Moxa Technologies UC-8580 Series Instrucciones de uso

UC-8580 Series Hardware User Manual

Version 2.1, November 2022

www.moxa.com/product

UC-8580 Series Hardware User Manual

The software described in this manual is furnished under a license agreement and may be used only in accordance

with the terms of that agreement.

Trademarks

The MOXA logo is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

•Information in this document is subject to change without notice and does not represent a commitment

on the part of Moxa.

•Moxa provides this document as is, without warranty of any kind, either expressed or implied, including,

but not limited to, its particular purpose. Moxa reserves the right to make improvements and/or

changes to this manual, or to the products and/or the programs described in this manual, at any time.

•Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no

responsibility for its use, or for any infringements on the rights of third parties that may result from its

use.

•This product might include unintentional technical or typographical errors. Changes are periodically

made to the information herein to correct such errors, and these changes are incorporated into new

editions of the publication.

Technical Support Contact Information

www.moxa.com/support

Table of Contents

1. Introduction .........................................................................................................................................4

Model Descriptions and Package Checklist.................................................................................................4

Product Features ................................................................................................................................... 5

Specifications ........................................................................................................................................ 5

Hardware Block Diagram ........................................................................................................................5

2. Hardware Introduction .........................................................................................................................6

Appearance........................................................................................................................................... 6

Dimensions ........................................................................................................................................... 7

LED Indicators.......................................................................................................................................8

Reset Button ......................................................................................................................................... 8

3. Hardware Connection Description.........................................................................................................9

Installing the UC-8580 Series.................................................................................................................. 9

Wiring Requirements..............................................................................................................................9

Connecting the Power ................................................................................................................... 10

Grounding the Unit ....................................................................................................................... 11

Connecting Data Transmission Cables .................................................................................................... 12

Connecting to an Ethernet Network ................................................................................................ 12

Connecting to a Serial Device ........................................................................................................ 13

Connecting Digital Input/Output Devices ......................................................................................... 13

Connecting a USB Device .............................................................................................................. 14

Connecting Wi-Fi/Cellular Modules and Installing Antennas ....................................................................... 15

Installing SIM Cards for the Cellular Modules........................................................................................... 20

Installing the mSATA Module................................................................................................................. 21

UC-8580 Series Hardware User Manual

1. Introduction

Thank you for using Moxa’s UC-8580 Series computer. The UC-8580 Series computer is a programmable

communication-centric gateway offering a rich variety of communication interfaces such as Ethernet, serial,

and digital inputs/outputs. This EN 50155-compliant computer is built for rail applications and comes with

multiple wireless WAN gateway interfaces making it an ideal choice for building wireless communication

infrastructure with 802.11 a/b/g/n/ac, and for LTE data collection and transmission.

This computer runs on the Debian Linux operating system, providing a powerful communication platform

without generating too much heat, even when loaded with heavy application tasks. In addition, the mSATA

socket helps you easily expand the storage capacity for large-scale data acquisition.

The UC-8580 comes in two front-panel models to support two types of antenna connectors (SMA and QMA)

for wireless modules.

This chapter describes the product package checklist, product features, and hardware specifications.

Model Descriptions and Package Checklist

The UC-8580 Series comprises the following models:

•UC-8580-LX: Programmable multiple-wireless computing platform for rail onboard applications,

supporting up to 4 wireless modules with SMA connectors, and a -25 to 55°C operating temperature

range

•UC-8580-T-LX: Programmable multiple-wireless computing platform for rail onboard applications,

supporting up to 4 wireless modules with SMA connectors, and a -40 to 70°C operating temperature

range

•UC-8580-T-CT-LX: Programmable multiple-wireless computing platform for rail onboard applications,

supporting up to 4 wireless modules with SMA connectors, and a -40 to 70°C operating temperature

range, and conformal coating

•UC-8580-Q-LX: Programmable multiple-wireless computing platform for rail onboard applications,

supporting up to 4 wireless modules with QMA connectors, -25 to 55°C operating temperature range

•UC-8580-T-Q-LX: Programmable multiple-wireless computing platform for rail onboard applications,

supporting up to 4 wireless modules with QMA connectors, -40 to 70°C operating temperature range

•UC-8580-T-CT-Q-LX: Programmable multiple-wireless computing platform for rail onboard

applications, supporting up to 4 wireless modules with QMA connectors, with -40 to 70°C operating

temperature range and conformal coating

The UC-8580 Series computer is shipped with the following items:

•UC-8580 Series computer

•CBL-4PINDB9F-100: 4-pin pin header to DB9 female console port cable, 100 cm

•Quick Installation Guide (printed)

•Warranty card

UC-8580 Series Hardware User Manual

Product Features

The UC-8580 Series computer includes the following features:

•Armv7 Cortex-A7 dual-core 1 GHz processor

•1 GB DDR3L SDRAM

•8 GB eMMC for OS

•1 mSATA slot for expansion storage

•2 auto-sensing 10/100/1000 Mbps Ethernet M12 ports

•1 USB 3.0/2.0 host with Type A connector

•Up to 4 PCIe mini slots (1 PCIe/USB 2.0 and 3 USB 2.0 signals)

•Isolated power input with a wide range of 24 to 110 VDC

Specifications

NOTE

The latest specifications for Moxa’s products can be found at https://www.moxa.com.

Hardware Block Diagram

UC-8580 Series Hardware User Manual

2. Hardware Introduction

The UC-8580 computer is compact and designed to be rugged enough for industrial applications. This

chapter provides information on the appearance and dimensions of the UC-8580 and describes the LED

indicators, reset button, and RTC that can help you monitor system performance and identify issues. The

multiple serial ports on the UC-8580 allow you to connect different devices for wireless operation, and the

reliable and stable hardware platform lets you devote your attention to developing your applications.

Appearance

Front View

SMA Model

UC-8580 Series Hardware User Manual

QMA Model

Dimensions

Units: mm (in)

UC-8580 Series Hardware User Manual

LED Indicators

LED Name

Status

Function

Green

Power is on

Off

No power input or any other power-input error

Green

System is ready

Off

System is booting, OS boot-up failure, or any other system

initialization error

Ethernet

(located next to the

Ethernet ports)

Green

Steady On: 100 Mbps Ethernet link

Blinking: Data transmission is in progress

Yellow

Steady On: 1000 Mbps Ethernet link

Blinking: Data transmission is in progress

Off

Data transmission speed at 10 Mbps or the cable is not connected

Serial

Green

Tx: Data transmission is in progress

Yellow

Rx: Receiving Data

Off No operation on the serial ports

Green

Data is being accessed from either the eMMC or the mSATA module

Off

No data is being accessed

PGM

Red

Programmable LED for user-defined function

Wireless

Green

The number of glowing LEDs indicate the wireless signal strength as

follows:

3 Green: Excellent

2 Green: Good

1 Green: Poor

Off

No wireless signal

Reset Button

Press the Reset button on the front panel of the UC-8580 computer to set the system to the factory default

values and reboot the system automatically. The RLED will flash for 5 seconds and then maintain a steady

glow when the system has rebooted. All system configurations will be reset to the factory default once the

computer restarts. The illustration below shows an SMA model.

UC-8580 Series Hardware User Manual

3. Hardware Connection Description

In this chapter, we show how to connect the UC-8580 computer to the network and to various devices.

Installing the UC-8580 Series

Wall or Cabinet Mounting

Use two screws per side to mount the UC-8580 computer on to a wall or in a cabinet. The illustration below

shows an SMA model.

Wiring Requirements

Be sure to read and follow these common safety precautions before proceeding with the installation of any

electronic device:

•Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must

cross, make sure the wires are perpendicular at the intersection point.

NOTE

Do not run the wires for signal or communication and power wiring in the same wire conduit. To avoid

interference, wires with different signal characteristics should be routed separately.

•Use the type of signal transmitted through a wire to determine which wires should be kept separate.

The rule of thumb is that wiring that shares similar electrical characteristics can be bundled together.

•Keep input wiring and output wiring separate.

•It is advisable to label the wiring to all devices in the system for easy identification.

UC-8580 Series Hardware User Manual

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or wiring your UC-8580 computer.

Wiring Caution!

Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes

dictating the maximum current allowable for each wire size. If the current goes above the maximum

ratings, the wiring could overheat, causing serious damage to your equipment.

Temperature Caution!

Be careful when handling the unit. When the unit is plugged in, the internal components generate heat,

and consequently the outer casing may feel hot to the touch.

Connecting the Power

Connect the 24 to 110 VDC power line with M12 A-coded connector to the UC-8580 Series computer. If the

power is supplied properly, the P LED will glow a solid green after a 25 to 30-second delay. The power input

location and pin definition are shown in the following figures:

Otros manuales para UC-8580 Series

Tabla de contenidos

Otros manuales de Hardware de red de Moxa Technologies

Moxa Technologies

Moxa Technologies TRC-2190 Series Manual de usuario

Moxa Technologies

Moxa Technologies EOM-G103-PHR-PTP Series Manual de usuario

Moxa Technologies

Moxa Technologies AWK-6232-M12 Manual de usuario

Moxa Technologies

Moxa Technologies C320Turbo/PCIEL Manual de usuario

Moxa Technologies

Moxa Technologies MAR-2000 Manual de usuario

Moxa Technologies

Moxa Technologies IA3341 Instrucciones de uso

Moxa Technologies

Moxa Technologies NPort IA 5250 series Manual de usuario

Moxa Technologies

Moxa Technologies TAP-125 Series Manual de usuario

Moxa Technologies

Moxa Technologies V91 Guide Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5200 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5110 Series Manual de usuario

Moxa Technologies

Moxa Technologies airworks awk-5232 Manual de usuario

Moxa Technologies

Moxa Technologies AWK Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort Express DE-211 Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5410 Manual de usuario

Moxa Technologies

Moxa Technologies UC-7110 Series Manual de usuario

Moxa Technologies

Moxa Technologies DA-661-CE Manual de usuario

Moxa Technologies

Moxa Technologies RNAS-1200 Manual de usuario

Moxa Technologies

Moxa Technologies NPort W2150A-W4 Series Manual de usuario

Moxa Technologies

Moxa Technologies AirWorks AWK-1137C Manual de usuario

Moxa Technologies

Moxa Technologies DA-660-LX Manual de usuario

Moxa Technologies

Moxa Technologies MRC-1002 Series Guía de inicio rápido

Moxa Technologies

Moxa Technologies AirWorks AWK-5222 Manual de usuario

Moxa Technologies

Moxa Technologies INJ-24A Series Manual

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario