Moxa Technologies EOM-G103-PHR-PTP Series Manual de usuario

P/N: 1802001030011

*1802001030011*

EOM-G103-PHR-PTP Series

Quick Installation Guide

Version 1.1, January 2021

Technical Support Contact Information

www.moxa.com/support



- 2 -

Product Overview

The EOM-G103-PHR-PTP full Gigabit managed redundancy modules are

compliant with the latest IEC 62439-3 standards and provide an easy and

cost-effective integrated solution for adding a redundancy module to a

non-IEC 62439-3 supported product. The modules support two IEC

62439-3 Ethernet ports (SGMII/SERDES(1000Base-X) interface) for

constructing PRP or HSR networks and one standard Ethernet port

(SGMII/SERDES(1000Base-X) interface) for connecting with standard

IEEE 802.3 Ethernet devices. The EOM-G103-PHR-PTP series also

provides an extra standard Ethernet port (SGMII/SERDES(1000Base-X)

interface) for building up a local access Ethernet console port to easily

maintain, control, and manage certain devices right at the local site.

Package Checklist

The EOM-G103-PHR-PTP series evaluation kit packet contains the

following items:

•1 EOM-G103-PHR-PTP embedded module

•1 EOM-G103-PHR-PTP evaluation board

•1 universal power adapter

•2 power cords

•1 cross-over Ethernet cable

•1 USB-IF complaint cable

•Warranty card

- 3 -

Layout of the Evaluation Board

1. 12 VDC power jack

2. System reboot button

3. JP2 connector for connecting to EOM-G103 JP2

4. JP1 connector for connecting to EOM-G103 JP1

5. Terminal block for DI and Relay

6. USB storage (ABC-02-USB-T)

7. USB console

8. Reset to default button

9. Ethernet Console port: 10/100/1000BaseT(X)

10. Interlink port: 10/100/1000BaseT(X)

11. PRP/HSR redundant port B: 10/100/1000BaseT(X)

12. PRP/HSR redundant port A: 10/100/1000BaseT(X)

13. Interlink port: 100/1000BaseFX

14. PRP/HSR redundant port B: 100/1000BaseFX

15. PRP/HSR redundant port A: 100/1000BaseFX

16. Interlink port LED

17. Ethernet console port LED

18. Port B LED

19. Port A LED

20. HSR mode LED

21. PRP mode LED

22. Fault LED

23. STATE LED

24. Power LED

- 4 -

Layout of the EOM-G103-PHR-PTP Series

Hardware Installation Procedure

(Before installing the EOM-G103, please check to make sure that all items

in the Package Checklist are in the box.)

Step 1: Connect the EOM-G103-PHR-PTP module into the sockets

on the top of the evaluation board

Step 2: Connect the power source to the evaluation board

Connect the 12 VDC power line to the evaluation board’s power jack.

Step 3: Connect the network cable to the evaluation board

Use the RJ45 Ethernet cable to connect the Ethernet cable to the

evaluation Ethernet console port.

Step 4: Set up the connected device IP address

Configure the IP address for the connected device so that the device

belongs to the EOM-G103’s Subnet. The default IP address of the

EOM-G103 is 192.168.127.253 and the subnet mask is 255.255.255.0.

Step 5: Configure the EOM-G103 Series

Please refer to the EOM-G103 user’s manual

- 5 -

Pin Assignment

JP1 (2x40 connector pin assignment)

SIGNAL

GND

PRP_LED

GND

DTR (UART)

FAULT_LED

DCD (UART)

Reserved

RTS (UART)

STAT_R_LED

DSR (UART)

Reserved

TXD (UART)

STAT_G_LED

CTS (UART)

Reserved

GND

TX_DIS_G3 (SFP)

RXD (UART)

GND

GXB_RX_P_0 (SGMII)

PRESENT_G3 (SFP)

GND

Reserved

GXB_RX_N_0 (SGMII)

LOS_G3(SFP)

GXB_TX_P0 (SGMII)

Reserved

GND

TX_DIS_G2 (SFP)

GXB_TX_N0 (SGMII)

GND

GXB_RX_P_1 (SGMII)

PRESENT_G2 (SFP)

GND

SDA-(I2C)

GXB_RX_N_1 (SGMII)

LOS_G2(SFP)

GXB_TX_P1 (SGMII)

SCK-(I2C)

GND

TX_DIS_G1 (SFP)

GXB_TX_N1 (SGMII)

GND

GXB_RX_P_2 (SGMII)

PRESENT_G1 (SFP)

GND

MDIO-PHY (SMI)

GXB_RX_N_2 (SGMII)

LOS_G1(SFP)

GXB_TX_P2 (SGMII)

MDC-PHY (SMI)

GND

TX_DIS_G0 (SFP)

GXB_TX_N2 (SGMII)

GND

GXB_RX_P_3 (SGMII)

PRESENT_G0 (SFP)

GND

Reserved

GXB_RX_N_3 (SGMII)

LOS_G0(SFP)

GXB_TX_P3 (SGMII)

Reserved

GND

Reserved

GXB_TX_N3 (SGMII)

GND

COUP_LED

Reserved

GND

USB-HOST-DP

QB_LED

Reserved

DO(1)

USB-HOST-DM

HSR_LED

Reserved

DO(0)

GND

- 6 -

JP2 (2x10 connector pin assignment)

SIGNAL

Reserved

3.3V

Reserved

GND

Reserved

GND

Reserved

GND

Reserved

GND

Reserved

GND

3.3V

Reset_PHY

3.3V

Reset

3.3V

Reserved

3.3V

Reset to Default

Otros manuales para EOM-G103-PHR-PTP Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de Moxa Technologies

Moxa Technologies

Moxa Technologies IA3341 Instrucciones de uso

Moxa Technologies

Moxa Technologies NPort 5110 Series Manual de usuario

Moxa Technologies

Moxa Technologies AWK Series Manual de usuario

Moxa Technologies

Moxa Technologies TAP-125 Series Manual de usuario

Moxa Technologies

Moxa Technologies Airworks AWK-3131A-M12-RCC Manual de usuario

Moxa Technologies

Moxa Technologies MRC-1002 Series Guía de inicio rápido

Moxa Technologies

Moxa Technologies NE-4100 Series Manual de usuario

Moxa Technologies

Moxa Technologies DA-660-LX Manual de usuario

Moxa Technologies

Moxa Technologies NPort Express DE-211 Manual de usuario

Moxa Technologies

Moxa Technologies MiiNePort E3 Series Manual de usuario

Moxa Technologies

Moxa Technologies MAR-2000 Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5200 Series Manual de usuario

Moxa Technologies

Moxa Technologies UC-7110 Series Manual de usuario

Moxa Technologies

Moxa Technologies NPort 5610-8 Manual de usuario

Moxa Technologies

Moxa Technologies TRC-2190 Series Manual de usuario

Moxa Technologies

Moxa Technologies UC-7420/7410 Manual de usuario

Moxa Technologies

Moxa Technologies AirWorks AWK-1137C Manual de usuario

Moxa Technologies

Moxa Technologies PT-G510 Series Manual de usuario

Moxa Technologies

Moxa Technologies DA-661-CE Manual de usuario

Moxa Technologies

Moxa Technologies ThinkCore DA-660-8-CE Manual de usuario

Moxa Technologies

Moxa Technologies MXNVR-RO Manual de usuario

Moxa Technologies

Moxa Technologies INJ-24A Series Manual

Moxa Technologies

Moxa Technologies EOM-G103-PHR-PTP Series Manual de usuario

Moxa Technologies

Moxa Technologies NE-4000T Series Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario