments SCXI-1162HV Manual de usuario

SCXI-1162HV

User Manual

32-Channel Isolated AC/DC Digital Input Module

August 1994 Edition

Part Number 320790A-01

National Instruments Corporate Headquarters

6504 Bridge Point Parkway

Austin, TX 78730-5039

(512) 794-0100

Technical support fax: (800) 328-2203

(512) 794-5678

Branch Offices:

Australia (03) 879 9422, Austria (0662) 435986, Belgium 02/757.00.20, Canada (Ontario) (519) 622-9310,

Canada (Québec) (514) 694-8521, Denmark 45 76 26 00, Finland (90) 527 2321, France (1) 48 14 24 24,

Germany 089/741 31 30, Italy 02/48301892, Japan (03) 3788-1921, Netherlands 03480-33466, Norway 32-848400,

Spain (91) 640 0085, Sweden 08-730 49 70, Switzerland 056/20 51 51, U.K. 0635 523545

Limited Warranty

The SCXI-1162HV is warranted against defects in materials and workmanship for a period of one year from the date

of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or

replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor.

A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on the

outside of the package before any equipment will be accepted for warranty work. National Instruments will pay the

shipping costs of returning to the owner parts which are covered by warranty.

National Instruments believes that the information in this manual is accurate. The document has been carefully

reviewed for technical accuracy. In the event that technical or typographical errors exist, National Instruments

reserves the right to make changes to subsequent editions of this document without prior notice to holders of this

edition. The reader should consult National Instruments if errors are suspected. In no event shall National

Instruments be liable for any damages arising out of or related to this document or the information contained in it.

EXCEPT AS SPECIFIED HEREIN, NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

AND SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. CUSTOMER'S RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE ON THE PART

OF NATIONAL INSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY THE CUSTOMER.

NATIONAL INSTRUMENTS WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS,

USE OF PRODUCTS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY

THEREOF. This limitation of the liability of National Instruments will apply regardless of the form of action,

whether in contract or tort, including negligence. Any action against National Instruments must be brought within

one year after the cause of action accrues. National Instruments shall not be liable for any delay in performance due

to causes beyond its reasonable control. The warranty provided herein does not cover damages, defects,

malfunctions, or service failures caused by owner's failure to follow the National Instruments installation, operation,

or maintenance instructions; owner's modification of the product; owner's abuse, misuse, or negligent acts; and

power failure or surges, fire, flood, accident, actions of third parties, or other events outside reasonable control.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or

mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole

or in part, without the prior written consent of National Instruments Corporation.

Trademarks

LabVIEW®, NI-DAQ®, and RTSI®are trademarks of National Instruments Corporation.

Product and company names listed are trademarks or trade names of their respective companies.

Warning Regarding Medical and Clinical Use

of National Instruments Products

National Instruments products are not designed with components and testing intended to ensure a level of reliability

suitable for use in treatment and diagnosis of humans. Applications of National Instruments products involving

medical or clinical treatment can create a potential for accidental injury caused by product failure, or by errors on

the part of the user or application designer. Any use or application of National Instruments products for or involving

medical or clinical treatment must be performed by properly trained and qualified medical personnel, and all

traditional medical safeguards, equipment, and procedures that are appropriate in the particular situation to prevent

serious injury or death should always continue to be used when National Instruments products are being used.

National Instruments products are NOT intended to be a substitute for any form of established process, procedure, or

equipment used to monitor or safeguard human health and safety in medical or clinical treatment.

