Moxa Technologies ToughNet TN-5508 Series Manual

Moxa ToughNet Switch

TN-5508/5510 Series

Layer 2 M12 managed 8/8+2G-port Ethernet switches

Hardware Installation Guide

First Edition, October 2009

Reproduction without permission is prohibited.

P/N: 1802055080011

—1 —

Overview

The ToughNet TN-5508/5510 series M12 managed Ethernet switches are

designed for industrial applications in harsh environments. The TN series

switches use M12 and other circular connectors to ensure tight, robust

connections, and guarantee reliable operation against environmental

disturbances, such as vibration and shock. The wide selection of 12/24/36/48

VDC, 72/96/110 VDC, or 110/220 VDC/VAC dual redundant power supplies

increases the reliability of your communications. TN-5508 switches provide

up to 8 fast Ethernet M12 ports.

TN-5510 switches provide up to 16 fast Ethernet M12 ports, and 2 Gigabit

Ethernet ports on the bottom panel which provide an optional bypass relay

function. Models with an extended operating temperature range of -40 to

75°C are also available. The TN-5508/5510 series Ethernet switches are

compliant with EN50155/50121-3-2/50121-4 (railway applications), NEMA

TS2 (traffic control systems), and e-Mark (vehicles) requirements, making

the switches suitable for a variety of industrial applications.

Package Checklist

Your ToughNet TN-5508/5510 switch is shipped with the following items. If

any of these items is missing or damaged, please contact your customer

service representative for assistance.

y1 Moxa ToughNet switch.

yHardware installation guide.

yCD-ROM with user’s manual, Windows utility, and SNMP MIB file.

yMoxa product warranty statement.

yM12 to DB9 console port cable.

y2 protective caps for console and relay output ports.

yPanel mounting kit.

Features

Anti-Vibration Circular Connectors for Robust Links

yM12 D-coding 4 pins female connectors for Fast Ethernet 10/100BaseT(X)

ports.

yCircular connectors (RJ45-type) for Gigabit Ethernet

10/100/1000BaseT(X) ports.

yM12 A-coding 5 pins male connectors for console and relay output.

yM23 5 pins male connector for power input.

Dual, Isolated Redundant Power Inputs

y2 Gigabit Ethernet ports for flexibility with high bandwidth requirements.

yBypass relay function on the 2 Gigabit Ethernet ports to ensure data

communications even if an individual device fails.

ySupports 12/24/36/48 VDC (8.4–60 VDC).

ySupports 72/110 VDC (50.4–54 VDC), isolated.

ySupports 110/220 VDC/VAC (88–300VDC, 85–264 VAC), isolated.

yDual redundant, parallel load-sharing power supplies.

—2 —

High Performance Network Switching Technology

yIPv6 Ready logo awarded (IPv6 Logo Committee certified).

yIEEE 1588 PTP (Precision Time Protocol) for precise time

synchronization of networks.

yDHCP Option 82 for IP address assignment with different policies.

yModbus/TCP industrial Ethernet protocol.

yTurbo Ring, Turbo Chain,and RSTP/STP (IEEE802.1w/D).

yIGMP Snooping and GMRP for filtering multicast traffic from industrial

Ethernet protocols.

yPort-based VLAN, IEEE802.1Q VLAN, and GVRP protocol to ease

network planning.

yQoS (IEEE802.1p/1Q and TOS/DiffServ) to increase determinism.

y802.3ad, LACP for optimum bandwidth utilization.

yIEEE802.1X and https/SSL to enhance network security.

ySNMP v1/v2c/v3 for different levels of network management.

yRMON for efficient network monitoring and proactive capability.

yBandwidth management prevents unpredictable network status.

yLock port allows access by only authorized MAC addresses.

yPort mirroring for online debugging.

yAutomatic warning by exception through email, relay output.

yAutomatic recovery of connected device’s IP addresses.

yLine-swap fast recovery.

yLLDP for automatic topology discovery in network management software.

yConfigurable through Web browser, Telnet/Serial console, and Windows

utility.

Designed for Industrial-Specific Applications

yThree rotary switches for setting the last 3 digits of the IP address makes

maintenance even easier.

yEN 50155/50121-3-2/50121-4, NEMA TS2, and e-Mark compliant.

y-40 to 75°C operating temperature range (for “-T” models).

yIP54/IP67, rugged high-strength case.

yPanel mounting or DIN-Rail mounting installation capability.

Recommended Optional Accessories

yCBL-M23(FF5P)Open-BK-100-IP67: 1-meter M23-to-5-pin power cable

with IP67-rated female 5-pin M23 connector.

yCBL-M12D(MM4P)/RJ45-100 IP67: 1-meter M12-to-RJ45 Cat-5E UTP

Ethernet cable with IP67-rated male 4-pin M12 D-coded connector.

yCBL-M12(FF5P)/OPEN-100 IP67: 1-meter M12-to-5-pin power cable

with IP67-rated female 5-pin M12 A-coded connector.

yM12D-4P-IP68: Field-installable M12 D-coded screw-in connector, male

4-pin, IP68-rated.

yM12A-5P-IP68: Field-installable M12 A-coded screw-in connector,

female 5-pin, IP68-rated.

yA-CAP-M12F-MIP67-PAK04: Cap for M12 D-coded male 4-pin

connector, metal, IP67, 4 pieces in one pack.

—3 —

yDK-DC50131: DIN-Rail mounting kit, 50 x 131 mm.

yA-PLG-WPRJ-02: Field-installable circular connector kit for RJ45

twisted-pair cable, IP67-rated.

TN-5508 Panel Layouts

Top View

Front View

Botton View

Rear View

8 9 10 11 12

1. 3 Rotary switches and protective cover with Model name.

2. Screw holes for panel mounting kit.

3. Console port.

4. Grounding screw.

5. Relay output port.

—4 —

6. Power input voltage range indication.

7. Power input port (male 5-pin shielded M23 connector).

8. PWR1 LED: for power input 1.

9. PWR2 LED: for power input 2.

10. FAULT LED.

11. MSTR/HEAD LED: for ring master or chain head.

12. CPLR/TAIL LED: for ring coupler or chain tail.

13. TP port’s 10/100 Mbps LED.

14. 10/100BaseT(X) port (female 4-pin shielded M12 connector with D

coding).

15. Waterproof vent.

16. Product label.

17. 12 Screw holes for DIN-Rail mounting kit.

18. E1 LED: Not used by the TN-5508 series.

19. E2: LED: Not used by the TN-5508 series.

—5 —

TN-5510 Panel Layouts

Top View

Front View

Botton View

Rear View

8 9 10 11 12

1. 3 Rotary switches and protective cover with Model name.

2. Screw holes for panel mounting kit.

3. Console port.

4. Grounding screw.

5. Relay output port.

6. Power input voltage range indication.

7. Power input port (male 5-pin shielded M23 connector).

—6 —

8. PWR1 LED: for power input 1.

9. PWR2 LED: for power input 2.

10. FAULT LED.

11. MSTR/HEAD LED: for ring master or chain head.

12. CPLR/TAIL LED: for ring coupler or chain tail.

13. TP port’s 10/100 Mbps LED.

14. 10/100BaseT(X) port (female 4-pin shielded M12 connector with D

coding).

15. Waterproof vent.

16. Product label.

17. 12 Screw holes for DIN-Rail mounting kit.

18. E1 LED: Down-side E1 Gigabit port's 10/100/1000 Mbps LED.

19. E2: LED: Down-side E2 Gigabit port's 10/100/1000 Mbps LED.

20. Gigabit Ethernet port E1 (corresponding to port 17 in the TN-5510

User's Manual).

21. Gigabit Ethernet port E2 (corresponding to port 18 in the TN-5510

User's Manual).

ATTENTION

Please DO NOT open or remove vent 15. The warranty will be

invalid if the seal is removed.

All exposed connectors, including 3, 5, 7, and 14, should be

tightly covered by protective caps when they are not in use to

ensure for IP54/IP67 protection.

After setting rotary switch 1, the protective cover must be fixed

properly to ensure IP54/IP67 protection.

—7 —

Mounting Dimensions (unit = mm)

TN-5508 Series

—8 —

TN-5510 Series

—9 —

Panel/Wall Mounting

STEP 1:

Mounting the TN-5508/5510 to a wall requires 4 screws. Use the ToughNet

switch as a guide to mark the correct positions of the 4 screws.

STEP 2:

Use the 4 screws in the panel mounting kit. If you

would like to use your own screws, make sure the

screw head is between 6.0 mm and 7.0 mm in

diameter and the shaft is less than 4.0 mm in diameter,

as shown at the right.

Do not screw the screws in all the way—leave a space of about 2 mm to

allow room for sliding the ToughNet switch between the wall and the screws.

NOTE Before tightening the screws into the wall, make sure the screw

head and shaft size are suitable by inserting the screw through one

of the keyhole-shaped apertures of the ToughNet switch.

STEP 3:

Once the screws are fixed in the wall, hang the ToughNet switch on the 4

screws through the large opening of the keyhole-shaped apertures, and then

slide the switch downwards. Tighten the four screws for added stability.

NOTE To provide greater protection from vibrations and shocks, use

screws with shaft diameter between 6.0 mm and 7.0 mm, and fix

the ToughNet switch onto the wall directly through the large

opening of the keyhole-shaped apertures.

DIN-Rail Mounting (optional)

Use a pair of optional DK-DC50131

DIN-Rail mounting kits (must be

purchased separately) to mount the

TN-5508/5510 on a 35 mm DIN-Rail.

STEP 1:

Use 12 screws (6 screws per plate) to

attach the two DIN-Rail attachment

plates to the rear panel of the switch

Recessed button

Spring-loaded bracket

6.0 - 7.0 mm

< 4.0 mm

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Moxa Technologies

Moxa Technologies

Moxa Technologies EDS-505A Series Manual

Moxa Technologies

Moxa Technologies EDS-P206A-4PoE-SS-SC Manual

Moxa Technologies

Moxa Technologies EDS-510E Series Manual de usuario

Moxa Technologies

Moxa Technologies IKS-6728-8PoE Manual

Moxa Technologies

Moxa Technologies EDS-G4014 Series Manual de usuario

Moxa Technologies

Moxa Technologies ICS-G7526 Series Manual

Moxa Technologies

Moxa Technologies PT-G7828 Manual de usuario

Moxa Technologies

Moxa Technologies EtherDevice EDS-205 Manual de usuario

Moxa Technologies

Moxa Technologies EtherDevice EDS-G500E Series Manual de usuario

Moxa Technologies

Moxa Technologies NSwitch Outdoors Manual de usuario

Moxa Technologies

Moxa Technologies IESH-MB205G-C2E-R Series Manual de usuario

Moxa Technologies

Moxa Technologies PT-7528 Manual

Moxa Technologies

Moxa Technologies TN-5308-LV-T Manual de usuario

Moxa Technologies

Moxa Technologies EDS-G205-1GTXSFP-T Manual

Moxa Technologies

Moxa Technologies NPORT 6610 Manual de usuario

Moxa Technologies

Moxa Technologies EDS-405A Manual de usuario

Moxa Technologies

Moxa Technologies EtherDevice EDS-30 Manual

Moxa Technologies

Moxa Technologies EDS-516A Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 1220 Manual de usuario

Moxa Technologies

Moxa Technologies IKS-6700A series Manual

Moxa Technologies

Moxa Technologies PT-G7509 Manual

Moxa Technologies

Moxa Technologies PT-7528 Manual

Moxa Technologies

Moxa Technologies EtherDevice EDS-510A Series Manual

Moxa Technologies

Moxa Technologies EDS-316 EtherDevice Manual

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario