National Instruments NI 9203 Manual de usuario
NI-9203 Getting
Started
2022-07-06
Contents
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Voltages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Isolation Voltages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Guidelines for Hazardous Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electromagnetic Compatibility Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Special Conditions for Marine Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Preparing the Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting the NI 9203. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Overvoltage Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting Single-Ended Current Signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Where to Go Next. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
NI Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ni.com
2
NI-9203 Getting Started
Overview
This document explains how to connect to the NI-9203. In this document, the
NI-9203 with screw terminal and the NI-9203 with spring terminal are referred to
inclusively as the NI-9203.
Note Before you begin, read the NI-9203 Safety, Environmental, and
Regulatory Information document on ni.com/manuals and complete the
soware and hardware installation procedures in your chassis
documentation.
Note The guidelines in this document are specific to the NI-9203. The
other components in the system might not meet the same safety ratings.
Refer to the documentation for each component in the system to
determine the safety and EMC ratings for the entire system.
Safety Guidelines
Caution Observe all instructions and cautions in the user documentation.
Using the product in a manner not specified can damage the product and
compromise the built-in safety protection.
Attention Suivez toutes les instructions et respectez toutes les mises
en garde de la documentation d'utilisation. L'utilisation du produit de
toute autre façon que celle spécifiée risque de l'endommager et de
compromettre la protection de sécurité intégrée.
Safety Voltages
Connect only voltages that are within the following limits.
Channel-to-COM ±30 V DC maximum
© National Instruments 3
NI-9203 Getting Started
Isolation Voltages
Channel-to-channel None
Channel-to-earth ground up to 2,000 m altitude
Continuous 250 V RMS, Measurement Category II
Withstand 2,300 V RMS, verified by a 5 s withstand test
Channel-to-earth ground up to 5,000 m altitude
Continuous 60 V DC, Measurement Category I
Withstand 1,000 V RMS, verified by a 5 s withstand test
Safety Guidelines for Hazardous Locations
The NI-9203 is suitable for use in hazardous locations; , and hazardous locations;
and nonhazardous locations only. Follow these guidelines if you are installing the
NI-9203 in a potentially explosive environment. Not following these guidelines may
result in serious injury or death.
Caution Do not disconnect I/O-side wires or connectors unless power has
been switched o or the area is known to be nonhazardous.
Caution Do not remove modules unless power has been switched o or
the area is known to be nonhazardous.
Caution Substitution of components may impair suitability for Class I,
Division 2, or Zone 2.
Caution The system must be installed in an enclosure certified for the
intended hazardous (classified) location, having a tool secured cover/door,
where a minimum protection of at least IP54 is provided.
ni.com
4
NI-9203 Getting Started
Special Conditions for Hazardous Locations Use in Europe and
Internationally
The NI-9203 has been evaluated as equipment under DEMKO ATEX and is IECEx
certified. Each NI-9203 is marked and is suitable for use in Zone 2 hazardous
locations, in ambient temperatures of -40 °C ≤ Ta ≤ 70 °C. If you are using the NI-9203
in Gas Group IIC hazardous locations, you must use the device in an NI chassis that
has been evaluated as Ex nC IIC T4, Ex IIC T4, Ex nA IIC T4, or Ex nL IIC T4 equipment.
Caution Transient protection shall be provided that is set at a level not
exceeding 140% of the peak rated voltage value of 85 V at the supply
terminals to the equipment.
Caution The system shall only be used in an area of not more than
Pollution Degree 2, as defined in IEC/EN 60664-1.
Caution The system shall be mounted in an ATEX/IECEx-certified
enclosure with a minimum ingress protection rating of at least IP54 as
defined in IEC/EN 60079-15.
Caution The enclosure must have a door or cover accessible only by the
use of a tool.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits
for electromagnetic compatibility (EMC) stated in the product specifications. These
requirements and limits provide reasonable protection against harmful interference
when the product is operated in the intended operational electromagnetic
environment.
This product is intended for use in industrial locations. However, harmful
interference may occur in some installations, when the product is connected to a
peripheral device or test object, or if the product is used in residential or
commercial areas. To minimize interference with radio and television reception and
© National Instruments 5
NI-9203 Getting Started
prevent unacceptable performance degradation, install and use this product in strict
accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved
by National Instruments could void your authority to operate it under your local
regulatory rules.
Special Conditions for Marine Applications
Some products are approved for marine (shipboard) applications. To verify marine
approval certification for a product, visit ni.com/product-certifications, search by
model number, and click the appropriate link.
Notice In order to meet the EMC requirements for marine applications,
install the product in a shielded enclosure with shielded and/or filtered
power and input/output ports. In addition, take precautions when
designing, selecting, and installing measurement probes and cables to
ensure that the desired EMC performance is attained.
Preparing the Environment
Ensure that the environment in which you are using the NI-9203 meets the following
specifications.
Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C
Operating humidity (IEC 60068-2-30) 10% RH to 90% RH, noncondensing
Pollution Degree 2
Maximum altitude 5,000 m
Indoor use only.
Note Refer to the NI-9203 Specifications on ni.com/manuals for
complete specifications.
ni.com
6
NI-9203 Getting Started
Connecting the NI 9203
The NI-9203 provides connections for 8 analog input channels.
Figure 1. NI-9203 Pinout
AI0
AI1
AI2
AI3
AI4
AI5
AI6
AI7
NC
COM
0
1
2
3
4
5
6
7
8
9
Each channel has an AI terminal to which you can connect a current signal. The
NI-9203 also has a common terminal, COM, that is internally connected to the
isolated ground reference of the module.
Overvoltage Protection
The NI-9203 provides overvoltage protection for each channel.
Note Refer to the NI-9203 Specifications on ni.com/manuals for more
information about overvoltage protection.
Connecting Single-Ended Current Signals
You can connect single-ended current signals to the NI-9203.
Figure 2. Connecting Single-Ended Current Signals to the NI-9203
© National Instruments 7
NI-9203 Getting Started
Note You must use 2-wire ferrules to create a secure connection when
connecting more than one wire to a single terminal on the NI-9203.
Where to Go Next
NI Services
Visit ni.com/support to find support resources including documentation,
downloads, and troubleshooting and application development self-help such as
tutorials and examples.
Visit ni.com/services to learn about NI service oerings such as calibration options,
repair, and replacement.
Visit ni.com/register to register your NI product. Product registration facilitates
technical support and ensures that you receive important information updates from
NI.
NI corporate headquarters is located at 11500 N Mopac Expwy, Austin, TX,
78759-3504, USA.
ni.com
8
NI-9203 Getting Started
© 2022 National Instruments Corporation.
Otros manuales para NI 9203
2
Tabla de contenidos
Otros manuales de Unidad de control de National Instruments
National Instruments
National Instruments SCXI -1122 Manual
National Instruments
National Instruments PXIe-4357 Manual
National Instruments
National Instruments NI 5772R Manual de usuario
National Instruments
National Instruments C Series Manual de usuario
National Instruments
National Instruments PXIe-8238 Manual de usuario
National Instruments
National Instruments NI PXI-6682 Manual de usuario
National Instruments
National Instruments NI USB-9264 Manual de usuario
National Instruments
National Instruments SCC-A10 Manual de usuario
National Instruments
National Instruments NI USB-9201 Manual de usuario
National Instruments
National Instruments PCIe-7857 Manual de usuario
National Instruments
National Instruments Network Adapter NI PXIe-6672 Manual de usuario
National Instruments
National Instruments NI 9214 Manual de usuario
National Instruments
National Instruments NI 9234 Manual de usuario
National Instruments
National Instruments NI 9242 Manual de usuario
National Instruments
National Instruments FieldPoint FP-1000 Manual de usuario
National Instruments
National Instruments FlexRIO PXIe-79 R Series Manual de usuario
National Instruments
National Instruments NI 9227E Manual de usuario
National Instruments
National Instruments NI 9852 Manual de usuario
National Instruments
National Instruments NI 9205 Manual de usuario
National Instruments
National Instruments FieldPoint FP-DI-301 Manual de usuario
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