Contents

About This Manual............................................................................................................vii

Organization of This Manual........................................................................................vii

Conventions Used in This Manual................................................................................vii

The National Instruments Documentation Set..............................................................ix

Related Documentation.................................................................................................ix

Customer Communication ............................................................................................x

Chapter 1

Introduction.........................................................................................................................1-1

About the SCXI-1162HV..............................................................................................1-1

What You Need to Get Started .....................................................................................1-1

Software Programming Choices ...................................................................................1-1

LabVIEW and LabWindows Application Software .........................................1-2

NI-DAQ Driver Software..................................................................................1-2

Optional Equipment......................................................................................................1-4

Custom Cables ..................................................................................................1-5

Unpacking.....................................................................................................................1-6

Chapter 2

Configuration and Installation......................................................................................2-1

Module Configuration...................................................................................................2-1

Configuration Options.......................................................................................2-1

Configuring the Rear Connector for Parallel Mode..............................2-2

Configuring the Rear Connector for Serial Mode.................................2-2

Jumper Use........................................................................................................2-3

Supplementary Jumper W3 Configuration Installation ........................2-6

Hardware Installation....................................................................................................2-6

Software Installation.....................................................................................................2-7

Chapter 3

Signal Connections ............................................................................................................3-1

Front Connector ................................................................................................3-3

Front Connector Signal Descriptions................................................................3-4

Input Channels ......................................................................................3-4

Sensing DC Voltages............................................................................3-4

Sensing AC Voltages............................................................................3-5

Signal Isolation .....................................................................................3-5

Signal Connection Example..................................................................3-5

Terminal Block .................................................................................................3-6

Rear Signal Connector......................................................................................3-6

Rear Signal Connector Signal Descriptions, Serial Configuration...................3-8

Rear Signal Connector Signal Descriptions, Parallel Configuration................3-9

Contents

SCXI-1162HV User Manual vi © National Instruments Corporation

Appendix A

Specifications.......................................................................................................................A-1

Appendix B

Customer Communication..............................................................................................B-1

Glossary........................................................................................................................Glossary-1

Index..................................................................................................................................Index-1

Figures

Figure 1-1. The Relationship between the Programming Environment,

NI-DAQ, and Your Hardware...........................................................................1-3

Figure 2-1. Removing the SCXI Module Cover..................................................................2-3

Figure 2-2. SCXI-1162HV Parts Locator Diagram.............................................................2-4

Figure 3-1. SCXI-1162HV Front Connector Pin Assignment.............................................3-3

Figure 3-2. Signal Connection Example..............................................................................3-6

Figure 3-3. SCXI-1162HV Rear Signal Connector Pin Assignments.................................3-7

Tables

Table 2-1. Digital Signal Connections, Jumper Settings....................................................2-5

About This Manual

This manual describes the electrical and mechanical aspects of the SCXI-1162HV and contains

information concerning its operation. The SCXI-1162HV is a member of the National Instruments

Signal Conditioning eXtensions for Instrumentation (SCXI) Series modules for the National

Instruments plug-in DAQ boards. This module switches and controls low-level and power signals.

The SCXI-1162HV operates as 32 digital input channels, arranged as eight banks of four channels.

Each bank is optically isolated.

Organization of This Manual

The SCXI-1162HV User Manual is organized as follows:

• Chapter 1, Introduction, describes the SCXI-1162HV; lists what you need to get started with

your SCXI-1162HV; describes the software programming choices and optional equipment;

and explains how to unpack the SCXI-1162HV kit.

• Chapter 2, Configuration and Installation, describes the SCXI-1162HV jumper

configurations and installation of the SCXI-1162HV into the SCXI chassis.

• Chapter 3, Signal Connections, describes the SCXI-1162HV signal connections via the front

and rear connectors, and has specifications and connection instructions for the SCXI-

1162HV connector signals.

• Appendix A, Specifications, lists the specifications for the SCXI-1162HV.

• Appendix B, Customer Communication, contains forms you can use to request help from

National Instruments or to comment on our products.

• The Glossary contains an alphabetical list and description of terms used in this manual,

including abbreviations, acronyms, metric prefixes, mnemonics, and symbols.

• The Index contains an alphabetical list of key terms and topics in this manual, including the

page where you can find each one.

Conventions Used in This Manual

The following conventions are used in this manual:

bold italic Bold italic text denotes a note, caution, or warning.

DIO board DIO board refers to the National Instruments AT-DIO-32F, MC-DIO-24,

MC-DIO-32F, NB-DIO-24, NB-DIO-96, NB-DIO-32F, PC-DIO-24, and

PC-DIO-96 digital I/O DAQ boards unless otherwise noted.

About This Manual

SCXI-1162HV User Manual viii © National Instruments Corporation

DIO-24 board DIO-24 board refers to the National Instruments MC-DIO-24,

NB-DIO-24, and PC-DIO-24 digital I/O DAQ boards.

DIO-type board DIO-type board refers to National Instruments DAQ boards that have only

digital inputs and outputs. These boards include the DIO-24, DIO-32F,

and DIO-96 boards unless otherwise noted.

italic Italic text denotes emphasis, a cross reference, or an introduction to a key

concept.

Lab board Lab board refers to the National Instruments Lab-LC, Lab-NB, Lab-PC,

and Lab-PC+ boards unless otherwise noted.

MC MC refers to the Micro Channel Series computers.

MIO board MIO board refers to the National Instruments AT-MIO-16, AT-MIO-16D,

AT-MIO-16F-5, AT-MIO-16X, AT-MIO-64F-5, MC-MIO-16,

NB-MIO-16, and NB-MIO-16X multichannel I/O DAQ boards unless

otherwise noted.

MIO-type board MIO-type board refers to National Instruments DAQ boards that have at

least analog and digital inputs and outputs. These boards include the MIO

boards, the Lab boards, and the PC-LPM-16 board unless otherwise noted.

monospace Lowercase text in this font denotes text or characters that are to be literally

input from the keyboard, sections of code, programming examples, and

syntax examples. This font is also used for the proper names of disk

drives, paths, directories, programs, subprograms, subroutines, device

names, functions, variables, filenames, and extensions, and for statements

and comments taken from program code.

NB NB refers to the NuBus Series computers.

PC PC refers to the IBM PC/XT, the IBM PC AT, and compatible computers.

SCXIbus SCXIbus refers to the backplane in the chassis. A signal on the backplane

is referred to as the SCXIbus <signal name> line (or signal). The

SCXIbus descriptor may be omitted when the meaning is clear.

Slot 0 Slot 0 refers to the power supply and control circuitry in the SCXI chassis.

Abbreviations, acronyms, metric prefixes, mnemonics, symbols, and terms are listed in the

Glossary.

About This Manual

The National Instruments Documentation Set

The SCXI-1162HV User Manual is one piece of the documentation set for your DAQ or SCXI

system. You could have any of several types of manuals, depending on the hardware and

software in your system. Use these different types of manuals as follows:

•Getting Started with SCXI–If you are using SCXI, this is the first manual you should read. It

gives an overview of the SCXI system and contains the most commonly needed information

for the modules, chassis, and software.

• Your SCXI hardware user manuals–If you are using SCXI, read these manuals next for

detailed information about signal connections and module configuration. They also explain

in greater detail how the module works and contain application hints.

• Your DAQ hardware user manuals–These manuals have detailed information about the DAQ

hardware that plugs into or is connected to your computer. Use these manuals for hardware

installation and configuration instructions, specification information about your DAQ

hardware, and application hints.

• Software manuals–Examples of software manuals you may have are the LabVIEW and

LabWindows®manual sets and the NI-DAQ manuals. After you have set up your hardware

system, use either the application software (LabVIEW or LabWindows) manuals or the

NI-DAQ manuals to help you write your application. If you have a large and complicated

system, it is worthwhile to look through the software manuals before you configure your

hardware.

• Accessory installation guides or manuals–If you are using accessory products, read the

terminal block and cable assembly installation guides or accessory board user manuals. They

explain how to physically connect the relevant pieces of the system. Consult these guides

when you are making your connections.

• SCXI chassis manuals–If you are using SCXI, read these manuals for maintenance

information on the chassis and installation instructions.

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario