Mustek 1200 ED Manual de usuario
The Scan Dialog Box
Appendices
The TWAIN Dialog Box
SCANNER
USER’S GUIDE
2
CopyrightInformation
All rights reserved. No part of this publication may be reproduced,
transmitted, stored in a retrieval system, or translated into any
language in any form by any means, mechanical, optical, electronic,
recording, or otherwise, without the our written permission.
We reserve the right to revise this manual and to make changes to
any or all parts at any time, without obligation to notify any person
or entity of such revisions and changes.
All other brand or product names mentioned in this manual are
trademarks or registered trademarks of their respective owners.
Copyright ©1999.
Printed in Taiwan, January 1999.
FCCStatement
This digital equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and if it is not installed and used according to the
instruction manual, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment causes harmful
interference to radio or television reception, which can be determined
by turning the equipment off or on, you are encouraged to try to correct
the interference by one or more of the following measures:
• Reorient the receiving antenna
• Increase the distance between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
NOTE:
1. The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
3
Scanning Methods ............................................................4
The Scan Dialog Box ........................................................5
To Acquire the Scan Dialog Box ...............................6
Function Buttons ........................................................7
Menu Pages .................................................................7
Scan Page ...............................................................7
Copy Page ..............................................................7
Fax Page..................................................................8
OCR Page ...............................................................8
E-Mail Page ............................................................8
The TWAIN Dialog Box ...................................................9
To Acquire the TWAIN Dialog Box .......................10
Performing a Simple Scan .........................................11
(1) Position the Document .................................11
(2) Preview the Image .........................................11
(3) Select the Scan Size.......................................12
(4) Use the Crop Frame.......................................12
(5) Set the Scan Mode ........................................12
(6) Set the Resolution ........................................12
(7) Execute the Scan............................................12
The TWAIN Dialog Box (Details) ............................... 13`
The Preview Window and Buttons .........................14
The Image Setting Buttons ......................................16
Scan Settings..............................................................17
The Main Tab.......................................................17
The Enhance Tab.................................................20
The Filters Tab .....................................................23
About Tab ............................................................24
Using Batch Scan ......................................................25
Batch Scan Controls ...........................................25
Batch Scan Status ...............................................26
To Perform a Batch Scan ...................................26
Appendices
A: Scanning Tips .......................................................27
B: Troubleshooting ...................................................28
Table of Contents
4
ScanningMethods
Thereare twoseparatemethods toscanan image.TheScan dialogboxwhichis ideal for quick andsimplescans and
the TWAIN dialog box which offers more control over the output. The following pages contain more details about
these different scanning methods.
Scan Dialog Box TWAIN Dialog Box
5
TheScanDialogBox
The Scan dialog box allows you to perform several
functions using your scanner (e.g. scan, copy, and fax).
Simplyselect thefunction thatyou wish touse byclicking
ontheappropriatepageiconand thecorrespondingmenu
pagewill appear. Be sure to make the proper adjustments
in regards to Paper Size, Scan Mode, and/or Resolution
before clicking on the Scan icon.
Scan Page
Icon
Copy Page
Icon
E-Mail Page
Icon
OCR Page
Icon
Fax Page
Icon
Exit
Help
Information
Mailing IconMenu Page
Scan Icon
6
The Scan Dialog Box Item:
Simply click on “Start” on your Windows desktop
and locate the name of your scanner model under
“Programs”. Then double-click the item “Scan Dialog
Box”.
TheDirect ScanIcon:
Double-click the Direct Scan icon located in your
Windows taskbar and the Scan dialog box opens.
To Acquire the Scan Dialog Box
OR
7
Menu Pages
Scan Page:
Scan an image or document to the computer via any
image editing software.
Use the Browseicontoselecttheimage-editing
software from your
computer. iPhoto
Plusisautomatically
installed as your
default software
(i.e. IPPLUS.EXE).
Click the Scan icon to begin scanning!
Copy Page:
Copy an image or document to your printer.
Prior to scanning, use the Print icon to select
the appropriate
printer from within
your computer.
Click the Scan icon
to begin copying!
Function Buttons
Scan Icon:
Initializes the function of the Menu page currently
selected (e.g. Copy Page=Copy, Fax Page=Fax).
Exit:
Exits the Scan dialog box.
Help:
Enters the scanner’s on-line help system.
Information:
Shows product information.
8
E-MailPage:
Scan and send an image or document to the Internet
using your SMTP address/account.
Enteryour SMTP address, the
destination address (To:), and
your full address (From:).
(For SMTP details, contact your Internet Service Provider)
Clicking the Mailing icon opens the Mailbox,
which allows you to
type an attachment.
Clicking the To:
button opens the
Address book, which
allows you to store
addresses and add
additional destination
addresses to your e-mail.
Click the Scan icon to begin sending your information
across the Internet!
OCRPage:
Convert an image document to a text file using
TextBridge.
Click the Scan icon to execute the OCR function!
TextBridge will automatically open showing an image
thumbnail of the scanned document. Save the
document as desired, then open the document using
your word processing software.
Fax Page:
Scan and fax an image or document via your fax
modem.
Prior to scanning, use the Print icon to select the
appropriate printer
(Faxdriver)fromyour
computer.
Click the Scan icon
to begin faxing!
9
TheTWAINDialog Box
The TWAIN dialog box is another scanning option
provided with your scanner. TWAIN is an industry
standard that allows scanning directly into any TWAIN-
compliant software. It eliminates most compatibility
problems associated with software and input devices
supplied by different vendors.
You can access the TWAIN dialog box from within most
image editing software such as the application software
bundled with the scanner (e.g. Photo Express).
10
To Acquire the TWAIN DialogBox
You can acquire the TWAIN dialog box from within any
TWAIN-compliant software (i.e. Photo Express). To
acquire the TWAIN dialog box, using Photo Express as
an example, the steps are:
1. LaunchWindows.
2. Launch Photo Express (TWAIN-compliant program).
3. Under the File menu, open the Acquire command and
choose Scanner OR Click the Scanner icon. The
Select Data Source dialog box appears.
4. Choose your scanner in the Select Data Source dialog
box. If there is only one source available, it is
automatically selected.
5. Click the Acquire button.
The Select Data Source dialog box closes.
TheTWAIN dialog box appears.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Software de Mustek
Manuales populares de Software de otras marcas
PS Audio
PS Audio PowerPlay Manual del propietario
Brady
Brady LOCKOUT PRO 3.0 Manual de servicio
Avaya
Avaya Interaction Center Manual de usuario
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manual
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario
Oracle
Oracle Application 9i Manual de usuario
Acer
Acer RDM Manual de usuario
Canon
Canon Vixia HF21 Manual de usuario
Canon
Canon ZR950 Manual de usuario
Samsung
Samsung Auto Backup Manual de usuario
Polycom
Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manual de usuario