Moxa Technologies EOM-G103-PHR-PTP Series Manual de usuario

– 1 – – 2 – – 3 –

EOM-G103-PHR-PTP Series

Quick Installation Guide

First Edition, January 2015

Product Overview

The EOM-G103-PHR-PTP full Gigabit managed redundancy

modules are compliant with the latest IEC 62439-3 standards and

provide an easy and cost-effective integrated solution for adding a

redundancy module to a non-IEC 62439-3 supported product. The

modules support two IEC 62439-3 Ethernet ports

(SGMII/SERDES(1000Base-X) interface) for constructing PRP or

HSR networks and one standard Ethernet port

(SGMII/SERDES(1000Base-X) interface) for connecting with

standard IEEE 802.3 Ethernet devices. The EOM-G103-PHR-PTP

series also provides an extra standard Ethernet port

(SGMII/SERDES(1000Base-X) interface) for building up a local

access Ethernet console port to easily maintain, control, and

manage certain devices right at the local site.

Package Checklist

The EOM-G103-PHR-PTP series evaluation kit packet contains the

following items:

•1 EOM-G103-PHR-PTP embedded module

•1 EOM-G103-PHR-PTP evaluation board

•1 universal power adapter

•2 power cords

•1 cross-over Ethernet cable

•1 USB-IF complaint cable

•Warranty card

Layout of the Evaluation Board

1. 12 VDC power jack

2. System reboot button

3. JP2 connector for connecting to EOM-G103 JP2

4. JP1 connector for connecting to EOM-G103 JP1

5. Terminal block for DI and Relay

6. USB storage (ABC-02-USB-T)

7. USB console

8. Reset to default button

9. Ethernet Console port: 10/100/1000BaseT(X)

10. Interlink port: 10/100/1000BaseT(X)

11. PRP/HSR redundant port B: 10/100/1000BaseT(X)

12. PRP/HSR redundant port A: 10/100/1000BaseT(X)

13. Interlink port: 100/1000BaseFX

14. PRP/HSR redundant port B: 100/1000BaseFX

15. PRP/HSR redundant port A: 100/1000BaseFX

16. Interlink port LED

17. Ethernet console port LED

18. Port B LED

19. Port A LED

20. HSR mode LED

21. PRP mode LED

22. Fault LED

23. STATE LED

24. Power LED

Layout of the EOM-G103-PHR-PTP Series

Hardware Installation Procedure

(Before installing the EOM-G103, please check to make sure that

all items in the Package Checklist are in the box.)

Step 1: Connect the EOM-G103-PHR-PTP module into the

sockets on the top of the evaluation board

Step 2: Connect the power source to the evaluation board

Connect the 12 VDC power line to the evaluation board’s power

jack.

Step 3: Connect the network cable to the evaluation board

Use the RJ45 Ethernet cable to connect the Ethernet cable to the

evaluation Ethernet console port.

Step 4: Set up the connected device IP address

Configure the IP address for the connected device so that the

device belongs to the EOM-G103’s Subnet. The default IP address

of the EOM-G103 is 192.168.127.253 and the subnet mask is

255.255.255.0.

Step 5: Configure the EOM-G103 Series

Please refer to the EOM-G103 user’s manual

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Pin Assignment

JP1 (2x40 connector pin assignment)

SIGNAL

GND

PRP_LED

GND

DTR (UART)

FAULT_LED

DCD (UART)

Reserved

RTS (UART)

STAT_R_LED

DSR (UART)

Reserved

TXD (UART)

STAT_G_LED

CTS (UART)

Reserved

GND

TX_DIS_G3 (SFP)

RXD (UART)

GND

GXB_RX_P_0 (SGMII)

PRESENT_G3 (SFP)

GND

Reserved

GXB_RX_N_0 (SGMII)

LOS_G3(SFP)

GXB_TX_P0 (SGMII)

Reserved

GND

TX_DIS_G2 (SFP)

GXB_TX_N0 (SGMII)

GND

GXB_RX_P_1 (SGMII)

PRESENT_G2 (SFP)

GND

SDA-(I2C)

GXB_RX_N_1 (SGMII)

LOS_G2(SFP)

GXB_TX_P1 (SGMII)

SCK-(I2C)

GND

TX_DIS_G1 (SFP)

GXB_TX_N1 (SGMII)

GND

GXB_RX_P_2 (SGMII)

PRESENT_G1 (SFP)

GND

MDIO-PHY (SMI)

GXB_RX_N_2 (SGMII)

LOS_G1(SFP)

GXB_TX_P2 (SGMII)

MDC-PHY (SMI)

GND

TX_DIS_G0 (SFP)

GXB_TX_N2 (SGMII)

GND

GXB_RX_P_3 (SGMII)

PRESENT_G0 (SFP)

GND

Reserved

GXB_RX_N_3 (SGMII)

LOS_G0(SFP)

GXB_TX_P3 (SGMII)

Reserved

GND

Reserved

GXB_TX_N3 (SGMII)

GND

COUP_LED

Reserved

GND

USB-HOST-DP

QB_LED

Reserved

DO(1)

USB-HOST-DM

HSR_LED

Reserved

DO(0)

GND

JP2 (2x10 connector pin assignment)

SIGNAL

Reserved

3.3V

Reserved

GND

Reserved

GND

Reserved

GND

Reserved

GND

Reserved

GND

3.3V

Reset_PHY

3.3V

Reset

3.3V

Reserved

3.3V

Reset to Default

Otros manuales para EOM-G103-PHR-PTP Series

Tabla de contenidos

Otros manuales de Hardware de red de Moxa Technologies

Moxa Technologies

Moxa Technologies MAR-2000 Manual de usuario

Moxa Technologies

Moxa Technologies NPort Express DE-211 Manual de usuario

Moxa Technologies

Moxa Technologies C320Turbo/PCIEL Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5200 Series Manual de usuario

Moxa Technologies

Moxa Technologies RNAS-1200 Manual de usuario

Moxa Technologies

Moxa Technologies DA-661-CE Manual de usuario

Moxa Technologies

Moxa Technologies UC-8580 Series Instrucciones de uso

Moxa Technologies

Moxa Technologies TRC-2190 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5110 Series Manual de usuario

Moxa Technologies

Moxa Technologies TAP-125 Series Manual de usuario

Moxa Technologies

Moxa Technologies AWK-3252A Series Manual de usuario

Moxa Technologies

Moxa Technologies INJ-24A Series Manual

Moxa Technologies

Moxa Technologies NE-4100 Series Manual de usuario

Moxa Technologies

Moxa Technologies MRC-1002 Series Guía de inicio rápido

Moxa Technologies

Moxa Technologies NPort IA 5250 series Manual de usuario

Moxa Technologies

Moxa Technologies UC-7110 Series Manual de usuario

Moxa Technologies

Moxa Technologies ioMirror E3210 Manual de usuario

Moxa Technologies

Moxa Technologies PT-G510 Series Manual de usuario

Moxa Technologies

Moxa Technologies DA-660-LX Manual de usuario

Moxa Technologies

Moxa Technologies MiiNePort E3 Series Manual de usuario

Moxa Technologies

Moxa Technologies AWK-6232-M12 Manual de usuario

Moxa Technologies

Moxa Technologies AirWorks AWK-5222 Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5610-8 Manual de usuario

Moxa Technologies

Moxa Technologies ThinkCore DA-660-8-CE Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario